mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 01:38:22 +00:00
f601624ecd
Staticize local functions in mxs_auart driver. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Marek Vasut <marex@denx.de>
151 lines
3.9 KiB
C
151 lines
3.9 KiB
C
/*
|
|
* Freescale i.MX23/i.MX28 AUART driver
|
|
*
|
|
* Copyright (C) 2013 Andreas Wass <andreas.wass@dalelven.com>
|
|
*
|
|
* Based on the MXC serial driver:
|
|
*
|
|
* (c) 2007 Sascha Hauer <s.hauer@pengutronix.de>
|
|
*
|
|
* Further based on the Linux mxs-auart.c driver:
|
|
*
|
|
* Freescale STMP37XX/STMP38X Application UART drkiver
|
|
* Copyright 2008-2010 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <serial.h>
|
|
#include <linux/compiler.h>
|
|
#include <asm/arch/regs-base.h>
|
|
#include <asm/arch/regs-uartapp.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifndef CONFIG_MXS_AUART_BASE
|
|
#error "CONFIG_MXS_AUART_BASE must be set to the base UART to use"
|
|
#endif
|
|
|
|
/* AUART clock always supplied by XTAL and always 24MHz */
|
|
#define MXS_AUART_CLK 24000000
|
|
|
|
static struct mxs_uartapp_regs *get_uartapp_registers(void)
|
|
{
|
|
return (struct mxs_uartapp_regs *)CONFIG_MXS_AUART_BASE;
|
|
}
|
|
|
|
/**
|
|
* Sets the baud rate and settings.
|
|
* The settings are: 8 data bits, no parit and 1 stop bit.
|
|
*/
|
|
static void mxs_auart_setbrg(void)
|
|
{
|
|
u32 div;
|
|
u32 linectrl = 0;
|
|
struct mxs_uartapp_regs *regs = get_uartapp_registers();
|
|
|
|
if (!gd->baudrate)
|
|
gd->baudrate = CONFIG_BAUDRATE;
|
|
|
|
/*
|
|
* From i.MX28 datasheet:
|
|
* div is calculated by calculating UARTCLK*32/baudrate, rounded to int
|
|
* div must be between 0xEC and 0x003FFFC0 inclusive
|
|
* Lowest 6 bits of div goes in BAUD_DIVFRAC part of LINECTRL register
|
|
* Next 16 bits goes in BAUD_DIVINT part of LINECTRL register
|
|
*/
|
|
div = (MXS_AUART_CLK * 32) / gd->baudrate;
|
|
if (div < 0xEC || div > 0x003FFFC0)
|
|
return;
|
|
|
|
linectrl |= ((div & UARTAPP_LINECTRL_EXTRACT_BAUD_DIVFRAC_MASK) <<
|
|
UARTAPP_LINECTRL_BAUD_DIVFRAC_OFFSET) &
|
|
UARTAPP_LINECTRL_BAUD_DIVFRAC_MASK;
|
|
linectrl |= ((div >> UARTAPP_LINECTRL_EXTRACT_BAUD_DIVINT_OFFSET) <<
|
|
UARTAPP_LINECTRL_BAUD_DIVINT_OFFSET) &
|
|
UARTAPP_LINECTRL_BAUD_DIVINT_MASK;
|
|
|
|
/* Word length: 8 bits */
|
|
linectrl |= UARTAPP_LINECTRL_WLEN_8BITS;
|
|
|
|
/* Enable FIFOs. */
|
|
linectrl |= UARTAPP_LINECTRL_FEN_MASK;
|
|
|
|
/* Write above settings, no parity, 1 stop bit */
|
|
writel(linectrl, ®s->hw_uartapp_linectrl);
|
|
}
|
|
|
|
static int mxs_auart_init(void)
|
|
{
|
|
struct mxs_uartapp_regs *regs = get_uartapp_registers();
|
|
/* Reset everything */
|
|
mxs_reset_block(®s->hw_uartapp_ctrl0_reg);
|
|
/* Disable interrupts */
|
|
writel(0, ®s->hw_uartapp_intr);
|
|
/* Set baud rate and settings */
|
|
serial_setbrg();
|
|
/* Disable RTS and CTS, ignore LINECTRL2 register */
|
|
writel(UARTAPP_CTRL2_RTSEN_MASK |
|
|
UARTAPP_CTRL2_CTSEN_MASK |
|
|
UARTAPP_CTRL2_USE_LCR2_MASK,
|
|
®s->hw_uartapp_ctrl2_clr);
|
|
/* Enable receiver, transmitter and UART */
|
|
writel(UARTAPP_CTRL2_RXE_MASK |
|
|
UARTAPP_CTRL2_TXE_MASK |
|
|
UARTAPP_CTRL2_UARTEN_MASK,
|
|
®s->hw_uartapp_ctrl2_set);
|
|
return 0;
|
|
}
|
|
|
|
static void mxs_auart_putc(const char c)
|
|
{
|
|
struct mxs_uartapp_regs *regs = get_uartapp_registers();
|
|
/* Wait in loop while the transmit FIFO is full */
|
|
while (readl(®s->hw_uartapp_stat) & UARTAPP_STAT_TXFF_MASK)
|
|
;
|
|
|
|
writel(c, ®s->hw_uartapp_data);
|
|
|
|
if (c == '\n')
|
|
mxs_auart_putc('\r');
|
|
}
|
|
|
|
static int mxs_auart_tstc(void)
|
|
{
|
|
struct mxs_uartapp_regs *regs = get_uartapp_registers();
|
|
/* Checks if receive FIFO is empty */
|
|
return !(readl(®s->hw_uartapp_stat) & UARTAPP_STAT_RXFE_MASK);
|
|
}
|
|
|
|
static int mxs_auart_getc(void)
|
|
{
|
|
struct mxs_uartapp_regs *regs = get_uartapp_registers();
|
|
/* Wait until a character is available to read */
|
|
while (!mxs_auart_tstc())
|
|
;
|
|
/* Read the character from the data register */
|
|
return readl(®s->hw_uartapp_data) & 0xFF;
|
|
}
|
|
|
|
static struct serial_device mxs_auart_drv = {
|
|
.name = "mxs_auart_serial",
|
|
.start = mxs_auart_init,
|
|
.stop = NULL,
|
|
.setbrg = mxs_auart_setbrg,
|
|
.putc = mxs_auart_putc,
|
|
.puts = default_serial_puts,
|
|
.getc = mxs_auart_getc,
|
|
.tstc = mxs_auart_tstc,
|
|
};
|
|
|
|
void mxs_auart_initialize(void)
|
|
{
|
|
serial_register(&mxs_auart_drv);
|
|
}
|
|
|
|
__weak struct serial_device *default_serial_console(void)
|
|
{
|
|
return &mxs_auart_drv;
|
|
}
|