mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
fbfa15c0b8
Replace custom driver macros by PCIE_ECAM_OFFSET() macro from pci.h Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
636 lines
18 KiB
C
636 lines
18 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Broadcom STB PCIe controller driver
|
|
*
|
|
* Copyright (C) 2020 Samsung Electronics Co., Ltd.
|
|
*
|
|
* Based on upstream Linux kernel driver:
|
|
* drivers/pci/controller/pcie-brcmstb.c
|
|
* Copyright (C) 2009 - 2017 Broadcom
|
|
*
|
|
* Based driver by Nicolas Saenz Julienne
|
|
* Copyright (C) 2020 Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <dm.h>
|
|
#include <dm/ofnode.h>
|
|
#include <pci.h>
|
|
#include <asm/io.h>
|
|
#include <linux/bitfield.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/iopoll.h>
|
|
|
|
/* Offset of the mandatory PCIe capability config registers */
|
|
#define BRCM_PCIE_CAP_REGS 0x00ac
|
|
|
|
/* The PCIe controller register offsets */
|
|
#define PCIE_RC_CFG_VENDOR_SPECIFIC_REG1 0x0188
|
|
#define VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK 0xc
|
|
#define VENDOR_SPECIFIC_REG1_LITTLE_ENDIAN 0x0
|
|
|
|
#define PCIE_RC_CFG_PRIV1_ID_VAL3 0x043c
|
|
#define CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK 0xffffff
|
|
|
|
#define PCIE_RC_DL_MDIO_ADDR 0x1100
|
|
#define PCIE_RC_DL_MDIO_WR_DATA 0x1104
|
|
#define PCIE_RC_DL_MDIO_RD_DATA 0x1108
|
|
|
|
#define PCIE_MISC_MISC_CTRL 0x4008
|
|
#define MISC_CTRL_SCB_ACCESS_EN_MASK 0x1000
|
|
#define MISC_CTRL_CFG_READ_UR_MODE_MASK 0x2000
|
|
#define MISC_CTRL_MAX_BURST_SIZE_MASK 0x300000
|
|
#define MISC_CTRL_MAX_BURST_SIZE_128 0x0
|
|
#define MISC_CTRL_SCB0_SIZE_MASK 0xf8000000
|
|
|
|
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO 0x400c
|
|
#define PCIE_MEM_WIN0_LO(win) \
|
|
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO + ((win) * 4)
|
|
|
|
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI 0x4010
|
|
#define PCIE_MEM_WIN0_HI(win) \
|
|
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI + ((win) * 4)
|
|
|
|
#define PCIE_MISC_RC_BAR1_CONFIG_LO 0x402c
|
|
#define RC_BAR1_CONFIG_LO_SIZE_MASK 0x1f
|
|
|
|
#define PCIE_MISC_RC_BAR2_CONFIG_LO 0x4034
|
|
#define RC_BAR2_CONFIG_LO_SIZE_MASK 0x1f
|
|
#define PCIE_MISC_RC_BAR2_CONFIG_HI 0x4038
|
|
|
|
#define PCIE_MISC_RC_BAR3_CONFIG_LO 0x403c
|
|
#define RC_BAR3_CONFIG_LO_SIZE_MASK 0x1f
|
|
|
|
#define PCIE_MISC_PCIE_STATUS 0x4068
|
|
#define STATUS_PCIE_PORT_MASK 0x80
|
|
#define STATUS_PCIE_PORT_SHIFT 7
|
|
#define STATUS_PCIE_DL_ACTIVE_MASK 0x20
|
|
#define STATUS_PCIE_DL_ACTIVE_SHIFT 5
|
|
#define STATUS_PCIE_PHYLINKUP_MASK 0x10
|
|
#define STATUS_PCIE_PHYLINKUP_SHIFT 4
|
|
|
|
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT 0x4070
|
|
#define MEM_WIN0_BASE_LIMIT_LIMIT_MASK 0xfff00000
|
|
#define MEM_WIN0_BASE_LIMIT_BASE_MASK 0xfff0
|
|
#define MEM_WIN0_BASE_LIMIT_BASE_HI_SHIFT 12
|
|
#define PCIE_MEM_WIN0_BASE_LIMIT(win) \
|
|
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT + ((win) * 4)
|
|
|
|
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI 0x4080
|
|
#define MEM_WIN0_BASE_HI_BASE_MASK 0xff
|
|
#define PCIE_MEM_WIN0_BASE_HI(win) \
|
|
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI + ((win) * 8)
|
|
|
|
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI 0x4084
|
|
#define PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK 0xff
|
|
#define PCIE_MEM_WIN0_LIMIT_HI(win) \
|
|
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI + ((win) * 8)
|
|
|
|
#define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204
|
|
#define PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK 0x2
|
|
#define PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x08000000
|
|
|
|
#define PCIE_MSI_INTR2_CLR 0x4508
|
|
#define PCIE_MSI_INTR2_MASK_SET 0x4510
|
|
|
|
#define PCIE_EXT_CFG_DATA 0x8000
|
|
|
|
#define PCIE_EXT_CFG_INDEX 0x9000
|
|
|
|
#define PCIE_RGR1_SW_INIT_1 0x9210
|
|
#define RGR1_SW_INIT_1_PERST_MASK 0x1
|
|
#define RGR1_SW_INIT_1_INIT_MASK 0x2
|
|
|
|
/* PCIe parameters */
|
|
#define BRCM_NUM_PCIE_OUT_WINS 4
|
|
|
|
/* MDIO registers */
|
|
#define MDIO_PORT0 0x0
|
|
#define MDIO_DATA_MASK 0x7fffffff
|
|
#define MDIO_DATA_SHIFT 0
|
|
#define MDIO_PORT_MASK 0xf0000
|
|
#define MDIO_PORT_SHIFT 16
|
|
#define MDIO_REGAD_MASK 0xffff
|
|
#define MDIO_REGAD_SHIFT 0
|
|
#define MDIO_CMD_MASK 0xfff00000
|
|
#define MDIO_CMD_SHIFT 20
|
|
#define MDIO_CMD_READ 0x1
|
|
#define MDIO_CMD_WRITE 0x0
|
|
#define MDIO_DATA_DONE_MASK 0x80000000
|
|
#define SSC_REGS_ADDR 0x1100
|
|
#define SET_ADDR_OFFSET 0x1f
|
|
#define SSC_CNTL_OFFSET 0x2
|
|
#define SSC_CNTL_OVRD_EN_MASK 0x8000
|
|
#define SSC_CNTL_OVRD_VAL_MASK 0x4000
|
|
#define SSC_STATUS_OFFSET 0x1
|
|
#define SSC_STATUS_SSC_MASK 0x400
|
|
#define SSC_STATUS_SSC_SHIFT 10
|
|
#define SSC_STATUS_PLL_LOCK_MASK 0x800
|
|
#define SSC_STATUS_PLL_LOCK_SHIFT 11
|
|
|
|
/**
|
|
* struct brcm_pcie - the PCIe controller state
|
|
* @base: Base address of memory mapped IO registers of the controller
|
|
* @gen: Non-zero value indicates limitation of the PCIe controller operation
|
|
* to a specific generation (1, 2 or 3)
|
|
* @ssc: true indicates active Spread Spectrum Clocking operation
|
|
*/
|
|
struct brcm_pcie {
|
|
void __iomem *base;
|
|
|
|
int gen;
|
|
bool ssc;
|
|
};
|
|
|
|
/**
|
|
* brcm_pcie_encode_ibar_size() - Encode the inbound "BAR" region size
|
|
* @size: The inbound region size
|
|
*
|
|
* This function converts size of the inbound "BAR" region to the non-linear
|
|
* values of the PCIE_MISC_RC_BAR[123]_CONFIG_LO register SIZE field.
|
|
*
|
|
* Return: The encoded inbound region size
|
|
*/
|
|
static int brcm_pcie_encode_ibar_size(u64 size)
|
|
{
|
|
int log2_in = ilog2(size);
|
|
|
|
if (log2_in >= 12 && log2_in <= 15)
|
|
/* Covers 4KB to 32KB (inclusive) */
|
|
return (log2_in - 12) + 0x1c;
|
|
else if (log2_in >= 16 && log2_in <= 37)
|
|
/* Covers 64KB to 32GB, (inclusive) */
|
|
return log2_in - 15;
|
|
|
|
/* Something is awry so disable */
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* brcm_pcie_rc_mode() - Check if PCIe controller is in RC mode
|
|
* @pcie: Pointer to the PCIe controller state
|
|
*
|
|
* The controller is capable of serving in both RC and EP roles.
|
|
*
|
|
* Return: true for RC mode, false for EP mode.
|
|
*/
|
|
static bool brcm_pcie_rc_mode(struct brcm_pcie *pcie)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(pcie->base + PCIE_MISC_PCIE_STATUS);
|
|
|
|
return (val & STATUS_PCIE_PORT_MASK) >> STATUS_PCIE_PORT_SHIFT;
|
|
}
|
|
|
|
/**
|
|
* brcm_pcie_link_up() - Check whether the PCIe link is up
|
|
* @pcie: Pointer to the PCIe controller state
|
|
*
|
|
* Return: true if the link is up, false otherwise.
|
|
*/
|
|
static bool brcm_pcie_link_up(struct brcm_pcie *pcie)
|
|
{
|
|
u32 val, dla, plu;
|
|
|
|
val = readl(pcie->base + PCIE_MISC_PCIE_STATUS);
|
|
dla = (val & STATUS_PCIE_DL_ACTIVE_MASK) >> STATUS_PCIE_DL_ACTIVE_SHIFT;
|
|
plu = (val & STATUS_PCIE_PHYLINKUP_MASK) >> STATUS_PCIE_PHYLINKUP_SHIFT;
|
|
|
|
return dla && plu;
|
|
}
|
|
|
|
static int brcm_pcie_config_address(const struct udevice *dev, pci_dev_t bdf,
|
|
uint offset, void **paddress)
|
|
{
|
|
struct brcm_pcie *pcie = dev_get_priv(dev);
|
|
unsigned int pci_bus = PCI_BUS(bdf);
|
|
unsigned int pci_dev = PCI_DEV(bdf);
|
|
unsigned int pci_func = PCI_FUNC(bdf);
|
|
int idx;
|
|
|
|
/*
|
|
* Busses 0 (host PCIe bridge) and 1 (its immediate child)
|
|
* are limited to a single device each
|
|
*/
|
|
if (pci_bus < 2 && pci_dev > 0)
|
|
return -EINVAL;
|
|
|
|
/* Accesses to the RC go right to the RC registers */
|
|
if (pci_bus == 0) {
|
|
*paddress = pcie->base + offset;
|
|
return 0;
|
|
}
|
|
|
|
/* For devices, write to the config space index register */
|
|
idx = PCIE_ECAM_OFFSET(pci_bus, pci_dev, pci_func, 0);
|
|
|
|
writel(idx, pcie->base + PCIE_EXT_CFG_INDEX);
|
|
*paddress = pcie->base + PCIE_EXT_CFG_DATA + offset;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int brcm_pcie_read_config(const struct udevice *bus, pci_dev_t bdf,
|
|
uint offset, ulong *valuep,
|
|
enum pci_size_t size)
|
|
{
|
|
return pci_generic_mmap_read_config(bus, brcm_pcie_config_address,
|
|
bdf, offset, valuep, size);
|
|
}
|
|
|
|
static int brcm_pcie_write_config(struct udevice *bus, pci_dev_t bdf,
|
|
uint offset, ulong value,
|
|
enum pci_size_t size)
|
|
{
|
|
return pci_generic_mmap_write_config(bus, brcm_pcie_config_address,
|
|
bdf, offset, value, size);
|
|
}
|
|
|
|
static const char *link_speed_to_str(unsigned int cls)
|
|
{
|
|
switch (cls) {
|
|
case PCI_EXP_LNKSTA_CLS_2_5GB: return "2.5";
|
|
case PCI_EXP_LNKSTA_CLS_5_0GB: return "5.0";
|
|
case PCI_EXP_LNKSTA_CLS_8_0GB: return "8.0";
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return "??";
|
|
}
|
|
|
|
static u32 brcm_pcie_mdio_form_pkt(unsigned int port, unsigned int regad,
|
|
unsigned int cmd)
|
|
{
|
|
u32 pkt;
|
|
|
|
pkt = (port << MDIO_PORT_SHIFT) & MDIO_PORT_MASK;
|
|
pkt |= (regad << MDIO_REGAD_SHIFT) & MDIO_REGAD_MASK;
|
|
pkt |= (cmd << MDIO_CMD_SHIFT) & MDIO_CMD_MASK;
|
|
|
|
return pkt;
|
|
}
|
|
|
|
/**
|
|
* brcm_pcie_mdio_read() - Perform a register read on the internal MDIO bus
|
|
* @base: Pointer to the PCIe controller IO registers
|
|
* @port: The MDIO port number
|
|
* @regad: The register address
|
|
* @val: A pointer at which to store the read value
|
|
*
|
|
* Return: 0 on success and register value in @val, negative error value
|
|
* on failure.
|
|
*/
|
|
static int brcm_pcie_mdio_read(void __iomem *base, unsigned int port,
|
|
unsigned int regad, u32 *val)
|
|
{
|
|
u32 data, addr;
|
|
int ret;
|
|
|
|
addr = brcm_pcie_mdio_form_pkt(port, regad, MDIO_CMD_READ);
|
|
writel(addr, base + PCIE_RC_DL_MDIO_ADDR);
|
|
readl(base + PCIE_RC_DL_MDIO_ADDR);
|
|
|
|
ret = readl_poll_timeout(base + PCIE_RC_DL_MDIO_RD_DATA, data,
|
|
(data & MDIO_DATA_DONE_MASK), 100);
|
|
|
|
*val = data & MDIO_DATA_MASK;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* brcm_pcie_mdio_write() - Perform a register write on the internal MDIO bus
|
|
* @base: Pointer to the PCIe controller IO registers
|
|
* @port: The MDIO port number
|
|
* @regad: Address of the register
|
|
* @wrdata: The value to write
|
|
*
|
|
* Return: 0 on success, negative error value on failure.
|
|
*/
|
|
static int brcm_pcie_mdio_write(void __iomem *base, unsigned int port,
|
|
unsigned int regad, u16 wrdata)
|
|
{
|
|
u32 data, addr;
|
|
|
|
addr = brcm_pcie_mdio_form_pkt(port, regad, MDIO_CMD_WRITE);
|
|
writel(addr, base + PCIE_RC_DL_MDIO_ADDR);
|
|
readl(base + PCIE_RC_DL_MDIO_ADDR);
|
|
writel(MDIO_DATA_DONE_MASK | wrdata, base + PCIE_RC_DL_MDIO_WR_DATA);
|
|
|
|
return readl_poll_timeout(base + PCIE_RC_DL_MDIO_WR_DATA, data,
|
|
!(data & MDIO_DATA_DONE_MASK), 100);
|
|
}
|
|
|
|
/**
|
|
* brcm_pcie_set_ssc() - Configure the controller for Spread Spectrum Clocking
|
|
* @base: pointer to the PCIe controller IO registers
|
|
*
|
|
* Return: 0 on success, negative error value on failure.
|
|
*/
|
|
static int brcm_pcie_set_ssc(void __iomem *base)
|
|
{
|
|
int pll, ssc;
|
|
int ret;
|
|
u32 tmp;
|
|
|
|
ret = brcm_pcie_mdio_write(base, MDIO_PORT0, SET_ADDR_OFFSET,
|
|
SSC_REGS_ADDR);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = brcm_pcie_mdio_read(base, MDIO_PORT0, SSC_CNTL_OFFSET, &tmp);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
tmp |= (SSC_CNTL_OVRD_EN_MASK | SSC_CNTL_OVRD_VAL_MASK);
|
|
|
|
ret = brcm_pcie_mdio_write(base, MDIO_PORT0, SSC_CNTL_OFFSET, tmp);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
udelay(1000);
|
|
ret = brcm_pcie_mdio_read(base, MDIO_PORT0, SSC_STATUS_OFFSET, &tmp);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ssc = (tmp & SSC_STATUS_SSC_MASK) >> SSC_STATUS_SSC_SHIFT;
|
|
pll = (tmp & SSC_STATUS_PLL_LOCK_MASK) >> SSC_STATUS_PLL_LOCK_SHIFT;
|
|
|
|
return ssc && pll ? 0 : -EIO;
|
|
}
|
|
|
|
/**
|
|
* brcm_pcie_set_gen() - Limits operation to a specific generation (1, 2 or 3)
|
|
* @pcie: pointer to the PCIe controller state
|
|
* @gen: PCIe generation to limit the controller's operation to
|
|
*/
|
|
static void brcm_pcie_set_gen(struct brcm_pcie *pcie, unsigned int gen)
|
|
{
|
|
void __iomem *cap_base = pcie->base + BRCM_PCIE_CAP_REGS;
|
|
|
|
u16 lnkctl2 = readw(cap_base + PCI_EXP_LNKCTL2);
|
|
u32 lnkcap = readl(cap_base + PCI_EXP_LNKCAP);
|
|
|
|
lnkcap = (lnkcap & ~PCI_EXP_LNKCAP_SLS) | gen;
|
|
writel(lnkcap, cap_base + PCI_EXP_LNKCAP);
|
|
|
|
lnkctl2 = (lnkctl2 & ~0xf) | gen;
|
|
writew(lnkctl2, cap_base + PCI_EXP_LNKCTL2);
|
|
}
|
|
|
|
static void brcm_pcie_set_outbound_win(struct brcm_pcie *pcie,
|
|
unsigned int win, u64 phys_addr,
|
|
u64 pcie_addr, u64 size)
|
|
{
|
|
void __iomem *base = pcie->base;
|
|
u32 phys_addr_mb_high, limit_addr_mb_high;
|
|
phys_addr_t phys_addr_mb, limit_addr_mb;
|
|
int high_addr_shift;
|
|
u32 tmp;
|
|
|
|
/* Set the base of the pcie_addr window */
|
|
writel(lower_32_bits(pcie_addr), base + PCIE_MEM_WIN0_LO(win));
|
|
writel(upper_32_bits(pcie_addr), base + PCIE_MEM_WIN0_HI(win));
|
|
|
|
/* Write the addr base & limit lower bits (in MBs) */
|
|
phys_addr_mb = phys_addr / SZ_1M;
|
|
limit_addr_mb = (phys_addr + size - 1) / SZ_1M;
|
|
|
|
tmp = readl(base + PCIE_MEM_WIN0_BASE_LIMIT(win));
|
|
u32p_replace_bits(&tmp, phys_addr_mb,
|
|
MEM_WIN0_BASE_LIMIT_BASE_MASK);
|
|
u32p_replace_bits(&tmp, limit_addr_mb,
|
|
MEM_WIN0_BASE_LIMIT_LIMIT_MASK);
|
|
writel(tmp, base + PCIE_MEM_WIN0_BASE_LIMIT(win));
|
|
|
|
/* Write the cpu & limit addr upper bits */
|
|
high_addr_shift = MEM_WIN0_BASE_LIMIT_BASE_HI_SHIFT;
|
|
phys_addr_mb_high = phys_addr_mb >> high_addr_shift;
|
|
tmp = readl(base + PCIE_MEM_WIN0_BASE_HI(win));
|
|
u32p_replace_bits(&tmp, phys_addr_mb_high,
|
|
MEM_WIN0_BASE_HI_BASE_MASK);
|
|
writel(tmp, base + PCIE_MEM_WIN0_BASE_HI(win));
|
|
|
|
limit_addr_mb_high = limit_addr_mb >> high_addr_shift;
|
|
tmp = readl(base + PCIE_MEM_WIN0_LIMIT_HI(win));
|
|
u32p_replace_bits(&tmp, limit_addr_mb_high,
|
|
PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK);
|
|
writel(tmp, base + PCIE_MEM_WIN0_LIMIT_HI(win));
|
|
}
|
|
|
|
static int brcm_pcie_probe(struct udevice *dev)
|
|
{
|
|
struct udevice *ctlr = pci_get_controller(dev);
|
|
struct pci_controller *hose = dev_get_uclass_priv(ctlr);
|
|
struct brcm_pcie *pcie = dev_get_priv(dev);
|
|
void __iomem *base = pcie->base;
|
|
struct pci_region region;
|
|
bool ssc_good = false;
|
|
int num_out_wins = 0;
|
|
u64 rc_bar2_offset, rc_bar2_size;
|
|
unsigned int scb_size_val;
|
|
int i, ret;
|
|
u16 nlw, cls, lnksta;
|
|
u32 tmp;
|
|
|
|
/*
|
|
* Reset the bridge, assert the fundamental reset. Note for some SoCs,
|
|
* e.g. BCM7278, the fundamental reset should not be asserted here.
|
|
* This will need to be changed when support for other SoCs is added.
|
|
*/
|
|
setbits_le32(base + PCIE_RGR1_SW_INIT_1,
|
|
RGR1_SW_INIT_1_INIT_MASK | RGR1_SW_INIT_1_PERST_MASK);
|
|
/*
|
|
* The delay is a safety precaution to preclude the reset signal
|
|
* from looking like a glitch.
|
|
*/
|
|
udelay(100);
|
|
|
|
/* Take the bridge out of reset */
|
|
clrbits_le32(base + PCIE_RGR1_SW_INIT_1, RGR1_SW_INIT_1_INIT_MASK);
|
|
|
|
clrbits_le32(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG,
|
|
PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
|
|
|
|
/* Wait for SerDes to be stable */
|
|
udelay(100);
|
|
|
|
/* Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN */
|
|
clrsetbits_le32(base + PCIE_MISC_MISC_CTRL,
|
|
MISC_CTRL_MAX_BURST_SIZE_MASK,
|
|
MISC_CTRL_SCB_ACCESS_EN_MASK |
|
|
MISC_CTRL_CFG_READ_UR_MODE_MASK |
|
|
MISC_CTRL_MAX_BURST_SIZE_128);
|
|
|
|
pci_get_dma_regions(dev, ®ion, 0);
|
|
rc_bar2_offset = region.bus_start - region.phys_start;
|
|
rc_bar2_size = 1ULL << fls64(region.size - 1);
|
|
|
|
tmp = lower_32_bits(rc_bar2_offset);
|
|
u32p_replace_bits(&tmp, brcm_pcie_encode_ibar_size(rc_bar2_size),
|
|
RC_BAR2_CONFIG_LO_SIZE_MASK);
|
|
writel(tmp, base + PCIE_MISC_RC_BAR2_CONFIG_LO);
|
|
writel(upper_32_bits(rc_bar2_offset),
|
|
base + PCIE_MISC_RC_BAR2_CONFIG_HI);
|
|
|
|
scb_size_val = rc_bar2_size ?
|
|
ilog2(rc_bar2_size) - 15 : 0xf; /* 0xf is 1GB */
|
|
|
|
tmp = readl(base + PCIE_MISC_MISC_CTRL);
|
|
u32p_replace_bits(&tmp, scb_size_val,
|
|
MISC_CTRL_SCB0_SIZE_MASK);
|
|
writel(tmp, base + PCIE_MISC_MISC_CTRL);
|
|
|
|
/* Disable the PCIe->GISB memory window (RC_BAR1) */
|
|
clrbits_le32(base + PCIE_MISC_RC_BAR1_CONFIG_LO,
|
|
RC_BAR1_CONFIG_LO_SIZE_MASK);
|
|
|
|
/* Disable the PCIe->SCB memory window (RC_BAR3) */
|
|
clrbits_le32(base + PCIE_MISC_RC_BAR3_CONFIG_LO,
|
|
RC_BAR3_CONFIG_LO_SIZE_MASK);
|
|
|
|
/* Mask all interrupts since we are not handling any yet */
|
|
writel(0xffffffff, base + PCIE_MSI_INTR2_MASK_SET);
|
|
|
|
/* Clear any interrupts we find on boot */
|
|
writel(0xffffffff, base + PCIE_MSI_INTR2_CLR);
|
|
|
|
if (pcie->gen)
|
|
brcm_pcie_set_gen(pcie, pcie->gen);
|
|
|
|
/* Unassert the fundamental reset */
|
|
clrbits_le32(pcie->base + PCIE_RGR1_SW_INIT_1,
|
|
RGR1_SW_INIT_1_PERST_MASK);
|
|
|
|
/* Give the RC/EP time to wake up, before trying to configure RC.
|
|
* Intermittently check status for link-up, up to a total of 100ms.
|
|
*/
|
|
for (i = 0; i < 100 && !brcm_pcie_link_up(pcie); i += 5)
|
|
mdelay(5);
|
|
|
|
if (!brcm_pcie_link_up(pcie)) {
|
|
printf("PCIe BRCM: link down\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!brcm_pcie_rc_mode(pcie)) {
|
|
printf("PCIe misconfigured; is in EP mode\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < hose->region_count; i++) {
|
|
struct pci_region *reg = &hose->regions[i];
|
|
|
|
if (reg->flags != PCI_REGION_MEM)
|
|
continue;
|
|
|
|
if (num_out_wins >= BRCM_NUM_PCIE_OUT_WINS)
|
|
return -EINVAL;
|
|
|
|
brcm_pcie_set_outbound_win(pcie, num_out_wins, reg->phys_start,
|
|
reg->bus_start, reg->size);
|
|
|
|
num_out_wins++;
|
|
}
|
|
|
|
/*
|
|
* For config space accesses on the RC, show the right class for
|
|
* a PCIe-PCIe bridge (the default setting is to be EP mode).
|
|
*/
|
|
clrsetbits_le32(base + PCIE_RC_CFG_PRIV1_ID_VAL3,
|
|
CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK, 0x060400);
|
|
|
|
if (pcie->ssc) {
|
|
ret = brcm_pcie_set_ssc(pcie->base);
|
|
if (!ret)
|
|
ssc_good = true;
|
|
else
|
|
printf("PCIe BRCM: failed attempt to enter SSC mode\n");
|
|
}
|
|
|
|
lnksta = readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKSTA);
|
|
cls = lnksta & PCI_EXP_LNKSTA_CLS;
|
|
nlw = (lnksta & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT;
|
|
|
|
printf("PCIe BRCM: link up, %s Gbps x%u %s\n", link_speed_to_str(cls),
|
|
nlw, ssc_good ? "(SSC)" : "(!SSC)");
|
|
|
|
/* PCIe->SCB endian mode for BAR */
|
|
clrsetbits_le32(base + PCIE_RC_CFG_VENDOR_SPECIFIC_REG1,
|
|
VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK,
|
|
VENDOR_SPECIFIC_REG1_LITTLE_ENDIAN);
|
|
/*
|
|
* Refclk from RC should be gated with CLKREQ# input when ASPM L0s,L1
|
|
* is enabled => setting the CLKREQ_DEBUG_ENABLE field to 1.
|
|
*/
|
|
setbits_le32(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG,
|
|
PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int brcm_pcie_remove(struct udevice *dev)
|
|
{
|
|
struct brcm_pcie *pcie = dev_get_priv(dev);
|
|
void __iomem *base = pcie->base;
|
|
|
|
/* Assert fundamental reset */
|
|
setbits_le32(base + PCIE_RGR1_SW_INIT_1, RGR1_SW_INIT_1_PERST_MASK);
|
|
|
|
/* Turn off SerDes */
|
|
setbits_le32(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG,
|
|
PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
|
|
|
|
/* Shutdown bridge */
|
|
setbits_le32(base + PCIE_RGR1_SW_INIT_1, RGR1_SW_INIT_1_INIT_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int brcm_pcie_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct brcm_pcie *pcie = dev_get_priv(dev);
|
|
ofnode dn = dev_ofnode(dev);
|
|
u32 max_link_speed;
|
|
int ret;
|
|
|
|
/* Get the controller base address */
|
|
pcie->base = dev_read_addr_ptr(dev);
|
|
if (!pcie->base)
|
|
return -EINVAL;
|
|
|
|
pcie->ssc = ofnode_read_bool(dn, "brcm,enable-ssc");
|
|
|
|
ret = ofnode_read_u32(dn, "max-link-speed", &max_link_speed);
|
|
if (ret < 0 || max_link_speed > 4)
|
|
pcie->gen = 0;
|
|
else
|
|
pcie->gen = max_link_speed;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_pci_ops brcm_pcie_ops = {
|
|
.read_config = brcm_pcie_read_config,
|
|
.write_config = brcm_pcie_write_config,
|
|
};
|
|
|
|
static const struct udevice_id brcm_pcie_ids[] = {
|
|
{ .compatible = "brcm,bcm2711-pcie" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(pcie_brcm_base) = {
|
|
.name = "pcie_brcm",
|
|
.id = UCLASS_PCI,
|
|
.ops = &brcm_pcie_ops,
|
|
.of_match = brcm_pcie_ids,
|
|
.probe = brcm_pcie_probe,
|
|
.remove = brcm_pcie_remove,
|
|
.of_to_plat = brcm_pcie_of_to_plat,
|
|
.priv_auto = sizeof(struct brcm_pcie),
|
|
.flags = DM_FLAG_OS_PREPARE,
|
|
};
|