u-boot/board/ti/am65x/evm.c
Lokesh Vutla bd8f138f5a board: am65x: Print board name and version during boot
Print the board name and ver along with the DT Model.
While at it print the ver for all the detected daughter cards.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 13:31:18 -04:00

348 lines
8 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Board specific initialization for AM654 EVM
*
* Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/
* Lokesh Vutla <lokeshvutla@ti.com>
*
*/
#include <common.h>
#include <dm.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/hardware.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/omap_common.h>
#include <env.h>
#include <spl.h>
#include <asm/arch/sys_proto.h>
#include "../common/board_detect.h"
#define board_is_am65x_base_board() board_ti_is("AM6-COMPROCEVM")
/* Daughter card presence detection signals */
enum {
AM65X_EVM_APP_BRD_DET,
AM65X_EVM_LCD_BRD_DET,
AM65X_EVM_SERDES_BRD_DET,
AM65X_EVM_HDMI_GPMC_BRD_DET,
AM65X_EVM_BRD_DET_COUNT,
};
/* Max number of MAC addresses that are parsed/processed per daughter card */
#define DAUGHTER_CARD_NO_OF_MAC_ADDR 8
DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
return 0;
}
int dram_init(void)
{
#ifdef CONFIG_PHYS_64BIT
gd->ram_size = 0x100000000;
#else
gd->ram_size = 0x80000000;
#endif
return 0;
}
ulong board_get_usable_ram_top(ulong total_size)
{
#ifdef CONFIG_PHYS_64BIT
/* Limit RAM used by U-Boot to the DDR low region */
if (gd->ram_top > 0x100000000)
return 0x100000000;
#endif
return gd->ram_top;
}
int dram_init_banksize(void)
{
/* Bank 0 declares the memory available in the DDR low region */
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_dram[0].size = 0x80000000;
#ifdef CONFIG_PHYS_64BIT
/* Bank 1 declares the memory available in the DDR high region */
gd->bd->bi_dram[1].start = CONFIG_SYS_SDRAM_BASE1;
gd->bd->bi_dram[1].size = 0x80000000;
#endif
return 0;
}
#ifdef CONFIG_SPL_LOAD_FIT
int board_fit_config_name_match(const char *name)
{
#ifdef CONFIG_TARGET_AM654_A53_EVM
if (!strcmp(name, "k3-am654-base-board"))
return 0;
#endif
return -1;
}
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, bd_t *bd)
{
int ret;
ret = fdt_fixup_msmc_ram(blob, "/interconnect@100000", "sram@70000000");
if (ret) {
printf("%s: fixing up msmc ram failed %d\n", __func__, ret);
return ret;
}
#if defined(CONFIG_TI_SECURE_DEVICE)
/* Make HW RNG reserved for secure world use */
ret = fdt_disable_node(blob, "/interconnect@100000/trng@4e10000");
if (ret) {
printf("%s: disabling TRGN failed %d\n", __func__, ret);
return ret;
}
#endif
return 0;
}
#endif
int do_board_detect(void)
{
int ret;
ret = ti_i2c_eeprom_am6_get_base(CONFIG_EEPROM_BUS_ADDRESS,
CONFIG_EEPROM_CHIP_ADDRESS);
if (ret)
pr_err("Reading on-board EEPROM at 0x%02x failed %d\n",
CONFIG_EEPROM_CHIP_ADDRESS, ret);
return ret;
}
int checkboard(void)
{
struct ti_am6_eeprom *ep = TI_AM6_EEPROM_DATA;
if (do_board_detect())
/* EEPROM not populated */
printf("Board: %s rev %s\n", "AM6-COMPROCEVM", "E3");
else
printf("Board: %s rev %s\n", ep->name, ep->version);
return 0;
}
static void setup_board_eeprom_env(void)
{
char *name = "am65x";
if (do_board_detect())
goto invalid_eeprom;
if (board_is_am65x_base_board())
name = "am65x";
else
printf("Unidentified board claims %s in eeprom header\n",
board_ti_get_name());
invalid_eeprom:
set_board_info_env_am6(name);
}
static int init_daughtercard_det_gpio(char *gpio_name, struct gpio_desc *desc)
{
int ret;
memset(desc, 0, sizeof(*desc));
ret = dm_gpio_lookup_name(gpio_name, desc);
if (ret < 0)
return ret;
/* Request GPIO, simply re-using the name as label */
ret = dm_gpio_request(desc, gpio_name);
if (ret < 0)
return ret;
return dm_gpio_set_dir_flags(desc, GPIOD_IS_IN);
}
static int probe_daughtercards(void)
{
struct ti_am6_eeprom ep;
struct gpio_desc board_det_gpios[AM65X_EVM_BRD_DET_COUNT];
char mac_addr[DAUGHTER_CARD_NO_OF_MAC_ADDR][TI_EEPROM_HDR_ETH_ALEN];
u8 mac_addr_cnt;
char name_overlays[1024] = { 0 };
int i, j;
int ret;
/*
* Daughter card presence detection signal name to GPIO (via I2C I/O
* expander @ address 0x38) name and EEPROM I2C address mapping.
*/
const struct {
char *gpio_name;
u8 i2c_addr;
} slot_map[AM65X_EVM_BRD_DET_COUNT] = {
{ "gpio@38_0", 0x52, }, /* AM65X_EVM_APP_BRD_DET */
{ "gpio@38_1", 0x55, }, /* AM65X_EVM_LCD_BRD_DET */
{ "gpio@38_2", 0x54, }, /* AM65X_EVM_SERDES_BRD_DET */
{ "gpio@38_3", 0x53, }, /* AM65X_EVM_HDMI_GPMC_BRD_DET */
};
/* Declaration of daughtercards to probe */
const struct {
u8 slot_index; /* Slot the card is installed */
char *card_name; /* EEPROM-programmed card name */
char *dtbo_name; /* Device tree overlay to apply */
u8 eth_offset; /* ethXaddr MAC address index offset */
} cards[] = {
{
AM65X_EVM_APP_BRD_DET,
"AM6-GPAPPEVM",
"k3-am654-gp.dtbo",
0,
},
{
AM65X_EVM_APP_BRD_DET,
"AM6-IDKAPPEVM",
"k3-am654-idk.dtbo",
3,
},
{
AM65X_EVM_SERDES_BRD_DET,
"SER-PCIE2LEVM",
"k3-am654-pcie-usb2.dtbo",
0,
},
{
AM65X_EVM_SERDES_BRD_DET,
"SER-PCIEUSBEVM",
"k3-am654-pcie-usb3.dtbo",
0,
},
{
AM65X_EVM_LCD_BRD_DET,
"OLDI-LCD1EVM",
"k3-am654-evm-oldi-lcd1evm.dtbo",
0,
},
};
/*
* Initialize GPIO used for daughtercard slot presence detection and
* keep the resulting handles in local array for easier access.
*/
for (i = 0; i < AM65X_EVM_BRD_DET_COUNT; i++) {
ret = init_daughtercard_det_gpio(slot_map[i].gpio_name,
&board_det_gpios[i]);
if (ret < 0)
return ret;
}
for (i = 0; i < ARRAY_SIZE(cards); i++) {
/* Obtain card-specific slot index and associated I2C address */
u8 slot_index = cards[i].slot_index;
u8 i2c_addr = slot_map[slot_index].i2c_addr;
/*
* The presence detection signal is active-low, hence skip
* over this card slot if anything other than 0 is returned.
*/
ret = dm_gpio_get_value(&board_det_gpios[slot_index]);
if (ret < 0)
return ret;
else if (ret)
continue;
/* Get and parse the daughter card EEPROM record */
ret = ti_i2c_eeprom_am6_get(CONFIG_EEPROM_BUS_ADDRESS, i2c_addr,
&ep,
(char **)mac_addr,
DAUGHTER_CARD_NO_OF_MAC_ADDR,
&mac_addr_cnt);
if (ret) {
pr_err("Reading daughtercard EEPROM at 0x%02x failed %d\n",
i2c_addr, ret);
/*
* Even this is pretty serious let's just skip over
* this particular daughtercard, rather than ending
* the probing process altogether.
*/
continue;
}
/* Only process the parsed data if we found a match */
if (strncmp(ep.name, cards[i].card_name, sizeof(ep.name)))
continue;
printf("Detected: %s rev %s\n", ep.name, ep.version);
/*
* Populate any MAC addresses from daughtercard into the U-Boot
* environment, starting with a card-specific offset so we can
* have multiple cards contribute to the MAC pool in a well-
* defined manner.
*/
for (j = 0; j < mac_addr_cnt; j++) {
if (!is_valid_ethaddr((u8 *)mac_addr[j]))
continue;
eth_env_set_enetaddr_by_index("eth",
cards[i].eth_offset + j,
(uchar *)mac_addr[j]);
}
/* Skip if no overlays are to be added */
if (!strlen(cards[i].dtbo_name))
continue;
/*
* Make sure we are not running out of buffer space by checking
* if we can fit the new overlay, a trailing space to be used
* as a separator, plus the terminating zero.
*/
if (strlen(name_overlays) + strlen(cards[i].dtbo_name) + 2 >
sizeof(name_overlays))
return -ENOMEM;
/* Append to our list of overlays */
strcat(name_overlays, cards[i].dtbo_name);
strcat(name_overlays, " ");
}
/* Apply device tree overlay(s) to the U-Boot environment, if any */
if (strlen(name_overlays))
return env_set("name_overlays", name_overlays);
return 0;
}
int board_late_init(void)
{
struct ti_am6_eeprom *ep = TI_AM6_EEPROM_DATA;
setup_board_eeprom_env();
/*
* The first MAC address for ethernet a.k.a. ethernet0 comes from
* efuse populated via the am654 gigabit eth switch subsystem driver.
* All the other ones are populated via EEPROM, hence continue with
* an index of 1.
*/
board_ti_am6_set_ethaddr(1, ep->mac_addr_cnt);
/* Check for and probe any plugged-in daughtercards */
probe_daughtercards();
return 0;
}