u-boot/drivers/serial/serial_sh.c
Nobuhiro Iwamatsu 48ca882c9f serial: sh: Add support R8A7790
This adds the preset value to register, and setup of baudrate.

Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
2013-10-17 09:43:36 +09:00

202 lines
4.1 KiB
C

/*
* SuperH SCIF device driver.
* Copyright (C) 2013 Renesas Electronics Corporation
* Copyright (C) 2007,2008,2010 Nobuhiro Iwamatsu
* Copyright (C) 2002 - 2008 Paul Mundt
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/processor.h>
#include "serial_sh.h"
#include <serial.h>
#include <linux/compiler.h>
#if defined(CONFIG_CONS_SCIF0)
# define SCIF_BASE SCIF0_BASE
#elif defined(CONFIG_CONS_SCIF1)
# define SCIF_BASE SCIF1_BASE
#elif defined(CONFIG_CONS_SCIF2)
# define SCIF_BASE SCIF2_BASE
#elif defined(CONFIG_CONS_SCIF3)
# define SCIF_BASE SCIF3_BASE
#elif defined(CONFIG_CONS_SCIF4)
# define SCIF_BASE SCIF4_BASE
#elif defined(CONFIG_CONS_SCIF5)
# define SCIF_BASE SCIF5_BASE
#elif defined(CONFIG_CONS_SCIF6)
# define SCIF_BASE SCIF6_BASE
#elif defined(CONFIG_CONS_SCIF7)
# define SCIF_BASE SCIF7_BASE
#else
# error "Default SCIF doesn't set....."
#endif
#if defined(CONFIG_SCIF_A)
#define SCIF_BASE_PORT PORT_SCIFA
#else
#define SCIF_BASE_PORT PORT_SCIF
#endif
static struct uart_port sh_sci = {
.membase = (unsigned char*)SCIF_BASE,
.mapbase = SCIF_BASE,
.type = SCIF_BASE_PORT,
};
static void sh_serial_setbrg(void)
{
DECLARE_GLOBAL_DATA_PTR;
sci_out(&sh_sci, SCBRR,
SCBRR_VALUE(gd->baudrate, CONFIG_SH_SCIF_CLK_FREQ));
}
static int sh_serial_init(void)
{
sci_out(&sh_sci, SCSCR , SCSCR_INIT(&sh_sci));
sci_out(&sh_sci, SCSCR , SCSCR_INIT(&sh_sci));
sci_out(&sh_sci, SCSMR, 0);
sci_out(&sh_sci, SCSMR, 0);
sci_out(&sh_sci, SCFCR, SCFCR_RFRST|SCFCR_TFRST);
sci_in(&sh_sci, SCFCR);
sci_out(&sh_sci, SCFCR, 0);
serial_setbrg();
return 0;
}
#if defined(CONFIG_CPU_SH7760) || \
defined(CONFIG_CPU_SH7780) || \
defined(CONFIG_CPU_SH7785) || \
defined(CONFIG_CPU_SH7786)
static int scif_rxfill(struct uart_port *port)
{
return sci_in(port, SCRFDR) & 0xff;
}
#elif defined(CONFIG_CPU_SH7763)
static int scif_rxfill(struct uart_port *port)
{
if ((port->mapbase == 0xffe00000) ||
(port->mapbase == 0xffe08000)) {
/* SCIF0/1*/
return sci_in(port, SCRFDR) & 0xff;
} else {
/* SCIF2 */
return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
}
}
#elif defined(CONFIG_ARCH_SH7372)
static int scif_rxfill(struct uart_port *port)
{
if (port->type == PORT_SCIFA)
return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
else
return sci_in(port, SCRFDR);
}
#else
static int scif_rxfill(struct uart_port *port)
{
return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
}
#endif
static int serial_rx_fifo_level(void)
{
return scif_rxfill(&sh_sci);
}
static void handle_error(void)
{
sci_in(&sh_sci, SCxSR);
sci_out(&sh_sci, SCxSR, SCxSR_ERROR_CLEAR(&sh_sci));
sci_in(&sh_sci, SCLSR);
sci_out(&sh_sci, SCLSR, 0x00);
}
void serial_raw_putc(const char c)
{
while (1) {
/* Tx fifo is empty */
if (sci_in(&sh_sci, SCxSR) & SCxSR_TEND(&sh_sci))
break;
}
sci_out(&sh_sci, SCxTDR, c);
sci_out(&sh_sci, SCxSR, sci_in(&sh_sci, SCxSR) & ~SCxSR_TEND(&sh_sci));
}
static void sh_serial_putc(const char c)
{
if (c == '\n')
serial_raw_putc('\r');
serial_raw_putc(c);
}
static int sh_serial_tstc(void)
{
if (sci_in(&sh_sci, SCxSR) & SCIF_ERRORS) {
handle_error();
return 0;
}
return serial_rx_fifo_level() ? 1 : 0;
}
int serial_getc_check(void)
{
unsigned short status;
status = sci_in(&sh_sci, SCxSR);
if (status & SCIF_ERRORS)
handle_error();
if (sci_in(&sh_sci, SCLSR) & SCxSR_ORER(&sh_sci))
handle_error();
return status & (SCIF_DR | SCxSR_RDxF(&sh_sci));
}
static int sh_serial_getc(void)
{
unsigned short status;
char ch;
while (!serial_getc_check())
;
ch = sci_in(&sh_sci, SCxRDR);
status = sci_in(&sh_sci, SCxSR);
sci_out(&sh_sci, SCxSR, SCxSR_RDxF_CLEAR(&sh_sci));
if (status & SCIF_ERRORS)
handle_error();
if (sci_in(&sh_sci, SCLSR) & SCxSR_ORER(&sh_sci))
handle_error();
return ch;
}
static struct serial_device sh_serial_drv = {
.name = "sh_serial",
.start = sh_serial_init,
.stop = NULL,
.setbrg = sh_serial_setbrg,
.putc = sh_serial_putc,
.puts = default_serial_puts,
.getc = sh_serial_getc,
.tstc = sh_serial_tstc,
};
void sh_serial_initialize(void)
{
serial_register(&sh_serial_drv);
}
__weak struct serial_device *default_serial_console(void)
{
return &sh_serial_drv;
}