u-boot/configs/libretech-ac_defconfig
Anatolij Gustschin 2cc393f32f video: make BPP and ANSI configs optional
Many boards do not use all selected framebuffer depth
configurations, for such boards there is some unused
code in video and console uclass routines. Make depth
specific code optional to avoid dead code and slightly
reduce binary size. Also make ANSI code optional for
the same reason. When i.e. using only VIDEO_BPP16 the
code size shrinks (below values when using gcc-7.3.0):

  $ ./tools/buildman/buildman -b video-wip -sS wandboard
  ...
  01: Merge git://git.denx.de/u-boot-sh
  02: video: add guards around 16bpp/32bbp code
  03: video: make BPP and ANSI configs optional
         arm: (for 1/1 boards) all -776.0 bss -8.0 text -768.0

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Eugen Hristev <eugen.hristev@microchip.com>
Tested-by: Patrice Chotard <patrice.chotard@st.com>
Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
2019-12-06 16:38:51 +01:00

77 lines
1.8 KiB
Text

CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="libretech-ac"
CONFIG_ARCH_MESON=y
CONFIG_SYS_TEXT_BASE=0x01000000
CONFIG_MESON_GXL=y
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xFFFF0000
CONFIG_NR_DRAM_BANKS=1
CONFIG_DEBUG_UART_BASE=0xc81004c0
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_IDENT_STRING=" libretech-ac"
CONFIG_DEBUG_UART=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="usb start"
CONFIG_MISC_INIT_R=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set
CONFIG_CMD_ADC=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_SF_TEST=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_REGULATOR=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s805x-libretech-ac"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SARADC_MESON=y
CONFIG_DM_GPIO=y
CONFIG_DM_MMC=y
CONFIG_MMC_MESON_GX=y
CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHY_ADDR=8
CONFIG_PHY_MESON_GXL=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_PHY=y
CONFIG_MESON_GXL_USB_PHY=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_GXL=y
CONFIG_POWER_DOMAIN=y
CONFIG_MESON_GX_VPU_POWER_DOMAIN=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_RESET=y
CONFIG_DEBUG_UART_MESON=y
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_DEBUG_UART_SKIP_INIT=y
CONFIG_MESON_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MESON_SPIFC=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
CONFIG_USB_DWC3=y
CONFIG_USB_KEYBOARD=y
CONFIG_DM_VIDEO=y
CONFIG_VIDEO_BPP32=y
CONFIG_SYS_WHITE_ON_BLACK=y
CONFIG_VIDEO_MESON=y
CONFIG_VIDEO_DT_SIMPLEFB=y
CONFIG_OF_LIBFDT_OVERLAY=y