mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 18:41:03 +00:00
e174bd74c9
Malta boards may be used with cores which support L2 caches, however U-boot does not yet support L2 cache for MIPS. Thus for the moment we'll disable L2 caches by setting the L2B bit in Config2. This is specific to MTI/Imagination MIPS cores which is why this is done for the Malta board rather than generically. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
238 lines
6.3 KiB
ArmAsm
238 lines
6.3 KiB
ArmAsm
/*
|
|
* Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <gt64120.h>
|
|
#include <msc01.h>
|
|
#include <pci.h>
|
|
|
|
#include <asm/addrspace.h>
|
|
#include <asm/regdef.h>
|
|
#include <asm/malta.h>
|
|
#include <asm/mipsregs.h>
|
|
|
|
#ifdef CONFIG_SYS_BIG_ENDIAN
|
|
#define CPU_TO_GT32(_x) ((_x))
|
|
#else
|
|
#define CPU_TO_GT32(_x) ( \
|
|
(((_x) & 0xff) << 24) | (((_x) & 0xff00) << 8) | \
|
|
(((_x) & 0xff0000) >> 8) | (((_x) & 0xff000000) >> 24))
|
|
#endif
|
|
|
|
.text
|
|
.set noreorder
|
|
.set mips32
|
|
|
|
.globl lowlevel_init
|
|
lowlevel_init:
|
|
/* disable any L2 cache for now */
|
|
sync
|
|
mfc0 t0, CP0_CONFIG, 2
|
|
ori t0, t0, 0x1 << 12
|
|
mtc0 t0, CP0_CONFIG, 2
|
|
|
|
/* detect the core card */
|
|
li t0, KSEG1ADDR(MALTA_REVISION)
|
|
lw t0, 0(t0)
|
|
srl t0, t0, MALTA_REVISION_CORID_SHF
|
|
andi t0, t0, (MALTA_REVISION_CORID_MSK >> \
|
|
MALTA_REVISION_CORID_SHF)
|
|
|
|
/* core cards using the gt64120 system controller */
|
|
li t1, MALTA_REVISION_CORID_CORE_LV
|
|
beq t0, t1, _gt64120
|
|
|
|
/* core cards using the MSC01 system controller */
|
|
li t1, MALTA_REVISION_CORID_CORE_FPGA6
|
|
beq t0, t1, _msc01
|
|
nop
|
|
|
|
/* unknown system controller */
|
|
b .
|
|
nop
|
|
|
|
/*
|
|
* Load BAR registers of GT64120 as done by YAMON
|
|
*
|
|
* based on a patch sent by Antony Pavlov <antonynpavlov@gmail.com>
|
|
* to the barebox mailing list.
|
|
* The subject of the original patch:
|
|
* 'MIPS: qemu-malta: add YAMON-style GT64120 memory map'
|
|
* URL:
|
|
* http://www.mail-archive.com/barebox@lists.infradead.org/msg06128.html
|
|
*
|
|
* based on write_bootloader() in qemu.git/hw/mips_malta.c
|
|
* see GT64120 manual and qemu.git/hw/gt64xxx.c for details
|
|
*/
|
|
_gt64120:
|
|
/* move GT64120 registers from 0x14000000 to 0x1be00000 */
|
|
li t1, KSEG1ADDR(GT_DEF_BASE)
|
|
li t0, CPU_TO_GT32(0xdf000000)
|
|
sw t0, GT_ISD_OFS(t1)
|
|
|
|
/* setup MEM-to-PCI0 mapping */
|
|
li t1, KSEG1ADDR(MALTA_GT_BASE)
|
|
|
|
/* setup PCI0 io window to 0x18000000-0x181fffff */
|
|
li t0, CPU_TO_GT32(0xc0000000)
|
|
sw t0, GT_PCI0IOLD_OFS(t1)
|
|
li t0, CPU_TO_GT32(0x40000000)
|
|
sw t0, GT_PCI0IOHD_OFS(t1)
|
|
|
|
/* setup PCI0 mem windows */
|
|
li t0, CPU_TO_GT32(0x80000000)
|
|
sw t0, GT_PCI0M0LD_OFS(t1)
|
|
li t0, CPU_TO_GT32(0x3f000000)
|
|
sw t0, GT_PCI0M0HD_OFS(t1)
|
|
|
|
li t0, CPU_TO_GT32(0xc1000000)
|
|
sw t0, GT_PCI0M1LD_OFS(t1)
|
|
li t0, CPU_TO_GT32(0x5e000000)
|
|
sw t0, GT_PCI0M1HD_OFS(t1)
|
|
|
|
jr ra
|
|
nop
|
|
|
|
/*
|
|
*
|
|
*/
|
|
_msc01:
|
|
/* setup peripheral bus controller clock divide */
|
|
li t0, KSEG1ADDR(MALTA_MSC01_PBC_BASE)
|
|
li t1, 0x1 << MSC01_PBC_CLKCFG_SHF
|
|
sw t1, MSC01_PBC_CLKCFG_OFS(t0)
|
|
|
|
/* tweak peripheral bus controller timings */
|
|
li t1, (0x1 << MSC01_PBC_CS0TIM_CDT_SHF) | \
|
|
(0x1 << MSC01_PBC_CS0TIM_CAT_SHF)
|
|
sw t1, MSC01_PBC_CS0TIM_OFS(t0)
|
|
li t1, (0x0 << MSC01_PBC_CS0RW_RDT_SHF) | \
|
|
(0x2 << MSC01_PBC_CS0RW_RAT_SHF) | \
|
|
(0x0 << MSC01_PBC_CS0RW_WDT_SHF) | \
|
|
(0x2 << MSC01_PBC_CS0RW_WAT_SHF)
|
|
sw t1, MSC01_PBC_CS0RW_OFS(t0)
|
|
lw t1, MSC01_PBC_CS0CFG_OFS(t0)
|
|
li t2, MSC01_PBC_CS0CFG_DTYP_MSK
|
|
and t1, t2
|
|
ori t1, (0x0 << MSC01_PBC_CS0CFG_ADM_SHF) | \
|
|
(0x3 << MSC01_PBC_CS0CFG_WSIDLE_SHF) | \
|
|
(0x10 << MSC01_PBC_CS0CFG_WS_SHF)
|
|
sw t1, MSC01_PBC_CS0CFG_OFS(t0)
|
|
|
|
/* setup basic address decode */
|
|
li t0, KSEG1ADDR(MALTA_MSC01_BIU_BASE)
|
|
li t1, 0x0
|
|
li t2, -CONFIG_SYS_MEM_SIZE
|
|
sw t1, MSC01_BIU_MCBAS1L_OFS(t0)
|
|
sw t2, MSC01_BIU_MCMSK1L_OFS(t0)
|
|
sw t1, MSC01_BIU_MCBAS2L_OFS(t0)
|
|
sw t2, MSC01_BIU_MCMSK2L_OFS(t0)
|
|
|
|
/* initialise IP1 - unused */
|
|
li t1, MALTA_MSC01_IP1_BASE
|
|
li t2, -MALTA_MSC01_IP1_SIZE
|
|
sw t1, MSC01_BIU_IP1BAS1L_OFS(t0)
|
|
sw t2, MSC01_BIU_IP1MSK1L_OFS(t0)
|
|
sw t1, MSC01_BIU_IP1BAS2L_OFS(t0)
|
|
sw t2, MSC01_BIU_IP1MSK2L_OFS(t0)
|
|
|
|
/* initialise IP2 - PCI */
|
|
li t1, MALTA_MSC01_IP2_BASE1
|
|
li t2, -MALTA_MSC01_IP2_SIZE1
|
|
sw t1, MSC01_BIU_IP2BAS1L_OFS(t0)
|
|
sw t2, MSC01_BIU_IP2MSK1L_OFS(t0)
|
|
li t1, MALTA_MSC01_IP2_BASE2
|
|
li t2, -MALTA_MSC01_IP2_SIZE2
|
|
sw t1, MSC01_BIU_IP2BAS2L_OFS(t0)
|
|
sw t2, MSC01_BIU_IP2MSK2L_OFS(t0)
|
|
|
|
/* initialise IP3 - peripheral bus controller */
|
|
li t1, MALTA_MSC01_IP3_BASE
|
|
li t2, -MALTA_MSC01_IP3_SIZE
|
|
sw t1, MSC01_BIU_IP3BAS1L_OFS(t0)
|
|
sw t2, MSC01_BIU_IP3MSK1L_OFS(t0)
|
|
sw t1, MSC01_BIU_IP3BAS2L_OFS(t0)
|
|
sw t2, MSC01_BIU_IP3MSK2L_OFS(t0)
|
|
|
|
/* setup PCI memory */
|
|
li t0, KSEG1ADDR(MALTA_MSC01_PCI_BASE)
|
|
li t1, MALTA_MSC01_PCIMEM_BASE
|
|
li t2, (-MALTA_MSC01_PCIMEM_SIZE) & MSC01_PCI_SC2PMMSKL_MSK_MSK
|
|
li t3, MALTA_MSC01_PCIMEM_MAP
|
|
sw t1, MSC01_PCI_SC2PMBASL_OFS(t0)
|
|
sw t2, MSC01_PCI_SC2PMMSKL_OFS(t0)
|
|
sw t3, MSC01_PCI_SC2PMMAPL_OFS(t0)
|
|
|
|
/* setup PCI I/O */
|
|
li t1, MALTA_MSC01_PCIIO_BASE
|
|
li t2, (-MALTA_MSC01_PCIIO_SIZE) & MSC01_PCI_SC2PIOMSKL_MSK_MSK
|
|
li t3, MALTA_MSC01_PCIIO_MAP
|
|
sw t1, MSC01_PCI_SC2PIOBASL_OFS(t0)
|
|
sw t2, MSC01_PCI_SC2PIOMSKL_OFS(t0)
|
|
sw t3, MSC01_PCI_SC2PIOMAPL_OFS(t0)
|
|
|
|
/* setup PCI_BAR0 memory window */
|
|
li t1, -CONFIG_SYS_MEM_SIZE
|
|
sw t1, MSC01_PCI_BAR0_OFS(t0)
|
|
|
|
/* setup PCI to SysCon/CPU translation */
|
|
sw t1, MSC01_PCI_P2SCMSKL_OFS(t0)
|
|
sw zero, MSC01_PCI_P2SCMAPL_OFS(t0)
|
|
|
|
/* setup PCI vendor & device IDs */
|
|
li t1, (PCI_VENDOR_ID_MIPS << MSC01_PCI_HEAD0_VENDORID_SHF) | \
|
|
(PCI_DEVICE_ID_MIPS_MSC01 << MSC01_PCI_HEAD0_DEVICEID_SHF)
|
|
sw t1, MSC01_PCI_HEAD0_OFS(t0)
|
|
|
|
/* setup PCI subsystem vendor & device IDs */
|
|
sw t1, MSC01_PCI_HEAD11_OFS(t0)
|
|
|
|
/* setup PCI class, revision */
|
|
li t1, (PCI_CLASS_BRIDGE_HOST << MSC01_PCI_HEAD2_CLASS_SHF) | \
|
|
(0x1 << MSC01_PCI_HEAD2_REV_SHF)
|
|
sw t1, MSC01_PCI_HEAD2_OFS(t0)
|
|
|
|
/* ensure a sane setup */
|
|
sw zero, MSC01_PCI_HEAD3_OFS(t0)
|
|
sw zero, MSC01_PCI_HEAD4_OFS(t0)
|
|
sw zero, MSC01_PCI_HEAD5_OFS(t0)
|
|
sw zero, MSC01_PCI_HEAD6_OFS(t0)
|
|
sw zero, MSC01_PCI_HEAD7_OFS(t0)
|
|
sw zero, MSC01_PCI_HEAD8_OFS(t0)
|
|
sw zero, MSC01_PCI_HEAD9_OFS(t0)
|
|
sw zero, MSC01_PCI_HEAD10_OFS(t0)
|
|
sw zero, MSC01_PCI_HEAD12_OFS(t0)
|
|
sw zero, MSC01_PCI_HEAD13_OFS(t0)
|
|
sw zero, MSC01_PCI_HEAD14_OFS(t0)
|
|
sw zero, MSC01_PCI_HEAD15_OFS(t0)
|
|
|
|
/* setup PCI command register */
|
|
li t1, (PCI_COMMAND_FAST_BACK | \
|
|
PCI_COMMAND_SERR | \
|
|
PCI_COMMAND_PARITY | \
|
|
PCI_COMMAND_MASTER | \
|
|
PCI_COMMAND_MEMORY)
|
|
sw t1, MSC01_PCI_HEAD1_OFS(t0)
|
|
|
|
/* setup PCI byte swapping */
|
|
#ifdef CONFIG_SYS_BIG_ENDIAN
|
|
li t1, (0x1 << MSC01_PCI_SWAP_BAR0_BSWAP_SHF) | \
|
|
(0x1 << MSC01_PCI_SWAP_IO_BSWAP_SHF)
|
|
sw t1, MSC01_PCI_SWAP_OFS(t0)
|
|
#else
|
|
sw zero, MSC01_PCI_SWAP_OFS(t0)
|
|
#endif
|
|
|
|
/* enable PCI host configuration cycles */
|
|
lw t1, MSC01_PCI_CFG_OFS(t0)
|
|
li t2, MSC01_PCI_CFG_RA_MSK | \
|
|
MSC01_PCI_CFG_G_MSK | \
|
|
MSC01_PCI_CFG_EN_MSK
|
|
or t1, t1, t2
|
|
sw t1, MSC01_PCI_CFG_OFS(t0)
|
|
|
|
jr ra
|
|
nop
|