mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 18:28:55 +00:00
e91907a146
This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
250 lines
7.9 KiB
C
250 lines
7.9 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2018
|
|
* Lukasz Majewski, DENX Software Engineering, lukma@denx.de
|
|
*
|
|
* Copyright 2016 3ADEV <http://3adev.com>
|
|
* Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
|
|
*
|
|
* Configuration settings for BK4R1.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/* Define the BK4r1-specific env commands */
|
|
#define BK4_EXTRA_ENV_SETTINGS \
|
|
"bootlimit=3\0" \
|
|
"eraseuserdata=false\0" \
|
|
"altbootcmd=led 5 on; " \
|
|
"boot\0" \
|
|
"set_gpio103=mw 0x400ff0c4 0x0080; mw 0x4004819C 0x000011bf\0" \
|
|
"set_gpio102=mw 0x400ff0c4 0x40; mw 0x40048198 0x000011bf\0" \
|
|
"set_gpio96=mw 0x40048180 0x282; mw 0x400ff0c4 0x1\0"\
|
|
"set_gpio122=mw 0x400481e8 0x0282; mw 0x400ff0c4 0x04000000\0"\
|
|
"set_gpio6=mw 0x40048018 0x282; mw 0x400ff008 0x40\0"\
|
|
"manage_userdata=" MANAGE_USERDATA "\0"\
|
|
"ncenable=true\0"\
|
|
"ncserverip=192.168.0.77\0"\
|
|
"if_netconsole=ping $ncserverip\0"\
|
|
"start_netconsole=setenv ncip $serverip; setenv bootdelay 10;" \
|
|
"setenv stdin nc; setenv stdout nc; setenv stderr nc; version;\0" \
|
|
"preboot=" BK4_NET_INIT \
|
|
"if ${ncenable}; then run if_netconsole start_netconsole; fi\0"
|
|
|
|
/* BK4r1 boot command sets GPIO103/PTC30 to force USB hub out of reset*/
|
|
#define BK4_BOOTCOMMAND "run set_gpio122; run set_gpio96; sf probe; " \
|
|
"run manage_userdata; "
|
|
|
|
/* Enable PREBOOT variable */
|
|
|
|
/* Set ARP_TIMEOUT to 500ms */
|
|
#define CONFIG_ARP_TIMEOUT 500UL
|
|
|
|
/* Set ARP_TIMEOUT_COUNT to 3 repetitions */
|
|
#define CONFIG_NET_RETRY_COUNT 5
|
|
|
|
/* BK4r1 net init sets GPIO122/PTE17 to enable Ethernet */
|
|
#define BK4_NET_INIT "run set_gpio122;"
|
|
|
|
/* Check if userdata volume shall be erased */
|
|
#define MANAGE_USERDATA "if ${eraseuserdata}; " \
|
|
"then ubi part system; " \
|
|
"ubi remove userdata; " \
|
|
"ubi create userdata; " \
|
|
"ubi detach; " \
|
|
"setenv eraseuserdata false; " \
|
|
"saveenv; " \
|
|
"fi; "
|
|
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <linux/sizes.h>
|
|
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
|
|
/* Enable passing of ATAGs */
|
|
#define CONFIG_CMDLINE_TAG
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 4 * SZ_1M)
|
|
|
|
/* NAND support */
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
|
|
#define IMX_FEC1_BASE ENET1_BASE_ADDR
|
|
|
|
/* QSPI Configs*/
|
|
#ifdef CONFIG_FSL_QSPI
|
|
#define FSL_QSPI_FLASH_SIZE (SZ_16M)
|
|
#define FSL_QSPI_FLASH_NUM 2
|
|
#define CONFIG_SYS_FSL_QSPI_LE
|
|
#endif
|
|
|
|
#define CONFIG_LOADADDR 0x82000000
|
|
|
|
/* We boot from the gfxRAM area of the OCRAM. */
|
|
#define CONFIG_BOARD_SIZE_LIMIT 520192
|
|
|
|
/* boot command, including the target-defined one if any */
|
|
#define CONFIG_BOOTCOMMAND BK4_BOOTCOMMAND "run bootcmd_nand"
|
|
|
|
/* Extra env settings (including the target-defined ones if any) */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
BK4_EXTRA_ENV_SETTINGS \
|
|
"autoload=no\0" \
|
|
"fdt_high=0xffffffff\0" \
|
|
"initrd_high=0xffffffff\0" \
|
|
"blimg_file=u-boot.vyb\0" \
|
|
"blimg_addr=0x81000000\0" \
|
|
"dtbkernel_file=fitImage\0" \
|
|
"dtbkernel_addr=0x82000000\0" \
|
|
"ram_file=uRamdisk\0" \
|
|
"ram_addr=0x83000000\0" \
|
|
"filesys=rootfs.ubifs\0" \
|
|
"sys_addr=0x81000000\0" \
|
|
"nfs_root=/path/to/nfs/root\0" \
|
|
"tftptimeout=1000\0" \
|
|
"tftptimeoutcountmax=1000000\0" \
|
|
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
|
|
"ipaddr=192.168.0.60\0" \
|
|
"serverip=192.168.0.1\0" \
|
|
"bootargs_base=setenv bootargs rw " \
|
|
"console=ttyLP1,115200n8\0" \
|
|
"bootargs_sd=setenv bootargs ${bootargs} " \
|
|
"root=/dev/mmcblk0p2 rootwait\0" \
|
|
"bootargs_nand=setenv bootargs ${bootargs} " \
|
|
"ubi.mtd=5 rootfstype=" \
|
|
"ubifs root=ubi0:rootfs${active_workset}\0" \
|
|
"bootargs_ram=setenv bootargs ${bootargs} " \
|
|
"root=/dev/ram rw initrd=${ram_addr}\0" \
|
|
"bootargs_mtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
|
|
"bootcmd_sd=run bootargs_base bootargs_sd bootargs_mtd; " \
|
|
"fatload mmc 0:2 ${dtbkernel_addr} ${dtbkernel_file}; " \
|
|
"bootm ${dtbkernel_addr}\0" \
|
|
"bootcmd_nand=sf probe;run bootargs_base bootargs_nand bootargs_mtd; " \
|
|
"ubi part dtbkernel; " \
|
|
"ubi readvol ${dtbkernel_addr} dtbkernel${active_workset}; " \
|
|
"led 0 on; " \
|
|
"bootm ${dtbkernel_addr}\0" \
|
|
"bootcmd_ram=run bootargs_base bootargs_ram bootargs_mtd; " \
|
|
"nand read ${fdt_addr} dtb; " \
|
|
"nand read ${kernel_addr} kernel; " \
|
|
"nand read ${ram_addr} root; " \
|
|
"bootz ${kernel_addr} ${ram_addr} ${fdt_addr}\0" \
|
|
"update_bootloader_from_sd=if fatload mmc 0:2 ${blimg_addr} " \
|
|
"${blimg_file}; " \
|
|
"then sf probe; " \
|
|
"mtdparts default; " \
|
|
"nand erase.part bootloader; " \
|
|
"nand write ${blimg_addr} bootloader ${filesize}; fi\0" \
|
|
"update_bootloader_from_tftp=if tftp ${blimg_addr} "\
|
|
"${tftpdir}${blimg_file}; "\
|
|
"then sf probe; " \
|
|
"mtdparts default; " \
|
|
"nand erase.part bootloader; " \
|
|
"nand write ${blimg_addr} bootloader ${filesize}; fi\0" \
|
|
"update_dtbkernel_from_sd=if fatload mmc 0:2 ${dtbkernel_addr} " \
|
|
"${dtbkernel_file}; " \
|
|
"then sf probe; " \
|
|
"ubi part dtbkernel; " \
|
|
"ubi write ${dtbkernel_addr} dtbkernel${active_workset} " \
|
|
"${filesize}; " \
|
|
"ubi detach; fi\0" \
|
|
"update_dtbkernel_from_tftp=if tftp ${dtbkernel_addr} " \
|
|
"${tftpdir}${dtbkernel_file}; " \
|
|
"then sf probe; " \
|
|
"ubi part dtbkernel; " \
|
|
"ubi write ${dtbkernel_addr} dtbkernel${active_workset} " \
|
|
"${filesize}; " \
|
|
"ubi detach; fi\0" \
|
|
"update_ramdisk_from_sd=if fatload mmc 0:2 ${ram_addr} " \
|
|
"${ram_file}; " \
|
|
"then sf probe; " \
|
|
"mtdparts default; " \
|
|
"nand erase.part initrd; " \
|
|
"nand write ${ram_addr} initrd ${filesize}; fi\0" \
|
|
"update_ramdisk_from_tftp=if tftp ${ram_addr} ${tftpdir}${ram_file}; " \
|
|
"then sf probe; " \
|
|
"nand erase.part initrd; " \
|
|
"nand write ${ram_addr} initrd ${filesize}; fi\0" \
|
|
"update_rootfs_from_sd=if fatload mmc 0:2 ${sys_addr} " \
|
|
"${filesys}; " \
|
|
"then sf probe; " \
|
|
"ubi part system; " \
|
|
"ubi write ${sys_addr} rootfs${active_workset} ${filesize}; " \
|
|
"ubi detach; fi\0" \
|
|
"update_rootfs_from_tftp=if tftp ${sys_addr} ${tftpdir}${filesys}; " \
|
|
"then sf probe; " \
|
|
"ubi part system; " \
|
|
"ubi write ${sys_addr} rootfs${active_workset} ${filesize}; " \
|
|
"ubi detach; fi\0" \
|
|
"setup_dtbkernel=nand erase.part dtbkernel; " \
|
|
"ubi part dtbkernel; " \
|
|
"ubi create dtbkernel1 972000 s; " \
|
|
"ubi create dtbkernel2 972000 s; " \
|
|
"ubi detach\0" \
|
|
"setup_system=nand erase.part system; " \
|
|
"ubi part system; " \
|
|
"ubi create rootfs1 15E15000 d; " \
|
|
"ubi create rootfs2 15E15000 d; " \
|
|
"ubi create userdata; " \
|
|
"ubi detach\0" \
|
|
"setup_nor1=" BK4_NET_INIT \
|
|
"if tftp ${sys_addr} ${tftpdir}ubinor1.img; " \
|
|
"then sf probe 0:0; " \
|
|
"sf erase 0 01000000; " \
|
|
"mtdparts default; " \
|
|
"ubi part nor; " \
|
|
"ubi create nor1fs; " \
|
|
"ubi write ${sys_addr} nor1fs ${filesize}; " \
|
|
"ubi detach; fi\0" \
|
|
"setup_nor2=" BK4_NET_INIT \
|
|
"if tftp ${sys_addr} ${tftpdir}ubinor2.img; " \
|
|
"then sf probe 0:1; " \
|
|
"sf erase 0 01000000; " \
|
|
"mtdparts default; " \
|
|
"ubi part nor; " \
|
|
"ubi create nor2fs; " \
|
|
"ubi write ${sys_addr} nor2fs ${filesize}; " \
|
|
"ubi detach; fi\0" \
|
|
"prepare_install_bk4r1_envs=" \
|
|
"echo 'Preparing envs for SD card recovery!';" \
|
|
"setenv ipaddr 192.168.0.99;" \
|
|
"setenv serverip 192.168.0.50;" \
|
|
"\0" \
|
|
"install_bk4r1rs="\
|
|
"led 0 on; " \
|
|
"nand erase.chip; mtdparts default; "\
|
|
"led 1 on; "\
|
|
"run setup_dtbkernel; " \
|
|
"run setup_system; " \
|
|
"led 2 on;" \
|
|
"run update_bootloader_from_sd; "\
|
|
"run update_dtbkernel_from_sd; "\
|
|
"run update_rootfs_from_sd; "\
|
|
"setenv bootcmd 'run bootcmd_nand'; "\
|
|
"saveenv; " \
|
|
"led 3 on; " \
|
|
"echo Finished - Please Power off, REMOVE SDCARD and set boot" \
|
|
"source to NAND\0" \
|
|
"active_workset=1\0"
|
|
|
|
/* Miscellaneous configurable options */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
|
|
/* Physical memory map */
|
|
#define PHYS_SDRAM (0x80000000)
|
|
#define PHYS_SDRAM_SIZE (SZ_512M)
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
#endif /* __CONFIG_H */
|