mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-06 05:04:26 +00:00
66e036bab5
ftgmac100 driver is using hard-coded PHY interface address of zero. Each board can have different PHY interface address (phy_addr). This commit modifies the driver to make use of board specific address by leveraging CONFIG_PHY_ADDR. Signed-off-by: Thirupathaiah Annapureddy <thiruan@linux.microsoft.com> Reviewed-by: Cédric Le Goater <clg@kaod.org>
619 lines
15 KiB
C
619 lines
15 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Faraday FTGMAC100 Ethernet
|
|
*
|
|
* (C) Copyright 2009 Faraday Technology
|
|
* Po-Yu Chuang <ratbert@faraday-tech.com>
|
|
*
|
|
* (C) Copyright 2010 Andes Technology
|
|
* Macpaul Lin <macpaul@andestech.com>
|
|
*
|
|
* Copyright (C) 2018, IBM Corporation.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <cpu_func.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <miiphy.h>
|
|
#include <net.h>
|
|
#include <wait_bit.h>
|
|
#include <asm/cache.h>
|
|
#include <dm/device_compat.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
|
|
#include "ftgmac100.h"
|
|
|
|
/* Min frame ethernet frame size without FCS */
|
|
#define ETH_ZLEN 60
|
|
|
|
/* Receive Buffer Size Register - HW default is 0x640 */
|
|
#define FTGMAC100_RBSR_DEFAULT 0x640
|
|
|
|
/* PKTBUFSTX/PKTBUFSRX must both be power of 2 */
|
|
#define PKTBUFSTX 4 /* must be power of 2 */
|
|
|
|
/* Timeout for transmit */
|
|
#define FTGMAC100_TX_TIMEOUT_MS 1000
|
|
|
|
/* Timeout for a mdio read/write operation */
|
|
#define FTGMAC100_MDIO_TIMEOUT_USEC 10000
|
|
|
|
/*
|
|
* MDC clock cycle threshold
|
|
*
|
|
* 20us * 100 = 2ms > (1 / 2.5Mhz) * 0x34
|
|
*/
|
|
#define MDC_CYCTHR 0x34
|
|
|
|
/*
|
|
* ftgmac100 model variants
|
|
*/
|
|
enum ftgmac100_model {
|
|
FTGMAC100_MODEL_FARADAY,
|
|
FTGMAC100_MODEL_ASPEED,
|
|
};
|
|
|
|
/**
|
|
* struct ftgmac100_data - private data for the FTGMAC100 driver
|
|
*
|
|
* @iobase: The base address of the hardware registers
|
|
* @txdes: The array of transmit descriptors
|
|
* @rxdes: The array of receive descriptors
|
|
* @tx_index: Transmit descriptor index in @txdes
|
|
* @rx_index: Receive descriptor index in @rxdes
|
|
* @phy_addr: The PHY interface address to use
|
|
* @phydev: The PHY device backing the MAC
|
|
* @bus: The mdio bus
|
|
* @phy_mode: The mode of the PHY interface (rgmii, rmii, ...)
|
|
* @max_speed: Maximum speed of Ethernet connection supported by MAC
|
|
* @clks: The bulk of clocks assigned to the device in the DT
|
|
* @rxdes0_edorr_mask: The bit number identifying the end of the RX ring buffer
|
|
* @txdes0_edotr_mask: The bit number identifying the end of the TX ring buffer
|
|
*/
|
|
struct ftgmac100_data {
|
|
struct ftgmac100 *iobase;
|
|
|
|
struct ftgmac100_txdes txdes[PKTBUFSTX] __aligned(ARCH_DMA_MINALIGN);
|
|
struct ftgmac100_rxdes rxdes[PKTBUFSRX] __aligned(ARCH_DMA_MINALIGN);
|
|
int tx_index;
|
|
int rx_index;
|
|
|
|
u32 phy_addr;
|
|
struct phy_device *phydev;
|
|
struct mii_dev *bus;
|
|
u32 phy_mode;
|
|
u32 max_speed;
|
|
|
|
struct clk_bulk clks;
|
|
|
|
/* End of RX/TX ring buffer bits. Depend on model */
|
|
u32 rxdes0_edorr_mask;
|
|
u32 txdes0_edotr_mask;
|
|
};
|
|
|
|
/*
|
|
* struct mii_bus functions
|
|
*/
|
|
static int ftgmac100_mdio_read(struct mii_dev *bus, int phy_addr, int dev_addr,
|
|
int reg_addr)
|
|
{
|
|
struct ftgmac100_data *priv = bus->priv;
|
|
struct ftgmac100 *ftgmac100 = priv->iobase;
|
|
int phycr;
|
|
int data;
|
|
int ret;
|
|
|
|
phycr = FTGMAC100_PHYCR_MDC_CYCTHR(MDC_CYCTHR) |
|
|
FTGMAC100_PHYCR_PHYAD(phy_addr) |
|
|
FTGMAC100_PHYCR_REGAD(reg_addr) |
|
|
FTGMAC100_PHYCR_MIIRD;
|
|
writel(phycr, &ftgmac100->phycr);
|
|
|
|
ret = readl_poll_timeout(&ftgmac100->phycr, phycr,
|
|
!(phycr & FTGMAC100_PHYCR_MIIRD),
|
|
FTGMAC100_MDIO_TIMEOUT_USEC);
|
|
if (ret) {
|
|
pr_err("%s: mdio read failed (phy:%d reg:%x)\n",
|
|
priv->phydev->dev->name, phy_addr, reg_addr);
|
|
return ret;
|
|
}
|
|
|
|
data = readl(&ftgmac100->phydata);
|
|
|
|
return FTGMAC100_PHYDATA_MIIRDATA(data);
|
|
}
|
|
|
|
static int ftgmac100_mdio_write(struct mii_dev *bus, int phy_addr, int dev_addr,
|
|
int reg_addr, u16 value)
|
|
{
|
|
struct ftgmac100_data *priv = bus->priv;
|
|
struct ftgmac100 *ftgmac100 = priv->iobase;
|
|
int phycr;
|
|
int data;
|
|
int ret;
|
|
|
|
phycr = FTGMAC100_PHYCR_MDC_CYCTHR(MDC_CYCTHR) |
|
|
FTGMAC100_PHYCR_PHYAD(phy_addr) |
|
|
FTGMAC100_PHYCR_REGAD(reg_addr) |
|
|
FTGMAC100_PHYCR_MIIWR;
|
|
data = FTGMAC100_PHYDATA_MIIWDATA(value);
|
|
|
|
writel(data, &ftgmac100->phydata);
|
|
writel(phycr, &ftgmac100->phycr);
|
|
|
|
ret = readl_poll_timeout(&ftgmac100->phycr, phycr,
|
|
!(phycr & FTGMAC100_PHYCR_MIIWR),
|
|
FTGMAC100_MDIO_TIMEOUT_USEC);
|
|
if (ret) {
|
|
pr_err("%s: mdio write failed (phy:%d reg:%x)\n",
|
|
priv->phydev->dev->name, phy_addr, reg_addr);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ftgmac100_mdio_init(struct udevice *dev)
|
|
{
|
|
struct ftgmac100_data *priv = dev_get_priv(dev);
|
|
struct mii_dev *bus;
|
|
int ret;
|
|
|
|
bus = mdio_alloc();
|
|
if (!bus)
|
|
return -ENOMEM;
|
|
|
|
bus->read = ftgmac100_mdio_read;
|
|
bus->write = ftgmac100_mdio_write;
|
|
bus->priv = priv;
|
|
|
|
ret = mdio_register_seq(bus, dev->seq);
|
|
if (ret) {
|
|
free(bus);
|
|
return ret;
|
|
}
|
|
|
|
priv->bus = bus;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ftgmac100_phy_adjust_link(struct ftgmac100_data *priv)
|
|
{
|
|
struct ftgmac100 *ftgmac100 = priv->iobase;
|
|
struct phy_device *phydev = priv->phydev;
|
|
u32 maccr;
|
|
|
|
if (!phydev->link) {
|
|
dev_err(phydev->dev, "No link\n");
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
/* read MAC control register and clear related bits */
|
|
maccr = readl(&ftgmac100->maccr) &
|
|
~(FTGMAC100_MACCR_GIGA_MODE |
|
|
FTGMAC100_MACCR_FAST_MODE |
|
|
FTGMAC100_MACCR_FULLDUP);
|
|
|
|
if (phy_interface_is_rgmii(phydev) && phydev->speed == 1000)
|
|
maccr |= FTGMAC100_MACCR_GIGA_MODE;
|
|
|
|
if (phydev->speed == 100)
|
|
maccr |= FTGMAC100_MACCR_FAST_MODE;
|
|
|
|
if (phydev->duplex)
|
|
maccr |= FTGMAC100_MACCR_FULLDUP;
|
|
|
|
/* update MII config into maccr */
|
|
writel(maccr, &ftgmac100->maccr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ftgmac100_phy_init(struct udevice *dev)
|
|
{
|
|
struct ftgmac100_data *priv = dev_get_priv(dev);
|
|
struct phy_device *phydev;
|
|
int ret;
|
|
|
|
phydev = phy_connect(priv->bus, priv->phy_addr, dev, priv->phy_mode);
|
|
if (!phydev)
|
|
return -ENODEV;
|
|
|
|
phydev->supported &= PHY_GBIT_FEATURES;
|
|
if (priv->max_speed) {
|
|
ret = phy_set_supported(phydev, priv->max_speed);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
phydev->advertising = phydev->supported;
|
|
priv->phydev = phydev;
|
|
phy_config(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Reset MAC
|
|
*/
|
|
static void ftgmac100_reset(struct ftgmac100_data *priv)
|
|
{
|
|
struct ftgmac100 *ftgmac100 = priv->iobase;
|
|
|
|
debug("%s()\n", __func__);
|
|
|
|
setbits_le32(&ftgmac100->maccr, FTGMAC100_MACCR_SW_RST);
|
|
|
|
while (readl(&ftgmac100->maccr) & FTGMAC100_MACCR_SW_RST)
|
|
;
|
|
}
|
|
|
|
/*
|
|
* Set MAC address
|
|
*/
|
|
static int ftgmac100_set_mac(struct ftgmac100_data *priv,
|
|
const unsigned char *mac)
|
|
{
|
|
struct ftgmac100 *ftgmac100 = priv->iobase;
|
|
unsigned int maddr = mac[0] << 8 | mac[1];
|
|
unsigned int laddr = mac[2] << 24 | mac[3] << 16 | mac[4] << 8 | mac[5];
|
|
|
|
debug("%s(%x %x)\n", __func__, maddr, laddr);
|
|
|
|
writel(maddr, &ftgmac100->mac_madr);
|
|
writel(laddr, &ftgmac100->mac_ladr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* disable transmitter, receiver
|
|
*/
|
|
static void ftgmac100_stop(struct udevice *dev)
|
|
{
|
|
struct ftgmac100_data *priv = dev_get_priv(dev);
|
|
struct ftgmac100 *ftgmac100 = priv->iobase;
|
|
|
|
debug("%s()\n", __func__);
|
|
|
|
writel(0, &ftgmac100->maccr);
|
|
|
|
phy_shutdown(priv->phydev);
|
|
}
|
|
|
|
static int ftgmac100_start(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *plat = dev_get_platdata(dev);
|
|
struct ftgmac100_data *priv = dev_get_priv(dev);
|
|
struct ftgmac100 *ftgmac100 = priv->iobase;
|
|
struct phy_device *phydev = priv->phydev;
|
|
unsigned int maccr;
|
|
ulong start, end;
|
|
int ret;
|
|
int i;
|
|
|
|
debug("%s()\n", __func__);
|
|
|
|
ftgmac100_reset(priv);
|
|
|
|
/* set the ethernet address */
|
|
ftgmac100_set_mac(priv, plat->enetaddr);
|
|
|
|
/* disable all interrupts */
|
|
writel(0, &ftgmac100->ier);
|
|
|
|
/* initialize descriptors */
|
|
priv->tx_index = 0;
|
|
priv->rx_index = 0;
|
|
|
|
for (i = 0; i < PKTBUFSTX; i++) {
|
|
priv->txdes[i].txdes3 = 0;
|
|
priv->txdes[i].txdes0 = 0;
|
|
}
|
|
priv->txdes[PKTBUFSTX - 1].txdes0 = priv->txdes0_edotr_mask;
|
|
|
|
start = ((ulong)&priv->txdes[0]) & ~(ARCH_DMA_MINALIGN - 1);
|
|
end = start + roundup(sizeof(priv->txdes), ARCH_DMA_MINALIGN);
|
|
flush_dcache_range(start, end);
|
|
|
|
for (i = 0; i < PKTBUFSRX; i++) {
|
|
priv->rxdes[i].rxdes3 = (unsigned int)net_rx_packets[i];
|
|
priv->rxdes[i].rxdes0 = 0;
|
|
}
|
|
priv->rxdes[PKTBUFSRX - 1].rxdes0 = priv->rxdes0_edorr_mask;
|
|
|
|
start = ((ulong)&priv->rxdes[0]) & ~(ARCH_DMA_MINALIGN - 1);
|
|
end = start + roundup(sizeof(priv->rxdes), ARCH_DMA_MINALIGN);
|
|
flush_dcache_range(start, end);
|
|
|
|
/* transmit ring */
|
|
writel((u32)priv->txdes, &ftgmac100->txr_badr);
|
|
|
|
/* receive ring */
|
|
writel((u32)priv->rxdes, &ftgmac100->rxr_badr);
|
|
|
|
/* poll receive descriptor automatically */
|
|
writel(FTGMAC100_APTC_RXPOLL_CNT(1), &ftgmac100->aptc);
|
|
|
|
/* config receive buffer size register */
|
|
writel(FTGMAC100_RBSR_SIZE(FTGMAC100_RBSR_DEFAULT), &ftgmac100->rbsr);
|
|
|
|
/* enable transmitter, receiver */
|
|
maccr = FTGMAC100_MACCR_TXMAC_EN |
|
|
FTGMAC100_MACCR_RXMAC_EN |
|
|
FTGMAC100_MACCR_TXDMA_EN |
|
|
FTGMAC100_MACCR_RXDMA_EN |
|
|
FTGMAC100_MACCR_CRC_APD |
|
|
FTGMAC100_MACCR_FULLDUP |
|
|
FTGMAC100_MACCR_RX_RUNT |
|
|
FTGMAC100_MACCR_RX_BROADPKT;
|
|
|
|
writel(maccr, &ftgmac100->maccr);
|
|
|
|
ret = phy_startup(phydev);
|
|
if (ret) {
|
|
dev_err(phydev->dev, "Could not start PHY\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = ftgmac100_phy_adjust_link(priv);
|
|
if (ret) {
|
|
dev_err(phydev->dev, "Could not adjust link\n");
|
|
return ret;
|
|
}
|
|
|
|
printf("%s: link up, %d Mbps %s-duplex mac:%pM\n", phydev->dev->name,
|
|
phydev->speed, phydev->duplex ? "full" : "half", plat->enetaddr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ftgmac100_free_pkt(struct udevice *dev, uchar *packet, int length)
|
|
{
|
|
struct ftgmac100_data *priv = dev_get_priv(dev);
|
|
struct ftgmac100_rxdes *curr_des = &priv->rxdes[priv->rx_index];
|
|
ulong des_start = ((ulong)curr_des) & ~(ARCH_DMA_MINALIGN - 1);
|
|
ulong des_end = des_start +
|
|
roundup(sizeof(*curr_des), ARCH_DMA_MINALIGN);
|
|
|
|
/* Release buffer to DMA and flush descriptor */
|
|
curr_des->rxdes0 &= ~FTGMAC100_RXDES0_RXPKT_RDY;
|
|
flush_dcache_range(des_start, des_end);
|
|
|
|
/* Move to next descriptor */
|
|
priv->rx_index = (priv->rx_index + 1) % PKTBUFSRX;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Get a data block via Ethernet
|
|
*/
|
|
static int ftgmac100_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
struct ftgmac100_data *priv = dev_get_priv(dev);
|
|
struct ftgmac100_rxdes *curr_des = &priv->rxdes[priv->rx_index];
|
|
unsigned short rxlen;
|
|
ulong des_start = ((ulong)curr_des) & ~(ARCH_DMA_MINALIGN - 1);
|
|
ulong des_end = des_start +
|
|
roundup(sizeof(*curr_des), ARCH_DMA_MINALIGN);
|
|
ulong data_start = curr_des->rxdes3;
|
|
ulong data_end;
|
|
|
|
invalidate_dcache_range(des_start, des_end);
|
|
|
|
if (!(curr_des->rxdes0 & FTGMAC100_RXDES0_RXPKT_RDY))
|
|
return -EAGAIN;
|
|
|
|
if (curr_des->rxdes0 & (FTGMAC100_RXDES0_RX_ERR |
|
|
FTGMAC100_RXDES0_CRC_ERR |
|
|
FTGMAC100_RXDES0_FTL |
|
|
FTGMAC100_RXDES0_RUNT |
|
|
FTGMAC100_RXDES0_RX_ODD_NB)) {
|
|
return -EAGAIN;
|
|
}
|
|
|
|
rxlen = FTGMAC100_RXDES0_VDBC(curr_des->rxdes0);
|
|
|
|
debug("%s(): RX buffer %d, %x received\n",
|
|
__func__, priv->rx_index, rxlen);
|
|
|
|
/* Invalidate received data */
|
|
data_end = data_start + roundup(rxlen, ARCH_DMA_MINALIGN);
|
|
invalidate_dcache_range(data_start, data_end);
|
|
*packetp = (uchar *)data_start;
|
|
|
|
return rxlen;
|
|
}
|
|
|
|
static u32 ftgmac100_read_txdesc(const void *desc)
|
|
{
|
|
const struct ftgmac100_txdes *txdes = desc;
|
|
ulong des_start = ((ulong)txdes) & ~(ARCH_DMA_MINALIGN - 1);
|
|
ulong des_end = des_start + roundup(sizeof(*txdes), ARCH_DMA_MINALIGN);
|
|
|
|
invalidate_dcache_range(des_start, des_end);
|
|
|
|
return txdes->txdes0;
|
|
}
|
|
|
|
BUILD_WAIT_FOR_BIT(ftgmac100_txdone, u32, ftgmac100_read_txdesc)
|
|
|
|
/*
|
|
* Send a data block via Ethernet
|
|
*/
|
|
static int ftgmac100_send(struct udevice *dev, void *packet, int length)
|
|
{
|
|
struct ftgmac100_data *priv = dev_get_priv(dev);
|
|
struct ftgmac100 *ftgmac100 = priv->iobase;
|
|
struct ftgmac100_txdes *curr_des = &priv->txdes[priv->tx_index];
|
|
ulong des_start = ((ulong)curr_des) & ~(ARCH_DMA_MINALIGN - 1);
|
|
ulong des_end = des_start +
|
|
roundup(sizeof(*curr_des), ARCH_DMA_MINALIGN);
|
|
ulong data_start;
|
|
ulong data_end;
|
|
int rc;
|
|
|
|
invalidate_dcache_range(des_start, des_end);
|
|
|
|
if (curr_des->txdes0 & FTGMAC100_TXDES0_TXDMA_OWN) {
|
|
dev_err(dev, "no TX descriptor available\n");
|
|
return -EPERM;
|
|
}
|
|
|
|
debug("%s(%x, %x)\n", __func__, (int)packet, length);
|
|
|
|
length = (length < ETH_ZLEN) ? ETH_ZLEN : length;
|
|
|
|
curr_des->txdes3 = (unsigned int)packet;
|
|
|
|
/* Flush data to be sent */
|
|
data_start = curr_des->txdes3;
|
|
data_end = data_start + roundup(length, ARCH_DMA_MINALIGN);
|
|
flush_dcache_range(data_start, data_end);
|
|
|
|
/* Only one segment on TXBUF */
|
|
curr_des->txdes0 &= priv->txdes0_edotr_mask;
|
|
curr_des->txdes0 |= FTGMAC100_TXDES0_FTS |
|
|
FTGMAC100_TXDES0_LTS |
|
|
FTGMAC100_TXDES0_TXBUF_SIZE(length) |
|
|
FTGMAC100_TXDES0_TXDMA_OWN ;
|
|
|
|
/* Flush modified buffer descriptor */
|
|
flush_dcache_range(des_start, des_end);
|
|
|
|
/* Start transmit */
|
|
writel(1, &ftgmac100->txpd);
|
|
|
|
rc = wait_for_bit_ftgmac100_txdone(curr_des,
|
|
FTGMAC100_TXDES0_TXDMA_OWN, false,
|
|
FTGMAC100_TX_TIMEOUT_MS, true);
|
|
if (rc)
|
|
return rc;
|
|
|
|
debug("%s(): packet sent\n", __func__);
|
|
|
|
/* Move to next descriptor */
|
|
priv->tx_index = (priv->tx_index + 1) % PKTBUFSTX;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ftgmac100_write_hwaddr(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
struct ftgmac100_data *priv = dev_get_priv(dev);
|
|
|
|
return ftgmac100_set_mac(priv, pdata->enetaddr);
|
|
}
|
|
|
|
static int ftgmac100_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
struct ftgmac100_data *priv = dev_get_priv(dev);
|
|
const char *phy_mode;
|
|
|
|
pdata->iobase = dev_read_addr(dev);
|
|
pdata->phy_interface = -1;
|
|
phy_mode = dev_read_string(dev, "phy-mode");
|
|
if (phy_mode)
|
|
pdata->phy_interface = phy_get_interface_by_name(phy_mode);
|
|
if (pdata->phy_interface == -1) {
|
|
dev_err(dev, "Invalid PHY interface '%s'\n", phy_mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pdata->max_speed = dev_read_u32_default(dev, "max-speed", 0);
|
|
|
|
if (dev_get_driver_data(dev) == FTGMAC100_MODEL_ASPEED) {
|
|
priv->rxdes0_edorr_mask = BIT(30);
|
|
priv->txdes0_edotr_mask = BIT(30);
|
|
} else {
|
|
priv->rxdes0_edorr_mask = BIT(15);
|
|
priv->txdes0_edotr_mask = BIT(15);
|
|
}
|
|
|
|
return clk_get_bulk(dev, &priv->clks);
|
|
}
|
|
|
|
static int ftgmac100_probe(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
struct ftgmac100_data *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
priv->iobase = (struct ftgmac100 *)pdata->iobase;
|
|
priv->phy_mode = pdata->phy_interface;
|
|
priv->max_speed = pdata->max_speed;
|
|
priv->phy_addr = 0;
|
|
|
|
#ifdef CONFIG_PHY_ADDR
|
|
priv->phy_addr = CONFIG_PHY_ADDR;
|
|
#endif
|
|
|
|
ret = clk_enable_bulk(&priv->clks);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = ftgmac100_mdio_init(dev);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to initialize mdiobus: %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = ftgmac100_phy_init(dev);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to initialize PHY: %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
if (ret)
|
|
clk_release_bulk(&priv->clks);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ftgmac100_remove(struct udevice *dev)
|
|
{
|
|
struct ftgmac100_data *priv = dev_get_priv(dev);
|
|
|
|
free(priv->phydev);
|
|
mdio_unregister(priv->bus);
|
|
mdio_free(priv->bus);
|
|
clk_release_bulk(&priv->clks);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct eth_ops ftgmac100_ops = {
|
|
.start = ftgmac100_start,
|
|
.send = ftgmac100_send,
|
|
.recv = ftgmac100_recv,
|
|
.stop = ftgmac100_stop,
|
|
.free_pkt = ftgmac100_free_pkt,
|
|
.write_hwaddr = ftgmac100_write_hwaddr,
|
|
};
|
|
|
|
static const struct udevice_id ftgmac100_ids[] = {
|
|
{ .compatible = "faraday,ftgmac100", .data = FTGMAC100_MODEL_FARADAY },
|
|
{ .compatible = "aspeed,ast2500-mac", .data = FTGMAC100_MODEL_ASPEED },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(ftgmac100) = {
|
|
.name = "ftgmac100",
|
|
.id = UCLASS_ETH,
|
|
.of_match = ftgmac100_ids,
|
|
.ofdata_to_platdata = ftgmac100_ofdata_to_platdata,
|
|
.probe = ftgmac100_probe,
|
|
.remove = ftgmac100_remove,
|
|
.ops = &ftgmac100_ops,
|
|
.priv_auto_alloc_size = sizeof(struct ftgmac100_data),
|
|
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
|
|
.flags = DM_FLAG_ALLOC_PRIV_DMA,
|
|
};
|