u-boot/cpu/arm926ejs/davinci/dp83848.c
Sergey Kubushyn c74b2108e3 [ARM] TI DaVinci support, hopefully final
Add support for the following DaVinci boards:
- DV_EVM
- SCHMOOGIE
- SONATA

Changes:

- Split into separate board directories
- Removed changes to MTD_DEBUG (or whatever it's called)
- New CONFIG_CMD party line followed
- Some cosmetic fixes, cleanup etc.
- Patches against the latest U-Boot tree as of now.
- Fixed CONFIG_CMD_NET in net files.
- Fixed CONFIG_CMD_EEPROM for schmoogie.
- Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
   DV_EVM. Can't check if it works on SONATA, don't have a board any more,
   but it at least compiles.

Here is an excerpt from session log on SCHMOOGIE...

U-Boot 1.2.0-g6c33c785-dirty (Aug  7 2007 - 13:07:17)

DRAM:  128 MB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
ARM Clock : 297MHz
DDR Clock : 162MHz
ETH PHY   : DP83848 @ 0x01
U-Boot > iprobe
Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
U-Boot > ping 192.168.253.10
host 192.168.253.10 is alive
U-Boot >

Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
Acked-by: Dirk Behme <dirk.behme@gmail.com>
Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
Acked-by: Stefan Roese <sr@denx.de>
2007-08-10 20:26:18 +02:00

156 lines
4 KiB
C

/*
* National Semiconductor DP83848 PHY Driver for TI DaVinci
* (TMS320DM644x) based boards.
*
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
*
* --------------------------------------------------------
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <net.h>
#include <dp83848.h>
#include <asm/arch/emac_defs.h>
#ifdef CONFIG_DRIVER_TI_EMAC
#ifdef CONFIG_CMD_NET
int dp83848_is_phy_connected(int phy_addr)
{
u_int16_t id1, id2;
if (!dm644x_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1))
return(0);
if (!dm644x_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2))
return(0);
if ((id1 == DP83848_PHYID1_OUI) && (id2 == DP83848_PHYID2_OUI))
return(1);
return(0);
}
int dp83848_get_link_speed(int phy_addr)
{
u_int16_t tmp;
volatile emac_regs* emac = (emac_regs *)EMAC_BASE_ADDR;
if (!dm644x_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
return(0);
if (!(tmp & DP83848_LINK_STATUS)) /* link up? */
return(0);
if (!dm644x_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp))
return(0);
/* Speed doesn't matter, there is no setting for it in EMAC... */
if (tmp & DP83848_SPEED) {
if (tmp & DP83848_DUPLEX) {
/* set DM644x EMAC for Full Duplex */
emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
} else {
/*set DM644x EMAC for Half Duplex */
emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
}
return(1);
} else {
if (tmp & DP83848_DUPLEX) {
/* set DM644x EMAC for Full Duplex */
emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
} else {
/*set DM644x EMAC for Half Duplex */
emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
}
return(1);
}
return(0);
}
int dp83848_init_phy(int phy_addr)
{
int ret = 1;
if (!dp83848_get_link_speed(phy_addr)) {
/* Try another time */
udelay(100000);
ret = dp83848_get_link_speed(phy_addr);
}
/* Disable PHY Interrupts */
dm644x_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0);
return(ret);
}
int dp83848_auto_negotiate(int phy_addr)
{
u_int16_t tmp;
if (!dm644x_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
return(0);
/* Restart Auto_negotiation */
tmp &= ~DP83848_AUTONEG; /* remove autonegotiation enable */
tmp |= DP83848_ISOLATE; /* Electrically isolate PHY */
dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
/* Set the Auto_negotiation Advertisement Register
* MII advertising for Next page, 100BaseTxFD and HD,
* 10BaseTFD and HD, IEEE 802.3
*/
tmp = DP83848_NP | DP83848_TX_FDX | DP83848_TX_HDX |
DP83848_10_FDX | DP83848_10_HDX | DP83848_AN_IEEE_802_3;
dm644x_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp);
/* Read Control Register */
if (!dm644x_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
return(0);
tmp |= DP83848_SPEED_SELECT | DP83848_AUTONEG | DP83848_DUPLEX_MODE;
dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
/* Restart Auto_negotiation */
tmp |= DP83848_RESTART_AUTONEG;
dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
/*check AutoNegotiate complete */
udelay(10000);
if (!dm644x_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
return(0);
if (!(tmp & DP83848_AUTONEG_COMP))
return(0);
return (dp83848_get_link_speed(phy_addr));
}
#endif /* CONFIG_CMD_NET */
#endif /* CONFIG_DRIVER_ETHER */