u-boot/board/freescale/common
tang yuantian 0210a36988 arm: ls1021atwr: optimize the deep sleep latency
It will take more than 1s when wake up from deep sleep. Most of the
time is spent on outputing information. This patch reduced the deep
sleep latency by:
1. avoid outputing system informaton
2. remove flush cache after DDR restore
3. skip reloading second stage uboot binary when SD boot

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-10-30 09:19:48 -07:00
..
p_corenet powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041 2015-07-31 08:50:18 -07:00
arm_sleep.c arm: ls1021atwr: optimize the deep sleep latency 2015-10-30 09:19:48 -07:00
cadmus.c Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
cadmus.h Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
cds_pci_ft.c fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
cds_via.c Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
cmd_esbc_validate.c Add bootscript support to esbc_validate. 2015-04-21 10:19:19 -07:00
dcu_sii9022a.c video: dcu: Add Sii9022A HDMI Transmitter support 2014-09-08 10:30:35 -07:00
dcu_sii9022a.h video: dcu: Add Sii9022A HDMI Transmitter support 2014-09-08 10:30:35 -07:00
diu_ch7301.c fsl/diu: ch7301 encoder split off from t1040qds/diu.c 2014-08-12 12:26:46 -07:00
diu_ch7301.h fsl/diu: ch7301 encoder split off from t1040qds/diu.c 2014-08-12 12:26:46 -07:00
eeprom.h Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
fman.c armv8/ls1043a: Add Fman support 2015-10-29 10:34:01 -07:00
fman.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
fsl_validate.c SECURE_BOOT: Correct reading of ITS bit 2015-10-30 09:19:47 -07:00
ics307_clk.c cosmetic: replace MIN, MAX with min, max 2014-09-24 18:30:29 -04:00
ics307_clk.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
idt8t49n222a_serdes_clk.c powerpc/mpc85xx: Cleanup license header in source files 2013-08-12 15:04:24 -07:00
idt8t49n222a_serdes_clk.h powerpc/mpc85xx: Cleanup license header in source files 2013-08-12 15:04:24 -07:00
ls102xa_stream_id.c arm: ls1021x: Add support for initializing CAAM's stream id 2015-02-24 13:11:05 -08:00
Makefile armv7/ls1021a: move ns_access to common file 2015-10-29 10:33:58 -07:00
mpc85xx_sleep.c fsl/deepsleep: avoid the DDR restore from being optimized out 2015-05-04 09:25:06 -07:00
ngpixis.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
ngpixis.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
ns_access.c armv7/ls1021a: move ns_access to common file 2015-10-29 10:33:58 -07:00
pfuze.c fsl: common: pfuze: no use original pfuze code if DM_PMIC 2015-08-12 11:05:11 +02:00
pfuze.h pmic:pfuze implement pmic_mode_init 2015-02-11 12:27:46 +01:00
pixis.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
pixis.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
pq-mds-pib.c powerpc: mpc83xx: remove MPC8360ERDK, EMPC8360EMDS support 2015-01-23 16:53:00 -05:00
pq-mds-pib.h mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support 2007-08-16 23:12:11 -05:00
qixis.c freescale/qixis: Add support for booting from NAND 2015-04-23 16:46:51 -07:00
qixis.h mmc: fsl_esdhc: Add adapter card type identification support 2015-05-04 09:25:19 -07:00
sdhc_boot.c eSDHC: Calculate envaddr accroding to the address format 2014-01-22 08:56:44 -08:00
sgmii_riser.c powerpc/sgmii: To support PHY link state auto detect in SGMII mode 2012-08-08 18:32:15 -05:00
sgmii_riser.h Fixup SGMII PHY ids in the device tree 2009-02-16 18:05:54 -06:00
sleep.h fsl/sleep: updated the deep sleep framework for QorIQ platforms 2014-12-11 09:41:18 -08:00
sys_eeprom.c board/fsl/common: Fix eeprom system version endianness 2015-07-20 11:44:34 -07:00
via.h Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale. 2007-12-11 22:34:20 -06:00
vid.c powerpc/t208xqds: VID support 2014-12-05 08:06:09 -08:00
vid.h powerpc/t208xqds: VID support 2014-12-05 08:06:09 -08:00
vsc3316_3308.c powerpc/b4860qds: add workaround for XFI 2014-12-05 08:06:13 -08:00
vsc3316_3308.h powerpc/b4860qds: add workaround for XFI 2014-12-05 08:06:13 -08:00
zm7300.c board/freescale/common: ZM7300 driver 2014-05-13 08:20:31 -07:00
zm7300.h board/freescale/common: ZM7300 driver 2014-05-13 08:20:31 -07:00