mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-20 11:43:22 +00:00
94 lines
2.9 KiB
ArmAsm
94 lines
2.9 KiB
ArmAsm
/*
|
|
* (C) Copyright 2010-2011
|
|
* Graeme Russ, <graeme.russ@gmail.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <asm/processor-flags.h>
|
|
#include <asm/arch/sc520.h>
|
|
#include <generated/asm-offsets.h>
|
|
|
|
.section .text
|
|
|
|
.globl car_init
|
|
car_init:
|
|
/*
|
|
* How to enable Cache-As-RAM for the AMD Elan SC520:
|
|
* 1. Turn off the CPU Cache (may not be strictly required)
|
|
* 2. Set code execution PAR (usually the BOOTCS region) to be
|
|
* non-cachable
|
|
* 3. Create a Cachable PAR Region for an area of memory which is
|
|
* a) NOT where the code is being executed
|
|
* b) NOT SDRAM (Controller not initialised yet)
|
|
* c) WILL response to read requests
|
|
* The easiest way to do this is to create a second BOOTCS
|
|
* PAR mappnig with an address != the PAR in step 2
|
|
* 4. Issue a wbinvd to invalidate the CPU cache
|
|
* 5. Turn on the CPU Cache
|
|
* 6. Read 16kB from the cached PAR region setup in step 3
|
|
* 7. Turn off the CPU Cache (but DO NOT issue a wbinvd)
|
|
*
|
|
* The following code uses PAR2 as the cached PAR (PAR0 and PAR1
|
|
* are avoided as these are the only two PARs which can be used
|
|
* as PCI BUS Memory regions which the board might require)
|
|
*
|
|
* The configuration of PAR2 must be set in the board configuration
|
|
* file as CONFIG_SYS_SC520_CAR_PAR
|
|
*/
|
|
|
|
/* Configure Cache-As-RAM PAR */
|
|
movl $CONFIG_SYS_SC520_CAR_PAR, %eax
|
|
movl $(SC520_MMCR_BASE + GENERATED_SC520_PAR2), %edi
|
|
movl %eax, (%edi)
|
|
|
|
/* Trash the cache then turn it on */
|
|
wbinvd
|
|
movl %cr0, %eax
|
|
andl $~(X86_CR0_NW | X86_CR0_CD), %eax
|
|
movl %eax, %cr0
|
|
|
|
/*
|
|
* The cache is now enabled and empty. Map a region of memory to
|
|
* it by reading that region.
|
|
*/
|
|
movl $CONFIG_SYS_CAR_ADDR, %esi
|
|
movl $CONFIG_SYS_CAR_SIZE, %ecx
|
|
shrl $2, %ecx /* we are reading longs */
|
|
cld
|
|
rep lodsl
|
|
|
|
/* Turn off the cache, but don't trash it */
|
|
movl %cr0, %eax
|
|
orl $(X86_CR0_NW | X86_CR0_CD), %eax
|
|
movl %eax, %cr0
|
|
|
|
/* Clear the CAR region */
|
|
xorl %eax, %eax
|
|
movl $CONFIG_SYS_CAR_ADDR, %edi
|
|
movl $CONFIG_SYS_CAR_SIZE, %ecx
|
|
shrl $2, %ecx /* we are writing longs */
|
|
rep stosl
|
|
|
|
/*
|
|
* Done - We should now have CONFIG_SYS_CAR_SIZE bytes of
|
|
* Cache-As-RAM
|
|
*/
|
|
jmp car_init_ret
|