u-boot/arch/arm/dts/ls1021a-pg-wcom-seli8.dts
Aleksandar Gerasimovski 91ee54741e board/km: add support for seli8 design based on nxp ls102x
The SELI8 design is a new tdm service unit card for Hitachi-Powergrids
XMC and FOX product lines.

It is based on NXP LS1021 SoC and it provides following interfaces:
 - IFC interface for NOR, NAND and external FPGA's
 - 1 x RGMII ETH for debug purposes
 - 2 x SGMII ETH for management communication via back-plane
 - 1 x uQE HDLC for management communication via back-plane
 - 1 x I2C for peripheral devices
 - 1 x SPI for peripheral devices
 - 1 x UART for debug logging

It is foreseen that the design will be later re-used for another XMC and
FOX service cards with similar SoC requirements.

Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com>
Signed-off-by: Matteo Ghidoni <matteo.ghidoni@hitachi-powergrids.com>
Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-04-15 14:22:17 +05:30

111 lines
1.7 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2013-2015 Freescale Semiconductor, Inc.
* Copyright 2020 Hitachi Power Grids. All rights reserved.
*/
/dts-v1/;
#include "ls1021a.dtsi"
/ {
model = "Hitachi-Powergrids SELI8 Service Unit for XMC and FOX";
chosen {
stdout-path = &uart0;
};
};
&enet0 {
status = "okay";
tbi-handle = <&tbi0>;
phy-connection-type = "sgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&enet1 {
status = "okay";
tbi-handle = <&tbi1>;
phy-connection-type = "sgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&enet2 {
phy-handle = <&debug_phy>;
phy-connection-type = "rgmii-id";
status = "okay";
};
&i2c0 {
status = "okay";
};
&ifc {
#address-cells = <2>;
#size-cells = <1>;
/* NOR Flash on board */
ranges = <0x0 0x0 0x60000000 0x04000000>;
status = "okay";
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x4000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
label = "rcw";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
label = "qe";
reg = <0x20000 0x20000>;
};
partition@40000 {
label = "envred";
reg = <0x40000 0x20000>;
};
partition@60000 {
label = "env";
reg = <0x60000 0x20000>;
};
partition@100000 {
label = "u-boot";
reg = <0x100000 0x100000>;
};
partition@200000 {
label = "ubi0";
reg = <0x200000 0x3E00000>;
};
};
};
&mdio0 {
debug_phy: ethernet-phy@11 {
reg = <0x11>;
};
tbi0: tbi-phy@0xb {
reg = <0xb>;
device_type = "tbi-phy";
};
};
&mdio1 {
tbi1: tbi-phy@0xd {
reg = <0xd>;
device_type = "tbi-phy";
};
};
&uart0 {
status = "okay";
};