u-boot/common/cmd_tsi148.c
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

472 lines
11 KiB
C

/*
* (C) Copyright 2009 Reinhard Arlt, reinhard.arlt@esd-electronics.com
*
* base on universe.h by
*
* (C) Copyright 2003 Stefan Roese, stefan.roese@esd-electronics.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <command.h>
#include <malloc.h>
#include <asm/io.h>
#include <pci.h>
#include <tsi148.h>
#define PCI_VENDOR PCI_VENDOR_ID_TUNDRA
#define PCI_DEVICE PCI_DEVICE_ID_TUNDRA_TSI148
typedef struct _TSI148_DEV TSI148_DEV;
struct _TSI148_DEV {
int bus;
pci_dev_t busdevfn;
TSI148 *uregs;
unsigned int pci_bs;
};
static TSI148_DEV *dev;
/*
* Most of the TSI148 register are BIGENDIAN
* This is the reason for the __raw_writel(htonl(x), x) usage!
*/
int tsi148_init(void)
{
int j, result;
pci_dev_t busdevfn;
unsigned int val;
busdevfn = pci_find_device(PCI_VENDOR, PCI_DEVICE, 0);
if (busdevfn == -1) {
puts("Tsi148: No Tundra Tsi148 found!\n");
return -1;
}
/* Lets turn Latency off */
pci_write_config_dword(busdevfn, 0x0c, 0);
dev = malloc(sizeof(*dev));
if (NULL == dev) {
puts("Tsi148: No memory!\n");
return -1;
}
memset(dev, 0, sizeof(*dev));
dev->busdevfn = busdevfn;
pci_read_config_dword(busdevfn, PCI_BASE_ADDRESS_0, &val);
val &= ~0xf;
dev->uregs = (TSI148 *)val;
debug("Tsi148: Base : %p\n", dev->uregs);
/* check mapping */
debug("Tsi148: Read via mapping, PCI_ID = %08X\n",
readl(&dev->uregs->pci_id));
if (((PCI_DEVICE << 16) | PCI_VENDOR) != readl(&dev->uregs->pci_id)) {
printf("Tsi148: Cannot read PCI-ID via Mapping: %08x\n",
readl(&dev->uregs->pci_id));
result = -1;
goto break_30;
}
debug("Tsi148: PCI_BS = %08X\n", readl(&dev->uregs->pci_mbarl));
dev->pci_bs = readl(&dev->uregs->pci_mbarl);
/* turn off windows */
for (j = 0; j < 8; j++) {
__raw_writel(htonl(0x00000000), &dev->uregs->outbound[j].otat);
__raw_writel(htonl(0x00000000), &dev->uregs->inbound[j].itat);
}
/* Tsi148 VME timeout etc */
__raw_writel(htonl(0x00000084), &dev->uregs->vctrl);
#ifdef DEBUG
if ((__raw_readl(&dev->uregs->vstat) & 0x00000100) != 0)
printf("Tsi148: System Controller!\n");
else
printf("Tsi148: Not System Controller!\n");
#endif
/*
* Lets turn off interrupts
*/
/* Disable interrupts in Tsi148 first */
__raw_writel(htonl(0x00000000), &dev->uregs->inten);
/* Disable interrupt out */
__raw_writel(htonl(0x00000000), &dev->uregs->inteo);
eieio();
/* Reset all IRQ's */
__raw_writel(htonl(0x03ff3f00), &dev->uregs->intc);
/* Map all ints to 0 */
__raw_writel(htonl(0x00000000), &dev->uregs->intm1);
__raw_writel(htonl(0x00000000), &dev->uregs->intm2);
eieio();
val = __raw_readl(&dev->uregs->vstat);
val &= ~(0x00004000);
__raw_writel(val, &dev->uregs->vstat);
eieio();
debug("Tsi148: register struct size %08x\n", sizeof(TSI148));
return 0;
break_30:
free(dev);
dev = NULL;
return result;
}
/*
* Create pci slave window (access: pci -> vme)
*/
int tsi148_pci_slave_window(unsigned int pciAddr, unsigned int vmeAddr,
int size, int vam, int vdw)
{
int result, i;
unsigned int ctl = 0;
if (NULL == dev) {
result = -1;
goto exit_10;
}
for (i = 0; i < 8; i++) {
if (0x00000000 == readl(&dev->uregs->outbound[i].otat))
break;
}
if (i > 7) {
printf("Tsi148: No Image available\n");
result = -1;
goto exit_10;
}
debug("Tsi148: Using image %d\n", i);
printf("Tsi148: Pci addr %08x\n", pciAddr);
__raw_writel(htonl(pciAddr), &dev->uregs->outbound[i].otsal);
__raw_writel(0x00000000, &dev->uregs->outbound[i].otsau);
__raw_writel(htonl(pciAddr + size), &dev->uregs->outbound[i].oteal);
__raw_writel(0x00000000, &dev->uregs->outbound[i].oteau);
__raw_writel(htonl(vmeAddr - pciAddr), &dev->uregs->outbound[i].otofl);
__raw_writel(0x00000000, &dev->uregs->outbound[i].otofu);
switch (vam & VME_AM_Axx) {
case VME_AM_A16:
ctl = 0x00000000;
break;
case VME_AM_A24:
ctl = 0x00000001;
break;
case VME_AM_A32:
ctl = 0x00000002;
break;
}
switch (vam & VME_AM_Mxx) {
case VME_AM_DATA:
ctl |= 0x00000000;
break;
case VME_AM_PROG:
ctl |= 0x00000010;
break;
}
if (vam & VME_AM_SUP)
ctl |= 0x00000020;
switch (vdw & VME_FLAG_Dxx) {
case VME_FLAG_D16:
ctl |= 0x00000000;
break;
case VME_FLAG_D32:
ctl |= 0x00000040;
break;
}
ctl |= 0x80040000; /* enable, no prefetch */
__raw_writel(htonl(ctl), &dev->uregs->outbound[i].otat);
debug("Tsi148: window-addr =%p\n",
&dev->uregs->outbound[i].otsau);
debug("Tsi148: pci slave window[%d] attr =%08x\n",
i, ntohl(__raw_readl(&dev->uregs->outbound[i].otat)));
debug("Tsi148: pci slave window[%d] start =%08x\n",
i, ntohl(__raw_readl(&dev->uregs->outbound[i].otsal)));
debug("Tsi148: pci slave window[%d] end =%08x\n",
i, ntohl(__raw_readl(&dev->uregs->outbound[i].oteal)));
debug("Tsi148: pci slave window[%d] offset=%08x\n",
i, ntohl(__raw_readl(&dev->uregs->outbound[i].otofl)));
return 0;
exit_10:
return -result;
}
unsigned int tsi148_eval_vam(int vam)
{
unsigned int ctl = 0;
switch (vam & VME_AM_Axx) {
case VME_AM_A16:
ctl = 0x00000000;
break;
case VME_AM_A24:
ctl = 0x00000010;
break;
case VME_AM_A32:
ctl = 0x00000020;
break;
}
switch (vam & VME_AM_Mxx) {
case VME_AM_DATA:
ctl |= 0x00000001;
break;
case VME_AM_PROG:
ctl |= 0x00000002;
break;
case (VME_AM_PROG | VME_AM_DATA):
ctl |= 0x00000003;
break;
}
if (vam & VME_AM_SUP)
ctl |= 0x00000008;
if (vam & VME_AM_USR)
ctl |= 0x00000004;
return ctl;
}
/*
* Create vme slave window (access: vme -> pci)
*/
int tsi148_vme_slave_window(unsigned int vmeAddr, unsigned int pciAddr,
int size, int vam)
{
int result, i;
unsigned int ctl = 0;
if (NULL == dev) {
result = -1;
goto exit_10;
}
for (i = 0; i < 8; i++) {
if (0x00000000 == readl(&dev->uregs->inbound[i].itat))
break;
}
if (i > 7) {
printf("Tsi148: No Image available\n");
result = -1;
goto exit_10;
}
debug("Tsi148: Using image %d\n", i);
__raw_writel(htonl(vmeAddr), &dev->uregs->inbound[i].itsal);
__raw_writel(0x00000000, &dev->uregs->inbound[i].itsau);
__raw_writel(htonl(vmeAddr + size), &dev->uregs->inbound[i].iteal);
__raw_writel(0x00000000, &dev->uregs->inbound[i].iteau);
__raw_writel(htonl(pciAddr - vmeAddr), &dev->uregs->inbound[i].itofl);
if (vmeAddr > pciAddr)
__raw_writel(0xffffffff, &dev->uregs->inbound[i].itofu);
else
__raw_writel(0x00000000, &dev->uregs->inbound[i].itofu);
ctl = tsi148_eval_vam(vam);
ctl |= 0x80000000; /* enable */
__raw_writel(htonl(ctl), &dev->uregs->inbound[i].itat);
debug("Tsi148: window-addr =%p\n",
&dev->uregs->inbound[i].itsau);
debug("Tsi148: vme slave window[%d] attr =%08x\n",
i, ntohl(__raw_readl(&dev->uregs->inbound[i].itat)));
debug("Tsi148: vme slave window[%d] start =%08x\n",
i, ntohl(__raw_readl(&dev->uregs->inbound[i].itsal)));
debug("Tsi148: vme slave window[%d] end =%08x\n",
i, ntohl(__raw_readl(&dev->uregs->inbound[i].iteal)));
debug("Tsi148: vme slave window[%d] offset=%08x\n",
i, ntohl(__raw_readl(&dev->uregs->inbound[i].itofl)));
return 0;
exit_10:
return -result;
}
/*
* Create vme slave window (access: vme -> gcsr)
*/
int tsi148_vme_gcsr_window(unsigned int vmeAddr, int vam)
{
int result;
unsigned int ctl;
result = 0;
if (NULL == dev) {
result = 1;
} else {
__raw_writel(htonl(vmeAddr), &dev->uregs->gbal);
__raw_writel(0x00000000, &dev->uregs->gbau);
ctl = tsi148_eval_vam(vam);
ctl |= 0x00000080; /* enable */
__raw_writel(htonl(ctl), &dev->uregs->gcsrat);
}
return result;
}
/*
* Create vme slave window (access: vme -> crcsr)
*/
int tsi148_vme_crcsr_window(unsigned int vmeAddr)
{
int result;
unsigned int ctl;
result = 0;
if (NULL == dev) {
result = 1;
} else {
__raw_writel(htonl(vmeAddr), &dev->uregs->crol);
__raw_writel(0x00000000, &dev->uregs->crou);
ctl = 0x00000080; /* enable */
__raw_writel(htonl(ctl), &dev->uregs->crat);
}
return result;
}
/*
* Create vme slave window (access: vme -> crg)
*/
int tsi148_vme_crg_window(unsigned int vmeAddr, int vam)
{
int result;
unsigned int ctl;
result = 0;
if (NULL == dev) {
result = 1;
} else {
__raw_writel(htonl(vmeAddr), &dev->uregs->cbal);
__raw_writel(0x00000000, &dev->uregs->cbau);
ctl = tsi148_eval_vam(vam);
ctl |= 0x00000080; /* enable */
__raw_writel(htonl(ctl), &dev->uregs->crgat);
}
return result;
}
/*
* Tundra Tsi148 configuration
*/
int do_tsi148(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr1 = 0, addr2 = 0, size = 0, vam = 0, vdw = 0;
char cmd = 'x';
/* get parameter */
if (argc > 1)
cmd = argv[1][0];
if (argc > 2)
addr1 = simple_strtoul(argv[2], NULL, 16);
if (argc > 3)
addr2 = simple_strtoul(argv[3], NULL, 16);
if (argc > 4)
size = simple_strtoul(argv[4], NULL, 16);
if (argc > 5)
vam = simple_strtoul(argv[5], NULL, 16);
if (argc > 6)
vdw = simple_strtoul(argv[6], NULL, 16);
switch (cmd) {
case 'c':
if (strcmp(argv[1], "crg") == 0) {
vam = addr2;
printf("Tsi148: Configuring VME CRG Window "
"(VME->CRG):\n");
printf(" vme=%08lx vam=%02lx\n", addr1, vam);
tsi148_vme_crg_window(addr1, vam);
} else {
printf("Tsi148: Configuring VME CR/CSR Window "
"(VME->CR/CSR):\n");
printf(" pci=%08lx\n", addr1);
tsi148_vme_crcsr_window(addr1);
}
break;
case 'i': /* init */
tsi148_init();
break;
case 'g':
vam = addr2;
printf("Tsi148: Configuring VME GCSR Window (VME->GCSR):\n");
printf(" vme=%08lx vam=%02lx\n", addr1, vam);
tsi148_vme_gcsr_window(addr1, vam);
break;
case 'v': /* vme */
printf("Tsi148: Configuring VME Slave Window (VME->PCI):\n");
printf(" vme=%08lx pci=%08lx size=%08lx vam=%02lx\n",
addr1, addr2, size, vam);
tsi148_vme_slave_window(addr1, addr2, size, vam);
break;
case 'p': /* pci */
printf("Tsi148: Configuring PCI Slave Window (PCI->VME):\n");
printf(" pci=%08lx vme=%08lx size=%08lx vam=%02lx vdw=%02lx\n",
addr1, addr2, size, vam, vdw);
tsi148_pci_slave_window(addr1, addr2, size, vam, vdw);
break;
default:
printf("Tsi148: Command %s not supported!\n", argv[1]);
}
return 0;
}
U_BOOT_CMD(
tsi148, 7, 1, do_tsi148,
"initialize and configure Turndra Tsi148\n",
"init\n"
" - initialize tsi148\n"
"tsi148 vme [vme_addr] [pci_addr] [size] [vam]\n"
" - create vme slave window (access: vme->pci)\n"
"tsi148 pci [pci_addr] [vme_addr] [size] [vam] [vdw]\n"
" - create pci slave window (access: pci->vme)\n"
"tsi148 crg [vme_addr] [vam]\n"
" - create vme slave window: (access vme->CRG\n"
"tsi148 crcsr [pci_addr]\n"
" - create vme slave window: (access vme->CR/CSR\n"
"tsi148 gcsr [vme_addr] [vam]\n"
" - create vme slave window: (access vme->GCSR\n"
" [vam] = VMEbus Address-Modifier: 01 -> A16 Address Space\n"
" 02 -> A24 Address Space\n"
" 03 -> A32 Address Space\n"
" 04 -> Usr AM Code\n"
" 08 -> Supervisor AM Code\n"
" 10 -> Data AM Code\n"
" 20 -> Program AM Code\n"
" [vdw] = VMEbus Maximum Datawidth: 02 -> D16 Data Width\n"
" 03 -> D32 Data Width\n"
);