u-boot/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

176 lines
3 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2015 Freescale Semiconductor, Inc.
*/
#ifndef __FSL_SERDES_H__
#define __FSL_SERDES_H__
#include <config.h>
#ifdef CONFIG_FSL_LSCH3
enum srds_prtcl {
/*
* Nobody will check whether the device 'NONE' has been configured,
* So use it to indicate if the serdes_prtcl_map has been initialized.
*/
NONE = 0,
PCIE1,
PCIE2,
PCIE3,
PCIE4,
SATA1,
SATA2,
XAUI1,
XAUI2,
XFI1,
XFI2,
XFI3,
XFI4,
XFI5,
XFI6,
XFI7,
XFI8,
SGMII1,
SGMII2,
SGMII3,
SGMII4,
SGMII5,
SGMII6,
SGMII7,
SGMII8,
SGMII9,
SGMII10,
SGMII11,
SGMII12,
SGMII13,
SGMII14,
SGMII15,
SGMII16,
QSGMII_A,
QSGMII_B,
QSGMII_C,
QSGMII_D,
SERDES_PRCTL_COUNT
};
enum srds {
FSL_SRDS_1 = 0,
FSL_SRDS_2 = 1,
};
#elif defined(CONFIG_FSL_LSCH2)
enum srds_prtcl {
/*
* Nobody will check whether the device 'NONE' has been configured,
* So use it to indicate if the serdes_prtcl_map has been initialized.
*/
NONE = 0,
PCIE1,
PCIE2,
PCIE3,
PCIE4,
SATA1,
SATA2,
SRIO1,
SRIO2,
SGMII_FM1_DTSEC1,
SGMII_FM1_DTSEC2,
SGMII_FM1_DTSEC3,
SGMII_FM1_DTSEC4,
SGMII_FM1_DTSEC5,
SGMII_FM1_DTSEC6,
SGMII_FM1_DTSEC9,
SGMII_FM1_DTSEC10,
SGMII_FM2_DTSEC1,
SGMII_FM2_DTSEC2,
SGMII_FM2_DTSEC3,
SGMII_FM2_DTSEC4,
SGMII_FM2_DTSEC5,
SGMII_FM2_DTSEC6,
SGMII_FM2_DTSEC9,
SGMII_FM2_DTSEC10,
SGMII_TSEC1,
SGMII_TSEC2,
SGMII_TSEC3,
SGMII_TSEC4,
XAUI_FM1,
XAUI_FM2,
AURORA,
CPRI1,
CPRI2,
CPRI3,
CPRI4,
CPRI5,
CPRI6,
CPRI7,
CPRI8,
XAUI_FM1_MAC9,
XAUI_FM1_MAC10,
XAUI_FM2_MAC9,
XAUI_FM2_MAC10,
HIGIG_FM1_MAC9,
HIGIG_FM1_MAC10,
HIGIG_FM2_MAC9,
HIGIG_FM2_MAC10,
QSGMII_FM1_A, /* A indicates MACs 1,2,5,6 */
QSGMII_FM1_B, /* B indicates MACs 5,6,9,10 */
QSGMII_FM2_A,
QSGMII_FM2_B,
XFI_FM1_MAC1,
XFI_FM1_MAC2,
XFI_FM1_MAC9,
XFI_FM1_MAC10,
XFI_FM2_MAC9,
XFI_FM2_MAC10,
INTERLAKEN,
QSGMII_SW1_A, /* Indicates ports on L2 Switch */
QSGMII_SW1_B,
SGMII_2500_FM1_DTSEC1,
SGMII_2500_FM1_DTSEC2,
SGMII_2500_FM1_DTSEC3,
SGMII_2500_FM1_DTSEC4,
SGMII_2500_FM1_DTSEC5,
SGMII_2500_FM1_DTSEC6,
SGMII_2500_FM1_DTSEC9,
SGMII_2500_FM1_DTSEC10,
SGMII_2500_FM2_DTSEC1,
SGMII_2500_FM2_DTSEC2,
SGMII_2500_FM2_DTSEC3,
SGMII_2500_FM2_DTSEC4,
SGMII_2500_FM2_DTSEC5,
SGMII_2500_FM2_DTSEC6,
SGMII_2500_FM2_DTSEC9,
SGMII_2500_FM2_DTSEC10,
TX_CLK,
SERDES_PRCTL_COUNT
};
enum srds {
FSL_SRDS_1 = 0,
FSL_SRDS_2 = 1,
};
#endif
int is_serdes_configured(enum srds_prtcl device);
void fsl_serdes_init(void);
int serdes_get_first_lane(u32 sd, enum srds_prtcl device);
enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane);
int is_serdes_prtcl_valid(int serdes, u32 prtcl);
int serdes_get_number(int serdes, int cfg);
void fsl_rgmii_init(void);
#ifdef CONFIG_FSL_LSCH2
const char *serdes_clock_to_string(u32 clock);
int get_serdes_protocol(void);
#endif
#ifdef CONFIG_SYS_HAS_SERDES
/* Get the volt of SVDD in unit mV */
int get_serdes_volt(void);
/* Set the volt of SVDD in unit mV */
int set_serdes_volt(int svdd);
/* The target volt of SVDD in unit mV */
int setup_serdes_volt(u32 svdd);
#endif
#endif /* __FSL_SERDES_H__ */