mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
0478dac62a
At this point in the conversion there should be no need to have logic to disable some symbol during the SPL build as all symbols should have an SPL counterpart. The main real changes done here are that we now must make proper use of CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we developed prior to CONFIG_IS_ENABLED() being available. Signed-off-by: Tom Rini <trini@konsulko.com>
425 lines
9 KiB
C
425 lines
9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2000
|
|
* Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
|
|
*
|
|
* (C) Copyright 2004
|
|
* ARM Ltd.
|
|
* Philippe Robin, <philippe.robin@arm.com>
|
|
*/
|
|
|
|
/* Simple U-Boot driver for the PrimeCell PL010/PL011 UARTs */
|
|
|
|
#include <common.h>
|
|
#include <asm/global_data.h>
|
|
/* For get_bus_freq() */
|
|
#include <clock_legacy.h>
|
|
#include <dm.h>
|
|
#include <clk.h>
|
|
#include <errno.h>
|
|
#include <watchdog.h>
|
|
#include <asm/io.h>
|
|
#include <serial.h>
|
|
#include <dm/device_compat.h>
|
|
#include <dm/platform_data/serial_pl01x.h>
|
|
#include <linux/compiler.h>
|
|
#include "serial_pl01x_internal.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_SERIAL)
|
|
static volatile unsigned char *const port[] = CFG_PL01x_PORTS;
|
|
static enum pl01x_type pl01x_type __section(".data");
|
|
static struct pl01x_regs *base_regs __section(".data");
|
|
#define NUM_PORTS (sizeof(port)/sizeof(port[0]))
|
|
|
|
#endif
|
|
|
|
static int pl01x_putc(struct pl01x_regs *regs, char c)
|
|
{
|
|
/* Wait until there is space in the FIFO */
|
|
if (readl(®s->fr) & UART_PL01x_FR_TXFF)
|
|
return -EAGAIN;
|
|
|
|
/* Send the character */
|
|
writel(c, ®s->dr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pl01x_getc(struct pl01x_regs *regs)
|
|
{
|
|
unsigned int data;
|
|
|
|
/* Wait until there is data in the FIFO */
|
|
if (readl(®s->fr) & UART_PL01x_FR_RXFE)
|
|
return -EAGAIN;
|
|
|
|
data = readl(®s->dr);
|
|
|
|
/* Check for an error flag */
|
|
if (data & 0xFFFFFF00) {
|
|
/* Clear the error */
|
|
writel(0xFFFFFFFF, ®s->ecr);
|
|
return -1;
|
|
}
|
|
|
|
return (int) data;
|
|
}
|
|
|
|
static int pl01x_tstc(struct pl01x_regs *regs)
|
|
{
|
|
schedule();
|
|
return !(readl(®s->fr) & UART_PL01x_FR_RXFE);
|
|
}
|
|
|
|
static int pl01x_generic_serial_init(struct pl01x_regs *regs,
|
|
enum pl01x_type type)
|
|
{
|
|
switch (type) {
|
|
case TYPE_PL010:
|
|
/* disable everything */
|
|
writel(0, ®s->pl010_cr);
|
|
break;
|
|
case TYPE_PL011:
|
|
/* disable everything */
|
|
writel(0, ®s->pl011_cr);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pl011_set_line_control(struct pl01x_regs *regs)
|
|
{
|
|
unsigned int lcr;
|
|
/*
|
|
* Internal update of baud rate register require line
|
|
* control register write
|
|
*/
|
|
lcr = UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN;
|
|
writel(lcr, ®s->pl011_lcrh);
|
|
return 0;
|
|
}
|
|
|
|
static int pl01x_generic_setbrg(struct pl01x_regs *regs, enum pl01x_type type,
|
|
int clock, int baudrate)
|
|
{
|
|
switch (type) {
|
|
case TYPE_PL010: {
|
|
unsigned int divisor;
|
|
|
|
/* disable everything */
|
|
writel(0, ®s->pl010_cr);
|
|
|
|
switch (baudrate) {
|
|
case 9600:
|
|
divisor = UART_PL010_BAUD_9600;
|
|
break;
|
|
case 19200:
|
|
divisor = UART_PL010_BAUD_19200;
|
|
break;
|
|
case 38400:
|
|
divisor = UART_PL010_BAUD_38400;
|
|
break;
|
|
case 57600:
|
|
divisor = UART_PL010_BAUD_57600;
|
|
break;
|
|
case 115200:
|
|
divisor = UART_PL010_BAUD_115200;
|
|
break;
|
|
default:
|
|
divisor = UART_PL010_BAUD_38400;
|
|
}
|
|
|
|
writel((divisor & 0xf00) >> 8, ®s->pl010_lcrm);
|
|
writel(divisor & 0xff, ®s->pl010_lcrl);
|
|
|
|
/*
|
|
* Set line control for the PL010 to be 8 bits, 1 stop bit,
|
|
* no parity, fifo enabled
|
|
*/
|
|
writel(UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN,
|
|
®s->pl010_lcrh);
|
|
/* Finally, enable the UART */
|
|
writel(UART_PL010_CR_UARTEN, ®s->pl010_cr);
|
|
break;
|
|
}
|
|
case TYPE_PL011: {
|
|
unsigned int temp;
|
|
unsigned int divider;
|
|
unsigned int remainder;
|
|
unsigned int fraction;
|
|
|
|
/* Without a valid clock rate we cannot set up the baudrate. */
|
|
if (clock) {
|
|
/*
|
|
* Set baud rate
|
|
*
|
|
* IBRD = UART_CLK / (16 * BAUD_RATE)
|
|
* FBRD = RND((64 * MOD(UART_CLK,(16 * BAUD_RATE)))
|
|
* / (16 * BAUD_RATE))
|
|
*/
|
|
temp = 16 * baudrate;
|
|
divider = clock / temp;
|
|
remainder = clock % temp;
|
|
temp = (8 * remainder) / baudrate;
|
|
fraction = (temp >> 1) + (temp & 1);
|
|
|
|
writel(divider, ®s->pl011_ibrd);
|
|
writel(fraction, ®s->pl011_fbrd);
|
|
}
|
|
|
|
pl011_set_line_control(regs);
|
|
/* Finally, enable the UART */
|
|
writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE |
|
|
UART_PL011_CR_RXE | UART_PL011_CR_RTS, ®s->pl011_cr);
|
|
break;
|
|
}
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_SERIAL)
|
|
static void pl01x_serial_init_baud(int baudrate)
|
|
{
|
|
int clock = 0;
|
|
|
|
#if defined(CONFIG_PL011_SERIAL)
|
|
pl01x_type = TYPE_PL011;
|
|
clock = CFG_PL011_CLOCK;
|
|
#endif
|
|
base_regs = (struct pl01x_regs *)port[CONFIG_CONS_INDEX];
|
|
|
|
pl01x_generic_serial_init(base_regs, pl01x_type);
|
|
pl01x_generic_setbrg(base_regs, pl01x_type, clock, baudrate);
|
|
}
|
|
|
|
/*
|
|
* Integrator AP has two UARTs, we use the first one, at 38400-8-N-1
|
|
* Integrator CP has two UARTs, use the first one, at 38400-8-N-1
|
|
* Versatile PB has four UARTs.
|
|
*/
|
|
int pl01x_serial_init(void)
|
|
{
|
|
pl01x_serial_init_baud(CONFIG_BAUDRATE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pl01x_serial_putc(const char c)
|
|
{
|
|
if (c == '\n')
|
|
while (pl01x_putc(base_regs, '\r') == -EAGAIN);
|
|
|
|
while (pl01x_putc(base_regs, c) == -EAGAIN);
|
|
}
|
|
|
|
static int pl01x_serial_getc(void)
|
|
{
|
|
while (1) {
|
|
int ch = pl01x_getc(base_regs);
|
|
|
|
if (ch == -EAGAIN) {
|
|
schedule();
|
|
continue;
|
|
}
|
|
|
|
return ch;
|
|
}
|
|
}
|
|
|
|
static int pl01x_serial_tstc(void)
|
|
{
|
|
return pl01x_tstc(base_regs);
|
|
}
|
|
|
|
static void pl01x_serial_setbrg(void)
|
|
{
|
|
/*
|
|
* Flush FIFO and wait for non-busy before changing baudrate to avoid
|
|
* crap in console
|
|
*/
|
|
while (!(readl(&base_regs->fr) & UART_PL01x_FR_TXFE))
|
|
schedule();
|
|
while (readl(&base_regs->fr) & UART_PL01x_FR_BUSY)
|
|
schedule();
|
|
pl01x_serial_init_baud(gd->baudrate);
|
|
}
|
|
|
|
static struct serial_device pl01x_serial_drv = {
|
|
.name = "pl01x_serial",
|
|
.start = pl01x_serial_init,
|
|
.stop = NULL,
|
|
.setbrg = pl01x_serial_setbrg,
|
|
.putc = pl01x_serial_putc,
|
|
.puts = default_serial_puts,
|
|
.getc = pl01x_serial_getc,
|
|
.tstc = pl01x_serial_tstc,
|
|
};
|
|
|
|
void pl01x_serial_initialize(void)
|
|
{
|
|
serial_register(&pl01x_serial_drv);
|
|
}
|
|
|
|
__weak struct serial_device *default_serial_console(void)
|
|
{
|
|
return &pl01x_serial_drv;
|
|
}
|
|
#else
|
|
int pl01x_serial_setbrg(struct udevice *dev, int baudrate)
|
|
{
|
|
struct pl01x_serial_plat *plat = dev_get_plat(dev);
|
|
struct pl01x_priv *priv = dev_get_priv(dev);
|
|
|
|
if (!plat->skip_init) {
|
|
pl01x_generic_setbrg(priv->regs, priv->type, plat->clock,
|
|
baudrate);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int pl01x_serial_probe(struct udevice *dev)
|
|
{
|
|
struct pl01x_serial_plat *plat = dev_get_plat(dev);
|
|
struct pl01x_priv *priv = dev_get_priv(dev);
|
|
|
|
priv->regs = (struct pl01x_regs *)plat->base;
|
|
priv->type = plat->type;
|
|
if (!plat->skip_init)
|
|
return pl01x_generic_serial_init(priv->regs, priv->type);
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
int pl01x_serial_getc(struct udevice *dev)
|
|
{
|
|
struct pl01x_priv *priv = dev_get_priv(dev);
|
|
|
|
return pl01x_getc(priv->regs);
|
|
}
|
|
|
|
int pl01x_serial_putc(struct udevice *dev, const char ch)
|
|
{
|
|
struct pl01x_priv *priv = dev_get_priv(dev);
|
|
|
|
return pl01x_putc(priv->regs, ch);
|
|
}
|
|
|
|
int pl01x_serial_pending(struct udevice *dev, bool input)
|
|
{
|
|
struct pl01x_priv *priv = dev_get_priv(dev);
|
|
unsigned int fr = readl(&priv->regs->fr);
|
|
|
|
if (input)
|
|
return pl01x_tstc(priv->regs);
|
|
else
|
|
return fr & UART_PL01x_FR_TXFF ? 0 : 1;
|
|
}
|
|
|
|
static const struct dm_serial_ops pl01x_serial_ops = {
|
|
.putc = pl01x_serial_putc,
|
|
.pending = pl01x_serial_pending,
|
|
.getc = pl01x_serial_getc,
|
|
.setbrg = pl01x_serial_setbrg,
|
|
};
|
|
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL)
|
|
static const struct udevice_id pl01x_serial_id[] ={
|
|
{.compatible = "arm,pl011", .data = TYPE_PL011},
|
|
{.compatible = "arm,pl010", .data = TYPE_PL010},
|
|
{}
|
|
};
|
|
|
|
#ifndef CFG_PL011_CLOCK
|
|
#define CFG_PL011_CLOCK 0
|
|
#endif
|
|
|
|
int pl01x_serial_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct pl01x_serial_plat *plat = dev_get_plat(dev);
|
|
struct clk clk;
|
|
fdt_addr_t addr;
|
|
int ret;
|
|
|
|
addr = dev_read_addr(dev);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
plat->base = addr;
|
|
plat->clock = dev_read_u32_default(dev, "clock", CFG_PL011_CLOCK);
|
|
ret = clk_get_by_index(dev, 0, &clk);
|
|
if (!ret) {
|
|
ret = clk_enable(&clk);
|
|
if (ret && ret != -ENOSYS) {
|
|
dev_err(dev, "failed to enable clock\n");
|
|
return ret;
|
|
}
|
|
|
|
plat->clock = clk_get_rate(&clk);
|
|
if (IS_ERR_VALUE(plat->clock)) {
|
|
dev_err(dev, "failed to get rate\n");
|
|
return plat->clock;
|
|
}
|
|
debug("%s: CLK %d\n", __func__, plat->clock);
|
|
}
|
|
plat->type = dev_get_driver_data(dev);
|
|
plat->skip_init = dev_read_bool(dev, "skip-init");
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
U_BOOT_DRIVER(serial_pl01x) = {
|
|
.name = "serial_pl01x",
|
|
.id = UCLASS_SERIAL,
|
|
.of_match = of_match_ptr(pl01x_serial_id),
|
|
.of_to_plat = of_match_ptr(pl01x_serial_of_to_plat),
|
|
.plat_auto = sizeof(struct pl01x_serial_plat),
|
|
.probe = pl01x_serial_probe,
|
|
.ops = &pl01x_serial_ops,
|
|
.flags = DM_FLAG_PRE_RELOC,
|
|
.priv_auto = sizeof(struct pl01x_priv),
|
|
};
|
|
|
|
#endif
|
|
|
|
#if defined(CONFIG_DEBUG_UART_PL010) || defined(CONFIG_DEBUG_UART_PL011)
|
|
|
|
#include <debug_uart.h>
|
|
|
|
static void _debug_uart_init(void)
|
|
{
|
|
#ifndef CONFIG_DEBUG_UART_SKIP_INIT
|
|
struct pl01x_regs *regs = (struct pl01x_regs *)CONFIG_VAL(DEBUG_UART_BASE);
|
|
enum pl01x_type type;
|
|
|
|
if (IS_ENABLED(CONFIG_DEBUG_UART_PL011))
|
|
type = TYPE_PL011;
|
|
else
|
|
type = TYPE_PL010;
|
|
|
|
pl01x_generic_serial_init(regs, type);
|
|
pl01x_generic_setbrg(regs, type,
|
|
CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE);
|
|
#endif
|
|
}
|
|
|
|
static inline void _debug_uart_putc(int ch)
|
|
{
|
|
struct pl01x_regs *regs = (struct pl01x_regs *)CONFIG_VAL(DEBUG_UART_BASE);
|
|
|
|
while (pl01x_putc(regs, ch) == -EAGAIN)
|
|
;
|
|
}
|
|
|
|
DEBUG_UART_FUNCS
|
|
|
|
#endif
|