u-boot/configs/uniphier_ld4_sld8_defconfig
Masahiro Yamada ae7a0d5b66 ARM: uniphier: enable MTD partition and UBI
Enable "mtdparts" and "ubi" commands for uniphier_v8_defconfig to
use UBI on NAND devices.

Enable only "mtdparts" for uniphier_{v7,ld4_sld8}_defconfig because
enabling UBI would increase 170KB, which would be memory footprint
problem.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25 08:47:53 +09:00

59 lines
1.5 KiB
Text

CONFIG_ARM=y
CONFIG_ARCH_UNIPHIER=y
CONFIG_SYS_TEXT_BASE=0x84000000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
CONFIG_ARCH_UNIPHIER_LD4_SLD8=y
CONFIG_MICRO_SUPPORT_CARD=y
CONFIG_DEFAULT_DEVICE_TREE="uniphier-ld4-ref"
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_LOGLEVEL=6
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_CONFIG=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_IMLS=y
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_ENV_EXISTS is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
# CONFIG_CMD_MISC is not set
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=uniphier-nand.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=uniphier-nand.0:1m(firmware),-(UBI)"
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_GPIO_UNIPHIER=y
CONFIG_MISC=y
CONFIG_I2C_EEPROM=y
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
CONFIG_MMC_UNIPHIER=y
CONFIG_MTD_PARTITIONS=y
CONFIG_NAND=y
CONFIG_NAND_DENALI_DT=y
CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
CONFIG_SPL_NAND_DENALI=y
CONFIG_NETDEVICES=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x0
CONFIG_SMC911X_32_BIT=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_STORAGE=y
CONFIG_PANIC_HANG=y
CONFIG_FDT_FIXUP_PARTITIONS=y