u-boot/board/gdsys/common/ihs_mdio.c
Dirk Eibach 50dcf89d90 mpc83xx: Add gdsys hrcon board
The gdsys hrcon board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.

On board peripherals include:
- 1x GbE (optional)
- Lattice ECP3 FPGA connected via eLBC and PCIe

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Stefan Roese <sr@denx.de>
2014-11-19 08:48:42 +01:00

88 lines
1.6 KiB
C

/*
* (C) Copyright 2014
* Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <gdsys_fpga.h>
#include <miiphy.h>
#include "ihs_mdio.h"
static int ihs_mdio_idle(struct mii_dev *bus)
{
struct ihs_mdio_info *info = bus->priv;
u16 val;
unsigned int ctr = 0;
do {
FPGA_GET_REG(info->fpga, mdio.control, &val);
udelay(100);
if (ctr++ > 10)
return -1;
} while (!(val & (1 << 12)));
return 0;
}
static int ihs_mdio_reset(struct mii_dev *bus)
{
ihs_mdio_idle(bus);
return 0;
}
static int ihs_mdio_read(struct mii_dev *bus, int addr, int dev_addr,
int regnum)
{
struct ihs_mdio_info *info = bus->priv;
u16 val;
ihs_mdio_idle(bus);
FPGA_SET_REG(info->fpga, mdio.control,
((addr & 0x1f) << 5) | (regnum & 0x1f) | (2 << 10));
/* wait for rx data available */
udelay(100);
FPGA_GET_REG(info->fpga, mdio.rx_data, &val);
return val;
}
static int ihs_mdio_write(struct mii_dev *bus, int addr, int dev_addr,
int regnum, u16 value)
{
struct ihs_mdio_info *info = bus->priv;
ihs_mdio_idle(bus);
FPGA_SET_REG(info->fpga, mdio.address_data, value);
FPGA_SET_REG(info->fpga, mdio.control,
((addr & 0x1f) << 5) | (regnum & 0x1f) | (1 << 10));
return 0;
}
int ihs_mdio_init(struct ihs_mdio_info *info)
{
struct mii_dev *bus = mdio_alloc();
if (!bus) {
printf("Failed to allocate FSL MDIO bus\n");
return -1;
}
bus->read = ihs_mdio_read;
bus->write = ihs_mdio_write;
bus->reset = ihs_mdio_reset;
sprintf(bus->name, info->name);
bus->priv = info;
return mdio_register(bus);
}