mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-20 11:43:22 +00:00
6e9a0a3967
This patch supports: - Timers - Debug UART - Clock Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
207 lines
7.7 KiB
C
207 lines
7.7 KiB
C
/*
|
|
* Freescale i.MX28 I2C Register Definitions
|
|
*
|
|
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
|
|
* on behalf of DENX Software Engineering GmbH
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
#ifndef __MX28_REGS_I2C_H__
|
|
#define __MX28_REGS_I2C_H__
|
|
|
|
#include <asm/arch/regs-common.h>
|
|
|
|
#ifndef __ASSEMBLY__
|
|
struct mx28_i2c_regs {
|
|
mx28_reg(hw_i2c_ctrl0)
|
|
mx28_reg(hw_i2c_timing0)
|
|
mx28_reg(hw_i2c_timing1)
|
|
mx28_reg(hw_i2c_timing2)
|
|
mx28_reg(hw_i2c_ctrl1)
|
|
mx28_reg(hw_i2c_stat)
|
|
mx28_reg(hw_i2c_queuectrl)
|
|
mx28_reg(hw_i2c_queuestat)
|
|
mx28_reg(hw_i2c_queuecmd)
|
|
mx28_reg(hw_i2c_queuedata)
|
|
mx28_reg(hw_i2c_data)
|
|
mx28_reg(hw_i2c_debug0)
|
|
mx28_reg(hw_i2c_debug1)
|
|
mx28_reg(hw_i2c_version)
|
|
};
|
|
#endif
|
|
|
|
#define I2C_CTRL_SFTRST (1 << 31)
|
|
#define I2C_CTRL_CLKGATE (1 << 30)
|
|
#define I2C_CTRL_RUN (1 << 29)
|
|
#define I2C_CTRL_PREACK (1 << 27)
|
|
#define I2C_CTRL_ACKNOWLEDGE (1 << 26)
|
|
#define I2C_CTRL_SEND_NAK_ON_LAST (1 << 25)
|
|
#define I2C_CTRL_MULTI_MASTER (1 << 23)
|
|
#define I2C_CTRL_CLOCK_HELD (1 << 22)
|
|
#define I2C_CTRL_RETAIN_CLOCK (1 << 21)
|
|
#define I2C_CTRL_POST_SEND_STOP (1 << 20)
|
|
#define I2C_CTRL_PRE_SEND_START (1 << 19)
|
|
#define I2C_CTRL_SLAVE_ADDRESS_ENABLE (1 << 18)
|
|
#define I2C_CTRL_MASTER_MODE (1 << 17)
|
|
#define I2C_CTRL_DIRECTION (1 << 16)
|
|
#define I2C_CTRL_XFER_COUNT_MASK 0xffff
|
|
#define I2C_CTRL_XFER_COUNT_OFFSET 0
|
|
|
|
#define I2C_TIMING0_HIGH_COUNT_MASK (0x3ff << 16)
|
|
#define I2C_TIMING0_HIGH_COUNT_OFFSET 16
|
|
#define I2C_TIMING0_RCV_COUNT_MASK 0x3ff
|
|
#define I2C_TIMING0_RCV_COUNT_OFFSET 0
|
|
|
|
#define I2C_TIMING1_LOW_COUNT_MASK (0x3ff << 16)
|
|
#define I2C_TIMING1_LOW_COUNT_OFFSET 16
|
|
#define I2C_TIMING1_XMIT_COUNT_MASK 0x3ff
|
|
#define I2C_TIMING1_XMIT_COUNT_OFFSET 0
|
|
|
|
#define I2C_TIMING2_BUS_FREE_MASK (0x3ff << 16)
|
|
#define I2C_TIMING2_BUS_FREE_OFFSET 16
|
|
#define I2C_TIMING2_LEADIN_COUNT_MASK 0x3ff
|
|
#define I2C_TIMING2_LEADIN_COUNT_OFFSET 0
|
|
|
|
#define I2C_CTRL1_RD_QUEUE_IRQ (1 << 30)
|
|
#define I2C_CTRL1_WR_QUEUE_IRQ (1 << 29)
|
|
#define I2C_CTRL1_CLR_GOT_A_NAK (1 << 28)
|
|
#define I2C_CTRL1_ACK_MODE (1 << 27)
|
|
#define I2C_CTRL1_FORCE_DATA_IDLE (1 << 26)
|
|
#define I2C_CTRL1_FORCE_CLK_IDLE (1 << 25)
|
|
#define I2C_CTRL1_BCAST_SLAVE_EN (1 << 24)
|
|
#define I2C_CTRL1_SLAVE_ADDRESS_BYTE_MASK (0xff << 16)
|
|
#define I2C_CTRL1_SLAVE_ADDRESS_BYTE_OFFSET 16
|
|
#define I2C_CTRL1_BUS_FREE_IRQ_EN (1 << 15)
|
|
#define I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ_EN (1 << 14)
|
|
#define I2C_CTRL1_NO_SLAVE_ACK_IRQ_EN (1 << 13)
|
|
#define I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ_EN (1 << 12)
|
|
#define I2C_CTRL1_EARLY_TERM_IRQ_EN (1 << 11)
|
|
#define I2C_CTRL1_MASTER_LOSS_IRQ_EN (1 << 10)
|
|
#define I2C_CTRL1_SLAVE_STOP_IRQ_EN (1 << 9)
|
|
#define I2C_CTRL1_SLAVE_IRQ_EN (1 << 8)
|
|
#define I2C_CTRL1_BUS_FREE_IRQ (1 << 7)
|
|
#define I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ (1 << 6)
|
|
#define I2C_CTRL1_NO_SLAVE_ACK_IRQ (1 << 5)
|
|
#define I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ (1 << 4)
|
|
#define I2C_CTRL1_EARLY_TERM_IRQ (1 << 3)
|
|
#define I2C_CTRL1_MASTER_LOSS_IRQ (1 << 2)
|
|
#define I2C_CTRL1_SLAVE_STOP_IRQ (1 << 1)
|
|
#define I2C_CTRL1_SLAVE_IRQ (1 << 0)
|
|
|
|
#define I2C_STAT_MASTER_PRESENT (1 << 31)
|
|
#define I2C_STAT_SLAVE_PRESENT (1 << 30)
|
|
#define I2C_STAT_ANY_ENABLED_IRQ (1 << 29)
|
|
#define I2C_STAT_GOT_A_NAK (1 << 28)
|
|
#define I2C_STAT_RCVD_SLAVE_ADDR_MASK (0xff << 16)
|
|
#define I2C_STAT_RCVD_SLAVE_ADDR_OFFSET 16
|
|
#define I2C_STAT_SLAVE_ADDR_EQ_ZERO (1 << 15)
|
|
#define I2C_STAT_SLAVE_FOUND (1 << 14)
|
|
#define I2C_STAT_SLAVE_SEARCHING (1 << 13)
|
|
#define I2C_STAT_DATA_ENGING_DMA_WAIT (1 << 12)
|
|
#define I2C_STAT_BUS_BUSY (1 << 11)
|
|
#define I2C_STAT_CLK_GEN_BUSY (1 << 10)
|
|
#define I2C_STAT_DATA_ENGINE_BUSY (1 << 9)
|
|
#define I2C_STAT_SLAVE_BUSY (1 << 8)
|
|
#define I2C_STAT_BUS_FREE_IRQ_SUMMARY (1 << 7)
|
|
#define I2C_STAT_DATA_ENGINE_CMPLT_IRQ_SUMMARY (1 << 6)
|
|
#define I2C_STAT_NO_SLAVE_ACK_IRQ_SUMMARY (1 << 5)
|
|
#define I2C_STAT_OVERSIZE_XFER_TERM_IRQ_SUMMARY (1 << 4)
|
|
#define I2C_STAT_EARLY_TERM_IRQ_SUMMARY (1 << 3)
|
|
#define I2C_STAT_MASTER_LOSS_IRQ_SUMMARY (1 << 2)
|
|
#define I2C_STAT_SLAVE_STOP_IRQ_SUMMARY (1 << 1)
|
|
#define I2C_STAT_SLAVE_IRQ_SUMMARY (1 << 0)
|
|
|
|
#define I2C_QUEUECTRL_RD_THRESH_MASK (0x1f << 16)
|
|
#define I2C_QUEUECTRL_RD_THRESH_OFFSET 16
|
|
#define I2C_QUEUECTRL_WR_THRESH_MASK (0x1f << 8)
|
|
#define I2C_QUEUECTRL_WR_THRESH_OFFSET 8
|
|
#define I2C_QUEUECTRL_QUEUE_RUN (1 << 5)
|
|
#define I2C_QUEUECTRL_RD_CLEAR (1 << 4)
|
|
#define I2C_QUEUECTRL_WR_CLEAR (1 << 3)
|
|
#define I2C_QUEUECTRL_PIO_QUEUE_MODE (1 << 2)
|
|
#define I2C_QUEUECTRL_RD_QUEUE_IRQ_EN (1 << 1)
|
|
#define I2C_QUEUECTRL_WR_QUEUE_IRQ_EN (1 << 0)
|
|
|
|
#define I2C_QUEUESTAT_RD_QUEUE_FULL (1 << 14)
|
|
#define I2C_QUEUESTAT_RD_QUEUE_EMPTY (1 << 13)
|
|
#define I2C_QUEUESTAT_RD_QUEUE_CNT_MASK (0x1f << 8)
|
|
#define I2C_QUEUESTAT_RD_QUEUE_CNT_OFFSET 8
|
|
#define I2C_QUEUESTAT_WR_QUEUE_FULL (1 << 6)
|
|
#define I2C_QUEUESTAT_WR_QUEUE_EMPTY (1 << 5)
|
|
#define I2C_QUEUESTAT_WR_QUEUE_CNT_MASK 0x1f
|
|
#define I2C_QUEUESTAT_WR_QUEUE_CNT_OFFSET 0
|
|
|
|
#define I2C_QUEUECMD_PREACK (1 << 27)
|
|
#define I2C_QUEUECMD_ACKNOWLEDGE (1 << 26)
|
|
#define I2C_QUEUECMD_SEND_NAK_ON_LAST (1 << 25)
|
|
#define I2C_QUEUECMD_MULTI_MASTER (1 << 23)
|
|
#define I2C_QUEUECMD_CLOCK_HELD (1 << 22)
|
|
#define I2C_QUEUECMD_RETAIN_CLOCK (1 << 21)
|
|
#define I2C_QUEUECMD_POST_SEND_STOP (1 << 20)
|
|
#define I2C_QUEUECMD_PRE_SEND_START (1 << 19)
|
|
#define I2C_QUEUECMD_SLAVE_ADDRESS_ENABLE (1 << 18)
|
|
#define I2C_QUEUECMD_MASTER_MODE (1 << 17)
|
|
#define I2C_QUEUECMD_DIRECTION (1 << 16)
|
|
#define I2C_QUEUECMD_XFER_COUNT_MASK 0xffff
|
|
#define I2C_QUEUECMD_XFER_COUNT_OFFSET 0
|
|
|
|
#define I2C_QUEUEDATA_DATA_MASK 0xffffffff
|
|
#define I2C_QUEUEDATA_DATA_OFFSET 0
|
|
|
|
#define I2C_DATA_DATA_MASK 0xffffffff
|
|
#define I2C_DATA_DATA_OFFSET 0
|
|
|
|
#define I2C_DEBUG0_DMAREQ (1 << 31)
|
|
#define I2C_DEBUG0_DMAENDCMD (1 << 30)
|
|
#define I2C_DEBUG0_DMAKICK (1 << 29)
|
|
#define I2C_DEBUG0_DMATERMINATE (1 << 28)
|
|
#define I2C_DEBUG0_STATE_VALUE_MASK (0x3 << 26)
|
|
#define I2C_DEBUG0_STATE_VALUE_OFFSET 26
|
|
#define I2C_DEBUG0_DMA_STATE_MASK (0x3ff << 16)
|
|
#define I2C_DEBUG0_DMA_STATE_OFFSET 16
|
|
#define I2C_DEBUG0_START_TOGGLE (1 << 15)
|
|
#define I2C_DEBUG0_STOP_TOGGLE (1 << 14)
|
|
#define I2C_DEBUG0_GRAB_TOGGLE (1 << 13)
|
|
#define I2C_DEBUG0_CHANGE_TOGGLE (1 << 12)
|
|
#define I2C_DEBUG0_STATE_LATCH (1 << 11)
|
|
#define I2C_DEBUG0_SLAVE_HOLD_CLK (1 << 10)
|
|
#define I2C_DEBUG0_STATE_STATE_MASK 0x3ff
|
|
#define I2C_DEBUG0_STATE_STATE_OFFSET 0
|
|
|
|
#define I2C_DEBUG1_I2C_CLK_IN (1 << 31)
|
|
#define I2C_DEBUG1_I2C_DATA_IN (1 << 30)
|
|
#define I2C_DEBUG1_DMA_BYTE_ENABLES_MASK (0xf << 24)
|
|
#define I2C_DEBUG1_DMA_BYTE_ENABLES_OFFSET 24
|
|
#define I2C_DEBUG1_CLK_GEN_STATE_MASK (0xff << 16)
|
|
#define I2C_DEBUG1_CLK_GEN_STATE_OFFSET 16
|
|
#define I2C_DEBUG1_LST_MODE_MASK (0x3 << 9)
|
|
#define I2C_DEBUG1_LST_MODE_OFFSET 9
|
|
#define I2C_DEBUG1_LOCAL_SLAVE_TEST (1 << 8)
|
|
#define I2C_DEBUG1_FORCE_CLK_ON (1 << 4)
|
|
#define I2C_DEBUG1_FORCE_ABR_LOSS (1 << 3)
|
|
#define I2C_DEBUG1_FORCE_RCV_ACK (1 << 2)
|
|
#define I2C_DEBUG1_FORCE_I2C_DATA_OE (1 << 1)
|
|
#define I2C_DEBUG1_FORCE_I2C_CLK_OE (1 << 0)
|
|
|
|
#define I2C_VERSION_MAJOR_MASK (0xff << 24)
|
|
#define I2C_VERSION_MAJOR_OFFSET 24
|
|
#define I2C_VERSION_MINOR_MASK (0xff << 16)
|
|
#define I2C_VERSION_MINOR_OFFSET 16
|
|
#define I2C_VERSION_STEP_MASK 0xffff
|
|
#define I2C_VERSION_STEP_OFFSET 0
|
|
|
|
#endif /* __MX28_REGS_I2C_H__ */
|