u-boot/arch/arm/include/asm/arch-pxa/pxa-regs.h
Marek Vasut 3ba8bf7c6d PXA: pxa-regs.h cleanup
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-10-19 22:46:22 +02:00

2800 lines
124 KiB
C

/*
* linux/include/asm-arm/arch-pxa/pxa-regs.h
*
* Author: Nicolas Pitre
* Created: Jun 15, 2001
* Copyright: MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* - 2003/01/20: Robert Schwebel <r.schwebel@pengutronix.de
* Original file taken from linux-2.4.19-rmk4-pxa1. Added some definitions.
* Added include for hardware.h (for __REG definition)
*/
#ifndef _PXA_REGS_H_
#define _PXA_REGS_H_
#include "bitfield.h"
#include "hardware.h"
/* FIXME hack so that SA-1111.h will work [cb] */
#ifndef __ASSEMBLY__
typedef unsigned short Word16 ;
typedef unsigned int Word32 ;
typedef Word32 Word ;
typedef Word Quad [4] ;
typedef void *Address ;
typedef void (*ExcpHndlr) (void) ;
#endif
/*
* PXA Chip selects
*/
#ifdef CONFIG_CPU_MONAHANS
#define PXA_CS0_PHYS 0x00000000 /* for both small and large same start */
#define PXA_CS1_PHYS 0x04000000 /* Small partition start address (64MB) */
#define PXA_CS1_LPHYS 0x30000000 /* Large partition start address (256MB) */
#define PXA_CS2_PHYS 0x10000000 /* (64MB) */
#define PXA_CS3_PHYS 0x14000000 /* (64MB) */
#define PXA_PCMCIA_PHYS 0x20000000 /* (256MB) */
#else
#define PXA_CS0_PHYS 0x00000000
#define PXA_CS1_PHYS 0x04000000
#define PXA_CS2_PHYS 0x08000000
#define PXA_CS3_PHYS 0x0C000000
#define PXA_CS4_PHYS 0x10000000
#define PXA_CS5_PHYS 0x14000000
#endif /* CONFIG_CPU_MONAHANS */
/*
* Personal Computer Memory Card International Association (PCMCIA) sockets
*/
#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */
#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */
#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */
#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */
#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
#ifndef CONFIG_CPU_MONAHANS /* Monahans supports only one slot */
#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */
#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */
#endif
#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */
#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \
(0x20000000 + (Nb)*PCMCIASp)
#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */
#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \
(_PCMCIA (Nb) + 2*PCMCIAPrtSp)
#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \
(_PCMCIA (Nb) + 3*PCMCIAPrtSp)
#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */
#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */
#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */
#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */
#ifndef CONFIG_CPU_MONAHANS /* Monahans supports only one slot */
#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */
#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */
#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */
#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */
#endif
/*
* DMA Controller
*/
#define DCSR0 0x40000000 /* DMA Control / Status Register for Channel 0 */
#define DCSR1 0x40000004 /* DMA Control / Status Register for Channel 1 */
#define DCSR2 0x40000008 /* DMA Control / Status Register for Channel 2 */
#define DCSR3 0x4000000c /* DMA Control / Status Register for Channel 3 */
#define DCSR4 0x40000010 /* DMA Control / Status Register for Channel 4 */
#define DCSR5 0x40000014 /* DMA Control / Status Register for Channel 5 */
#define DCSR6 0x40000018 /* DMA Control / Status Register for Channel 6 */
#define DCSR7 0x4000001c /* DMA Control / Status Register for Channel 7 */
#define DCSR8 0x40000020 /* DMA Control / Status Register for Channel 8 */
#define DCSR9 0x40000024 /* DMA Control / Status Register for Channel 9 */
#define DCSR10 0x40000028 /* DMA Control / Status Register for Channel 10 */
#define DCSR11 0x4000002c /* DMA Control / Status Register for Channel 11 */
#define DCSR12 0x40000030 /* DMA Control / Status Register for Channel 12 */
#define DCSR13 0x40000034 /* DMA Control / Status Register for Channel 13 */
#define DCSR14 0x40000038 /* DMA Control / Status Register for Channel 14 */
#define DCSR15 0x4000003c /* DMA Control / Status Register for Channel 15 */
#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define DCSR16 0x40000040 /* DMA Control / Status Register for Channel 16 */
#define DCSR17 0x40000044 /* DMA Control / Status Register for Channel 17 */
#define DCSR18 0x40000048 /* DMA Control / Status Register for Channel 18 */
#define DCSR19 0x4000004c /* DMA Control / Status Register for Channel 19 */
#define DCSR20 0x40000050 /* DMA Control / Status Register for Channel 20 */
#define DCSR21 0x40000054 /* DMA Control / Status Register for Channel 21 */
#define DCSR22 0x40000058 /* DMA Control / Status Register for Channel 22 */
#define DCSR23 0x4000005c /* DMA Control / Status Register for Channel 23 */
#define DCSR24 0x40000060 /* DMA Control / Status Register for Channel 24 */
#define DCSR25 0x40000064 /* DMA Control / Status Register for Channel 25 */
#define DCSR26 0x40000068 /* DMA Control / Status Register for Channel 26 */
#define DCSR27 0x4000006c /* DMA Control / Status Register for Channel 27 */
#define DCSR28 0x40000070 /* DMA Control / Status Register for Channel 28 */
#define DCSR29 0x40000074 /* DMA Control / Status Register for Channel 29 */
#define DCSR30 0x40000078 /* DMA Control / Status Register for Channel 30 */
#define DCSR31 0x4000007c /* DMA Control / Status Register for Channel 31 */
#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
#define DCSR(x) (0x40000000 | ((x) << 2))
#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */
#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */
#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
#if defined(CONFIG_PXA27X) || defined (CONFIG_CPU_MONAHANS)
#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
#define DCSR_ENRINTR (1 << 9) /* The end of Receive */
#endif
#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */
#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */
#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */
#define DINT 0x400000f0 /* DMA Interrupt Register */
#define DRCMR0 0x40000100 /* Request to Channel Map Register for DREQ 0 */
#define DRCMR1 0x40000104 /* Request to Channel Map Register for DREQ 1 */
#define DRCMR2 0x40000108 /* Request to Channel Map Register for I2S receive Request */
#define DRCMR3 0x4000010c /* Request to Channel Map Register for I2S transmit Request */
#define DRCMR4 0x40000110 /* Request to Channel Map Register for BTUART receive Request */
#define DRCMR5 0x40000114 /* Request to Channel Map Register for BTUART transmit Request. */
#define DRCMR6 0x40000118 /* Request to Channel Map Register for FFUART receive Request */
#define DRCMR7 0x4000011c /* Request to Channel Map Register for FFUART transmit Request */
#define DRCMR8 0x40000120 /* Request to Channel Map Register for AC97 microphone Request */
#define DRCMR9 0x40000124 /* Request to Channel Map Register for AC97 modem receive Request */
#define DRCMR10 0x40000128 /* Request to Channel Map Register for AC97 modem transmit Request */
#define DRCMR11 0x4000012c /* Request to Channel Map Register for AC97 audio receive Request */
#define DRCMR12 0x40000130 /* Request to Channel Map Register for AC97 audio transmit Request */
#define DRCMR13 0x40000134 /* Request to Channel Map Register for SSP receive Request */
#define DRCMR14 0x40000138 /* Request to Channel Map Register for SSP transmit Request */
#define DRCMR15 0x4000013c /* Reserved */
#define DRCMR16 0x40000140 /* Reserved */
#define DRCMR17 0x40000144 /* Request to Channel Map Register for ICP receive Request */
#define DRCMR18 0x40000148 /* Request to Channel Map Register for ICP transmit Request */
#define DRCMR19 0x4000014c /* Request to Channel Map Register for STUART receive Request */
#define DRCMR20 0x40000150 /* Request to Channel Map Register for STUART transmit Request */
#define DRCMR21 0x40000154 /* Request to Channel Map Register for MMC receive Request */
#define DRCMR22 0x40000158 /* Request to Channel Map Register for MMC transmit Request */
#define DRCMR23 0x4000015c /* Reserved */
#define DRCMR24 0x40000160 /* Reserved */
#define DRCMR25 0x40000164 /* Request to Channel Map Register for USB endpoint 1 Request */
#define DRCMR26 0x40000168 /* Request to Channel Map Register for USB endpoint 2 Request */
#define DRCMR27 0x4000016C /* Request to Channel Map Register for USB endpoint 3 Request */
#define DRCMR28 0x40000170 /* Request to Channel Map Register for USB endpoint 4 Request */
#define DRCMR29 0x40000174 /* Reserved */
#define DRCMR30 0x40000178 /* Request to Channel Map Register for USB endpoint 6 Request */
#define DRCMR31 0x4000017C /* Request to Channel Map Register for USB endpoint 7 Request */
#define DRCMR32 0x40000180 /* Request to Channel Map Register for USB endpoint 8 Request */
#define DRCMR33 0x40000184 /* Request to Channel Map Register for USB endpoint 9 Request */
#define DRCMR34 0x40000188 /* Reserved */
#define DRCMR35 0x4000018C /* Request to Channel Map Register for USB endpoint 11 Request */
#define DRCMR36 0x40000190 /* Request to Channel Map Register for USB endpoint 12 Request */
#define DRCMR37 0x40000194 /* Request to Channel Map Register for USB endpoint 13 Request */
#define DRCMR38 0x40000198 /* Request to Channel Map Register for USB endpoint 14 Request */
#define DRCMR39 0x4000019C /* Reserved */
#define DRCMR68 0x40001110 /* Request to Channel Map Register for Camera FIFO 0 Request */
#define DRCMR69 0x40001114 /* Request to Channel Map Register for Camera FIFO 1 Request */
#define DRCMR70 0x40001118 /* Request to Channel Map Register for Camera FIFO 2 Request */
#define DRCMRRXSADR DRCMR2
#define DRCMRTXSADR DRCMR3
#define DRCMRRXBTRBR DRCMR4
#define DRCMRTXBTTHR DRCMR5
#define DRCMRRXFFRBR DRCMR6
#define DRCMRTXFFTHR DRCMR7
#define DRCMRRXMCDR DRCMR8
#define DRCMRRXMODR DRCMR9
#define DRCMRTXMODR DRCMR10
#define DRCMRRXPCDR DRCMR11
#define DRCMRTXPCDR DRCMR12
#define DRCMRRXSSDR DRCMR13
#define DRCMRTXSSDR DRCMR14
#define DRCMRRXICDR DRCMR17
#define DRCMRTXICDR DRCMR18
#define DRCMRRXSTRBR DRCMR19
#define DRCMRTXSTTHR DRCMR20
#define DRCMRRXMMC DRCMR21
#define DRCMRTXMMC DRCMR22
#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */
#define DRCMR_CHLNUM 0x0f /* mask for Channel Number (read / write) */
#define DDADR0 0x40000200 /* DMA Descriptor Address Register Channel 0 */
#define DSADR0 0x40000204 /* DMA Source Address Register Channel 0 */
#define DTADR0 0x40000208 /* DMA Target Address Register Channel 0 */
#define DCMD0 0x4000020c /* DMA Command Address Register Channel 0 */
#define DDADR1 0x40000210 /* DMA Descriptor Address Register Channel 1 */
#define DSADR1 0x40000214 /* DMA Source Address Register Channel 1 */
#define DTADR1 0x40000218 /* DMA Target Address Register Channel 1 */
#define DCMD1 0x4000021c /* DMA Command Address Register Channel 1 */
#define DDADR2 0x40000220 /* DMA Descriptor Address Register Channel 2 */
#define DSADR2 0x40000224 /* DMA Source Address Register Channel 2 */
#define DTADR2 0x40000228 /* DMA Target Address Register Channel 2 */
#define DCMD2 0x4000022c /* DMA Command Address Register Channel 2 */
#define DDADR3 0x40000230 /* DMA Descriptor Address Register Channel 3 */
#define DSADR3 0x40000234 /* DMA Source Address Register Channel 3 */
#define DTADR3 0x40000238 /* DMA Target Address Register Channel 3 */
#define DCMD3 0x4000023c /* DMA Command Address Register Channel 3 */
#define DDADR4 0x40000240 /* DMA Descriptor Address Register Channel 4 */
#define DSADR4 0x40000244 /* DMA Source Address Register Channel 4 */
#define DTADR4 0x40000248 /* DMA Target Address Register Channel 4 */
#define DCMD4 0x4000024c /* DMA Command Address Register Channel 4 */
#define DDADR5 0x40000250 /* DMA Descriptor Address Register Channel 5 */
#define DSADR5 0x40000254 /* DMA Source Address Register Channel 5 */
#define DTADR5 0x40000258 /* DMA Target Address Register Channel 5 */
#define DCMD5 0x4000025c /* DMA Command Address Register Channel 5 */
#define DDADR6 0x40000260 /* DMA Descriptor Address Register Channel 6 */
#define DSADR6 0x40000264 /* DMA Source Address Register Channel 6 */
#define DTADR6 0x40000268 /* DMA Target Address Register Channel 6 */
#define DCMD6 0x4000026c /* DMA Command Address Register Channel 6 */
#define DDADR7 0x40000270 /* DMA Descriptor Address Register Channel 7 */
#define DSADR7 0x40000274 /* DMA Source Address Register Channel 7 */
#define DTADR7 0x40000278 /* DMA Target Address Register Channel 7 */
#define DCMD7 0x4000027c /* DMA Command Address Register Channel 7 */
#define DDADR8 0x40000280 /* DMA Descriptor Address Register Channel 8 */
#define DSADR8 0x40000284 /* DMA Source Address Register Channel 8 */
#define DTADR8 0x40000288 /* DMA Target Address Register Channel 8 */
#define DCMD8 0x4000028c /* DMA Command Address Register Channel 8 */
#define DDADR9 0x40000290 /* DMA Descriptor Address Register Channel 9 */
#define DSADR9 0x40000294 /* DMA Source Address Register Channel 9 */
#define DTADR9 0x40000298 /* DMA Target Address Register Channel 9 */
#define DCMD9 0x4000029c /* DMA Command Address Register Channel 9 */
#define DDADR10 0x400002a0 /* DMA Descriptor Address Register Channel 10 */
#define DSADR10 0x400002a4 /* DMA Source Address Register Channel 10 */
#define DTADR10 0x400002a8 /* DMA Target Address Register Channel 10 */
#define DCMD10 0x400002ac /* DMA Command Address Register Channel 10 */
#define DDADR11 0x400002b0 /* DMA Descriptor Address Register Channel 11 */
#define DSADR11 0x400002b4 /* DMA Source Address Register Channel 11 */
#define DTADR11 0x400002b8 /* DMA Target Address Register Channel 11 */
#define DCMD11 0x400002bc /* DMA Command Address Register Channel 11 */
#define DDADR12 0x400002c0 /* DMA Descriptor Address Register Channel 12 */
#define DSADR12 0x400002c4 /* DMA Source Address Register Channel 12 */
#define DTADR12 0x400002c8 /* DMA Target Address Register Channel 12 */
#define DCMD12 0x400002cc /* DMA Command Address Register Channel 12 */
#define DDADR13 0x400002d0 /* DMA Descriptor Address Register Channel 13 */
#define DSADR13 0x400002d4 /* DMA Source Address Register Channel 13 */
#define DTADR13 0x400002d8 /* DMA Target Address Register Channel 13 */
#define DCMD13 0x400002dc /* DMA Command Address Register Channel 13 */
#define DDADR14 0x400002e0 /* DMA Descriptor Address Register Channel 14 */
#define DSADR14 0x400002e4 /* DMA Source Address Register Channel 14 */
#define DTADR14 0x400002e8 /* DMA Target Address Register Channel 14 */
#define DCMD14 0x400002ec /* DMA Command Address Register Channel 14 */
#define DDADR15 0x400002f0 /* DMA Descriptor Address Register Channel 15 */
#define DSADR15 0x400002f4 /* DMA Source Address Register Channel 15 */
#define DTADR15 0x400002f8 /* DMA Target Address Register Channel 15 */
#define DCMD15 0x400002fc /* DMA Command Address Register Channel 15 */
#define DDADR(x) (0x40000200 | ((x) << 4))
#define DSADR(x) (0x40000204 | ((x) << 4))
#define DTADR(x) (0x40000208 | ((x) << 4))
#define DCMD(x) (0x4000020c | ((x) << 4))
#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */
#define DDADR_STOP (1 << 0) /* Stop (read / write) */
#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */
#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */
#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */
#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */
#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */
#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */
#define DCMD_BURST8 (1 << 16) /* 8 byte burst */
#define DCMD_BURST16 (2 << 16) /* 16 byte burst */
#define DCMD_BURST32 (3 << 16) /* 32 byte burst */
#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */
#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */
#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
/* default combinations */
#define DCMD_RXPCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4)
#define DCMD_RXMCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4)
#define DCMD_TXPCDR (DCMD_INCSRCADDR|DCMD_FLOWTRG|DCMD_BURST32|DCMD_WIDTH4)
/******************************************************************************/
/*
* UARTs
*/
/* Full Function UART (FFUART) */
#define FFUART FFRBR
#define FFRBR 0x40100000 /* Receive Buffer Register (read only) */
#define FFTHR 0x40100000 /* Transmit Holding Register (write only) */
#define FFIER 0x40100004 /* Interrupt Enable Register (read/write) */
#define FFIIR 0x40100008 /* Interrupt ID Register (read only) */
#define FFFCR 0x40100008 /* FIFO Control Register (write only) */
#define FFLCR 0x4010000C /* Line Control Register (read/write) */
#define FFMCR 0x40100010 /* Modem Control Register (read/write) */
#define FFLSR 0x40100014 /* Line Status Register (read only) */
#define FFMSR 0x40100018 /* Modem Status Register (read only) */
#define FFSPR 0x4010001C /* Scratch Pad Register (read/write) */
#define FFISR 0x40100020 /* Infrared Selection Register (read/write) */
#define FFDLL 0x40100000 /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define FFDLH 0x40100004 /* Divisor Latch High Register (DLAB = 1) (read/write) */
/* Bluetooth UART (BTUART) */
#define BTUART BTRBR
#define BTRBR 0x40200000 /* Receive Buffer Register (read only) */
#define BTTHR 0x40200000 /* Transmit Holding Register (write only) */
#define BTIER 0x40200004 /* Interrupt Enable Register (read/write) */
#define BTIIR 0x40200008 /* Interrupt ID Register (read only) */
#define BTFCR 0x40200008 /* FIFO Control Register (write only) */
#define BTLCR 0x4020000C /* Line Control Register (read/write) */
#define BTMCR 0x40200010 /* Modem Control Register (read/write) */
#define BTLSR 0x40200014 /* Line Status Register (read only) */
#define BTMSR 0x40200018 /* Modem Status Register (read only) */
#define BTSPR 0x4020001C /* Scratch Pad Register (read/write) */
#define BTISR 0x40200020 /* Infrared Selection Register (read/write) */
#define BTDLL 0x40200000 /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define BTDLH 0x40200004 /* Divisor Latch High Register (DLAB = 1) (read/write) */
/* Standard UART (STUART) */
#define STUART STRBR
#define STRBR 0x40700000 /* Receive Buffer Register (read only) */
#define STTHR 0x40700000 /* Transmit Holding Register (write only) */
#define STIER 0x40700004 /* Interrupt Enable Register (read/write) */
#define STIIR 0x40700008 /* Interrupt ID Register (read only) */
#define STFCR 0x40700008 /* FIFO Control Register (write only) */
#define STLCR 0x4070000C /* Line Control Register (read/write) */
#define STMCR 0x40700010 /* Modem Control Register (read/write) */
#define STLSR 0x40700014 /* Line Status Register (read only) */
#define STMSR 0x40700018 /* Reserved */
#define STSPR 0x4070001C /* Scratch Pad Register (read/write) */
#define STISR 0x40700020 /* Infrared Selection Register (read/write) */
#define STDLL 0x40700000 /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define STDLH 0x40700004 /* Divisor Latch High Register (DLAB = 1) (read/write) */
#define IER_DMAE (1 << 7) /* DMA Requests Enable */
#define IER_UUE (1 << 6) /* UART Unit Enable */
#define IER_NRZE (1 << 5) /* NRZ coding Enable */
#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */
#define IER_MIE (1 << 3) /* Modem Interrupt Enable */
#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */
#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */
#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */
#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */
#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */
#define IIR_TOD (1 << 3) /* Time Out Detected */
#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */
#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */
#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */
#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */
#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */
#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */
#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */
#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */
#define FCR_ITL_1 (0)
#define FCR_ITL_8 (FCR_ITL1)
#define FCR_ITL_16 (FCR_ITL2)
#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1)
#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */
#define LCR_SB (1 << 6) /* Set Break */
#define LCR_STKYP (1 << 5) /* Sticky Parity */
#define LCR_EPS (1 << 4) /* Even Parity Select */
#define LCR_PEN (1 << 3) /* Parity Enable */
#define LCR_STB (1 << 2) /* Stop Bit */
#define LCR_WLS1 (1 << 1) /* Word Length Select */
#define LCR_WLS0 (1 << 0) /* Word Length Select */
#define LSR_FIFOE (1 << 7) /* FIFO Error Status */
#define LSR_TEMT (1 << 6) /* Transmitter Empty */
#define LSR_TDRQ (1 << 5) /* Transmit Data Request */
#define LSR_BI (1 << 4) /* Break Interrupt */
#define LSR_FE (1 << 3) /* Framing Error */
#define LSR_PE (1 << 2) /* Parity Error */
#define LSR_OE (1 << 1) /* Overrun Error */
#define LSR_DR (1 << 0) /* Data Ready */
#define MCR_LOOP (1 << 4) /* */
#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
#define MCR_RTS (1 << 1) /* Request to Send */
#define MCR_DTR (1 << 0) /* Data Terminal Ready */
#define MSR_DCD (1 << 7) /* Data Carrier Detect */
#define MSR_RI (1 << 6) /* Ring Indicator */
#define MSR_DSR (1 << 5) /* Data Set Ready */
#define MSR_CTS (1 << 4) /* Clear To Send */
#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */
#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */
#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */
#define MSR_DCTS (1 << 0) /* Delta Clear To Send */
/******************************************************************************/
/*
* IrSR (Infrared Selection Register)
*/
#define IrSR_OFFSET 0x20
#define IrSR_RXPL_NEG_IS_ZERO (1<<4)
#define IrSR_RXPL_POS_IS_ZERO 0x0
#define IrSR_TXPL_NEG_IS_ZERO (1<<3)
#define IrSR_TXPL_POS_IS_ZERO 0x0
#define IrSR_XMODE_PULSE_1_6 (1<<2)
#define IrSR_XMODE_PULSE_3_16 0x0
#define IrSR_RCVEIR_IR_MODE (1<<1)
#define IrSR_RCVEIR_UART_MODE 0x0
#define IrSR_XMITIR_IR_MODE (1<<0)
#define IrSR_XMITIR_UART_MODE 0x0
#define IrSR_IR_RECEIVE_ON (\
IrSR_RXPL_NEG_IS_ZERO | \
IrSR_TXPL_POS_IS_ZERO | \
IrSR_XMODE_PULSE_3_16 | \
IrSR_RCVEIR_IR_MODE | \
IrSR_XMITIR_UART_MODE)
#define IrSR_IR_TRANSMIT_ON (\
IrSR_RXPL_NEG_IS_ZERO | \
IrSR_TXPL_POS_IS_ZERO | \
IrSR_XMODE_PULSE_3_16 | \
IrSR_RCVEIR_UART_MODE | \
IrSR_XMITIR_IR_MODE)
/*
* I2C registers
*/
#define IBMR 0x40301680 /* I2C Bus Monitor Register - IBMR */
#define IDBR 0x40301688 /* I2C Data Buffer Register - IDBR */
#define ICR 0x40301690 /* I2C Control Register - ICR */
#define ISR 0x40301698 /* I2C Status Register - ISR */
#define ISAR 0x403016A0 /* I2C Slave Address Register - ISAR */
#ifdef CONFIG_CPU_MONAHANS
#define PWRIBMR 0x40f500C0 /* Power I2C Bus Monitor Register-IBMR */
#define PWRIDBR 0x40f500C4 /* Power I2C Data Buffer Register-IDBR */
#define PWRICR 0x40f500C8 /* Power I2C Control Register - ICR */
#define PWRISR 0x40f500CC /* Power I2C Status Register - ISR */
#define PWRISAR 0x40f500D0 /* Power I2C Slave Address Register-ISAR */
#else
#define PWRIBMR 0x40f00180 /* Power I2C Bus Monitor Register-IBMR */
#define PWRIDBR 0x40f00188 /* Power I2C Data Buffer Register-IDBR */
#define PWRICR 0x40f00190 /* Power I2C Control Register - ICR */
#define PWRISR 0x40f00198 /* Power I2C Status Register - ISR */
#define PWRISAR 0x40f001A0 /* Power I2C Slave Address Register-ISAR */
#endif
/* ----- Control register bits ---------------------------------------- */
#define ICR_START 0x1 /* start bit */
#define ICR_STOP 0x2 /* stop bit */
#define ICR_ACKNAK 0x4 /* send ACK(0) or NAK(1) */
#define ICR_TB 0x8 /* transfer byte bit */
#define ICR_MA 0x10 /* master abort */
#define ICR_SCLE 0x20 /* master clock enable, mona SCLEA */
#define ICR_IUE 0x40 /* unit enable */
#define ICR_GCD 0x80 /* general call disable */
#define ICR_ITEIE 0x100 /* enable tx interrupts */
#define ICR_IRFIE 0x200 /* enable rx interrupts, mona: DRFIE */
#define ICR_BEIE 0x400 /* enable bus error ints */
#define ICR_SSDIE 0x800 /* slave STOP detected int enable */
#define ICR_ALDIE 0x1000 /* enable arbitration interrupt */
#define ICR_SADIE 0x2000 /* slave address detected int enable */
#define ICR_UR 0x4000 /* unit reset */
#define ICR_FM 0x8000 /* Fast Mode */
/* ----- Status register bits ----------------------------------------- */
#define ISR_RWM 0x1 /* read/write mode */
#define ISR_ACKNAK 0x2 /* ack/nak status */
#define ISR_UB 0x4 /* unit busy */
#define ISR_IBB 0x8 /* bus busy */
#define ISR_SSD 0x10 /* slave stop detected */
#define ISR_ALD 0x20 /* arbitration loss detected */
#define ISR_ITE 0x40 /* tx buffer empty */
#define ISR_IRF 0x80 /* rx buffer full */
#define ISR_GCAD 0x100 /* general call address detected */
#define ISR_SAD 0x200 /* slave address detected */
#define ISR_BED 0x400 /* bus error no ACK/NAK */
/*
* Serial Audio Controller
*/
/* FIXME the audio defines collide w/ the SA1111 defines. I don't like these
* short defines because there is too much chance of namespace collision
*/
#define SACR0 0x40400000 /* Global Control Register */
#define SACR1 0x40400004 /* Serial Audio I 2 S/MSB-Justified Control Register */
#define SASR0 0x4040000C /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
#define SAIMR 0x40400014 /* Serial Audio Interrupt Mask Register */
#define SAICR 0x40400018 /* Serial Audio Interrupt Clear Register */
#define SADIV 0x40400060 /* Audio Clock Divider Register. */
#define SADR 0x40400080 /* Serial Audio Data Register (TX and RX FIFO access Register). */
/*
* AC97 Controller registers
*/
#define POCR 0x40500000 /* PCM Out Control Register */
#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
#define PICR 0x40500004 /* PCM In Control Register */
#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
#define MCCR 0x40500008 /* Mic In Control Register */
#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
#define GCR 0x4050000C /* Global Control Register */
#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */
#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */
#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */
#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */
#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */
#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */
#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */
#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */
#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */
#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */
#define POSR 0x40500010 /* PCM Out Status Register */
#define POSR_FIFOE (1 << 4) /* FIFO error */
#define PISR 0x40500014 /* PCM In Status Register */
#define PISR_FIFOE (1 << 4) /* FIFO error */
#define MCSR 0x40500018 /* Mic In Status Register */
#define MCSR_FIFOE (1 << 4) /* FIFO error */
#define GSR 0x4050001C /* Global Status Register */
#define GSR_CDONE (1 << 19) /* Command Done */
#define GSR_SDONE (1 << 18) /* Status Done */
#define GSR_RDCS (1 << 15) /* Read Completion Status */
#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */
#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */
#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */
#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */
#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */
#define GSR_SCR (1 << 9) /* Secondary Codec Ready */
#define GSR_PCR (1 << 8) /* Primary Codec Ready */
#define GSR_MINT (1 << 7) /* Mic In Interrupt */
#define GSR_POINT (1 << 6) /* PCM Out Interrupt */
#define GSR_PIINT (1 << 5) /* PCM In Interrupt */
#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */
#define GSR_MIINT (1 << 1) /* Modem In Interrupt */
#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */
#define CAR 0x40500020 /* CODEC Access Register */
#define CAR_CAIP (1 << 0) /* Codec Access In Progress */
#define PCDR 0x40500040 /* PCM FIFO Data Register */
#define MCDR 0x40500060 /* Mic-in FIFO Data Register */
#define MOCR 0x40500100 /* Modem Out Control Register */
#define MOCR_FEIE (1 << 3) /* FIFO Error */
#define MICR 0x40500108 /* Modem In Control Register */
#define MICR_FEIE (1 << 3) /* FIFO Error */
#define MOSR 0x40500110 /* Modem Out Status Register */
#define MOSR_FIFOE (1 << 4) /* FIFO error */
#define MISR 0x40500118 /* Modem In Status Register */
#define MISR_FIFOE (1 << 4) /* FIFO error */
#define MODR 0x40500140 /* Modem FIFO Data Register */
#define PAC_REG_BASE 0x40500200 /* Primary Audio Codec */
#define SAC_REG_BASE 0x40500300 /* Secondary Audio Codec */
#define PMC_REG_BASE 0x40500400 /* Primary Modem Codec */
#define SMC_REG_BASE 0x40500500 /* Secondary Modem Codec */
/*
* USB Device Controller
*/
#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define UDCCR 0x40600000 /* UDC Control Register */
#define UDCCR_UDE (1 << 0) /* UDC enable */
#define UDCCR_UDA (1 << 1) /* UDC active */
#define UDCCR_RSM (1 << 2) /* Device resume */
#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration Error */
#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active Configuration */
#define UDCCR_RESIR (1 << 29) /* Resume interrupt request */
#define UDCCR_SUSIR (1 << 28) /* Suspend interrupt request */
#define UDCCR_SM (1 << 28) /* Suspend interrupt mask */
#define UDCCR_RSTIR (1 << 27) /* Reset interrupt request */
#define UDCCR_REM (1 << 27) /* Reset interrupt mask */
#define UDCCR_RM (1 << 29) /* resume interrupt mask */
#define UDCCR_SRM (UDCCR_SM|UDCCR_RM)
#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */
#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation Protocol Port Support */
#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol Support */
#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol Enable */
#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */
#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */
#define UDCCR_ACN_S 11
#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */
#define UDCCR_AIN_S 8
#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface Setting Number */
#define UDCCR_AAISN_S 5
#define UDCCS0 0x40600100 /* UDC Endpoint 0 Control/Status Register */
#define UDCCS0_OPR (1 << 0) /* OUT packet ready */
#define UDCCS0_IPR (1 << 1) /* IN packet ready */
#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS0_DRWF (1 << 16) /* Device remote wakeup feature */
#define UDCCS0_SST (1 << 4) /* Sent stall */
#define UDCCS0_FST (1 << 5) /* Force stall */
#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */
#define UDCCS0_SA (1 << 7) /* Setup active */
/* Bulk IN - Endpoint 1,6,11 */
#define UDCCS1 0x40600104 /* UDC Endpoint 1 (IN) Control/Status Register */
#define UDCCS6 0x40600028 /* UDC Endpoint 6 (IN) Control/Status Register */
#define UDCCS11 0x4060003C /* UDC Endpoint 11 (IN) Control/Status Register */
#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */
#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */
#define UDCCS_BI_FTF (1 << 8) /* Flush Tx FIFO */
#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */
#define UDCCS_BI_SST (1 << 4) /* Sent stall */
#define UDCCS_BI_FST (1 << 5) /* Force stall */
#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */
/* Bulk OUT - Endpoint 2,7,12 */
#define UDCCS2 0x40600108 /* UDC Endpoint 2 (OUT) Control/Status Register */
#define UDCCS7 0x4060002C /* UDC Endpoint 7 (OUT) Control/Status Register */
#define UDCCS12 0x40600040 /* UDC Endpoint 12 (OUT) Control/Status Register */
#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */
#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */
#define UDCCS_BO_DME (1 << 3) /* DMA enable */
#define UDCCS_BO_SST (1 << 4) /* Sent stall */
#define UDCCS_BO_FST (1 << 5) /* Force stall */
#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */
#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */
/* Isochronous IN - Endpoint 3,8,13 */
#define UDCCS3 0x4060001C /* UDC Endpoint 3 (IN) Control/Status Register */
#define UDCCS8 0x40600030 /* UDC Endpoint 8 (IN) Control/Status Register */
#define UDCCS13 0x40600044 /* UDC Endpoint 13 (IN) Control/Status Register */
#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */
#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */
#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */
#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */
/* Isochronous OUT - Endpoint 4,9,14 */
#define UDCCS4 0x40600020 /* UDC Endpoint 4 (OUT) Control/Status Register */
#define UDCCS9 0x40600034 /* UDC Endpoint 9 (OUT) Control/Status Register */
#define UDCCS14 0x40600048 /* UDC Endpoint 14 (OUT) Control/Status Register */
#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */
#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */
#define UDCCS_IO_ROF (1 << 3) /* Receive overflow */
#define UDCCS_IO_DME (1 << 3) /* DMA enable */
#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */
#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */
/* Interrupt IN - Endpoint 5,10,15 */
#define UDCCS5 0x40600024 /* UDC Endpoint 5 (Interrupt) Control/Status Register */
#define UDCCS10 0x40600038 /* UDC Endpoint 10 (Interrupt) Control/Status Register */
#define UDCCS15 0x4060004C /* UDC Endpoint 15 (Interrupt) Control/Status Register */
#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */
#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */
#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */
#define UDCCS_INT_SST (1 << 4) /* Sent stall */
#define UDCCS_INT_FST (1 << 5) /* Force stall */
#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */
#define UFNRH 0x40600060 /* UDC Frame Number Register High */
#define UFNRL 0x40600014 /* UDC Frame Number Register Low */
#define UBCR2 0x40600208 /* UDC Byte Count Reg 2 */
#define UBCR4 0x4060006c /* UDC Byte Count Reg 4 */
#define UBCR7 0x40600070 /* UDC Byte Count Reg 7 */
#define UBCR9 0x40600074 /* UDC Byte Count Reg 9 */
#define UBCR12 0x40600078 /* UDC Byte Count Reg 12 */
#define UBCR14 0x4060007c /* UDC Byte Count Reg 14 */
#define UDDR0 0x40600300 /* UDC Endpoint 0 Data Register */
#define UDDR1 0x40600304 /* UDC Endpoint 1 Data Register */
#define UDDR2 0x40600308 /* UDC Endpoint 2 Data Register */
#define UDDR3 0x40600200 /* UDC Endpoint 3 Data Register */
#define UDDR4 0x40600400 /* UDC Endpoint 4 Data Register */
#define UDDR5 0x406000A0 /* UDC Endpoint 5 Data Register */
#define UDDR6 0x40600600 /* UDC Endpoint 6 Data Register */
#define UDDR7 0x40600680 /* UDC Endpoint 7 Data Register */
#define UDDR8 0x40600700 /* UDC Endpoint 8 Data Register */
#define UDDR9 0x40600900 /* UDC Endpoint 9 Data Register */
#define UDDR10 0x406000C0 /* UDC Endpoint 10 Data Register */
#define UDDR11 0x40600B00 /* UDC Endpoint 11 Data Register */
#define UDDR12 0x40600B80 /* UDC Endpoint 12 Data Register */
#define UDDR13 0x40600C00 /* UDC Endpoint 13 Data Register */
#define UDDR14 0x40600E00 /* UDC Endpoint 14 Data Register */
#define UDDR15 0x406000E0 /* UDC Endpoint 15 Data Register */
#define UICR0 0x40600004 /* UDC Interrupt Control Register 0 */
#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */
#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */
#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */
#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */
#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */
#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */
#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */
#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */
#define UICR1 0x40600008 /* UDC Interrupt Control Register 1 */
#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */
#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */
#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */
#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */
#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */
#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */
#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */
#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */
#define USIR0 0x4060000C /* UDC Status Interrupt Register 0 */
#define USIR0_IR0 (1 << 0) /* Interrup request ep 0 */
#define USIR0_IR1 (1 << 2) /* Interrup request ep 1 */
#define USIR0_IR2 (1 << 4) /* Interrup request ep 2 */
#define USIR0_IR3 (1 << 3) /* Interrup request ep 3 */
#define USIR0_IR4 (1 << 4) /* Interrup request ep 4 */
#define USIR0_IR5 (1 << 5) /* Interrup request ep 5 */
#define USIR0_IR6 (1 << 6) /* Interrup request ep 6 */
#define USIR0_IR7 (1 << 7) /* Interrup request ep 7 */
#define USIR1 0x40600010 /* UDC Status Interrupt Register 1 */
#define USIR1_IR8 (1 << 0) /* Interrup request ep 8 */
#define USIR1_IR9 (1 << 1) /* Interrup request ep 9 */
#define USIR1_IR10 (1 << 2) /* Interrup request ep 10 */
#define USIR1_IR11 (1 << 3) /* Interrup request ep 11 */
#define USIR1_IR12 (1 << 4) /* Interrup request ep 12 */
#define USIR1_IR13 (1 << 5) /* Interrup request ep 13 */
#define USIR1_IR14 (1 << 6) /* Interrup request ep 14 */
#define USIR1_IR15 (1 << 7) /* Interrup request ep 15 */
#define UDCICR0 0x40600004 /* UDC Interrupt Control Register0 */
#define UDCICR1 0x40600008 /* UDC Interrupt Control Register1 */
#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */
#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */
#define UDCICR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */
#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */
#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */
#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */
#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */
#define UDCISR0 0x4060000C /* UDC Interrupt Status Register 0 */
#define UDCISR1 0x40600010 /* UDC Interrupt Status Register 1 */
#define UDCISR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
#define UDCISR1_IRCC (1 << 31) /* IntEn - Configuration Change */
#define UDCISR1_IRSOF (1 << 30) /* IntEn - Start of Frame */
#define UDCISR1_IRRU (1 << 29) /* IntEn - Resume */
#define UDCISR1_IRSU (1 << 28) /* IntEn - Suspend */
#define UDCISR1_IRRS (1 << 27) /* IntEn - Reset */
#define UDCFNR 0x40600014 /* UDC Frame Number Register */
#define UDCOTGICR 0x40600018 /* UDC On-The-Go interrupt control */
#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */
#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt Rising Edge Interrupt Enable */
#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt Falling Edge Interrupt Enable */
#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge Interrupt Enable */
#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge Interrupt Enable */
#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge Interrupt Enable */
#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge Interrupt Enable */
#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge Interrupt Enable */
#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge Interrupt Enable */
#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising Edge Interrupt Enable */
#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling Edge Interrupt Enable */
#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge Interrupt Enable */
#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge Interrupt Enable */
#define UDCCSN(x) __REG2(0x40600100, (x) << 2)
#define UDCCSR0 0x40600100 /* UDC Control/Status register - Endpoint 0 */
#define UDCCSR0_SA (1 << 7) /* Setup Active */
#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */
#define UDCCSR0_FST (1 << 5) /* Force Stall */
#define UDCCSR0_SST (1 << 4) /* Sent Stall */
#define UDCCSR0_DME (1 << 3) /* DMA Enable */
#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */
#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */
#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */
#define UDCCSRA 0x40600104 /* UDC Control/Status register - Endpoint A */
#define UDCCSRB 0x40600108 /* UDC Control/Status register - Endpoint B */
#define UDCCSRC 0x4060010C /* UDC Control/Status register - Endpoint C */
#define UDCCSRD 0x40600110 /* UDC Control/Status register - Endpoint D */
#define UDCCSRE 0x40600114 /* UDC Control/Status register - Endpoint E */
#define UDCCSRF 0x40600118 /* UDC Control/Status register - Endpoint F */
#define UDCCSRG 0x4060011C /* UDC Control/Status register - Endpoint G */
#define UDCCSRH 0x40600120 /* UDC Control/Status register - Endpoint H */
#define UDCCSRI 0x40600124 /* UDC Control/Status register - Endpoint I */
#define UDCCSRJ 0x40600128 /* UDC Control/Status register - Endpoint J */
#define UDCCSRK 0x4060012C /* UDC Control/Status register - Endpoint K */
#define UDCCSRL 0x40600130 /* UDC Control/Status register - Endpoint L */
#define UDCCSRM 0x40600134 /* UDC Control/Status register - Endpoint M */
#define UDCCSRN 0x40600138 /* UDC Control/Status register - Endpoint N */
#define UDCCSRP 0x4060013C /* UDC Control/Status register - Endpoint P */
#define UDCCSRQ 0x40600140 /* UDC Control/Status register - Endpoint Q */
#define UDCCSRR 0x40600144 /* UDC Control/Status register - Endpoint R */
#define UDCCSRS 0x40600148 /* UDC Control/Status register - Endpoint S */
#define UDCCSRT 0x4060014C /* UDC Control/Status register - Endpoint T */
#define UDCCSRU 0x40600150 /* UDC Control/Status register - Endpoint U */
#define UDCCSRV 0x40600154 /* UDC Control/Status register - Endpoint V */
#define UDCCSRW 0x40600158 /* UDC Control/Status register - Endpoint W */
#define UDCCSRX 0x4060015C /* UDC Control/Status register - Endpoint X */
#define UDCCSR_DPE (1 << 9) /* Data Packet Error */
#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */
#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */
#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */
#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */
#define UDCCSR_FST (1 << 5) /* Force STALL */
#define UDCCSR_SST (1 << 4) /* Sent STALL */
#define UDCCSR_DME (1 << 3) /* DMA Enable */
#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */
#define UDCCSR_PC (1 << 1) /* Packet Complete */
#define UDCCSR_FS (1 << 0) /* FIFO needs service */
#define UDCBCN(x) __REG2(0x40600200, (x)<<2)
#define UDCBCR0 0x40600200 /* Byte Count Register - EP0 */
#define UDCBCRA 0x40600204 /* Byte Count Register - EPA */
#define UDCBCRB 0x40600208 /* Byte Count Register - EPB */
#define UDCBCRC 0x4060020C /* Byte Count Register - EPC */
#define UDCBCRD 0x40600210 /* Byte Count Register - EPD */
#define UDCBCRE 0x40600214 /* Byte Count Register - EPE */
#define UDCBCRF 0x40600218 /* Byte Count Register - EPF */
#define UDCBCRG 0x4060021C /* Byte Count Register - EPG */
#define UDCBCRH 0x40600220 /* Byte Count Register - EPH */
#define UDCBCRI 0x40600224 /* Byte Count Register - EPI */
#define UDCBCRJ 0x40600228 /* Byte Count Register - EPJ */
#define UDCBCRK 0x4060022C /* Byte Count Register - EPK */
#define UDCBCRL 0x40600230 /* Byte Count Register - EPL */
#define UDCBCRM 0x40600234 /* Byte Count Register - EPM */
#define UDCBCRN 0x40600238 /* Byte Count Register - EPN */
#define UDCBCRP 0x4060023C /* Byte Count Register - EPP */
#define UDCBCRQ 0x40600240 /* Byte Count Register - EPQ */
#define UDCBCRR 0x40600244 /* Byte Count Register - EPR */
#define UDCBCRS 0x40600248 /* Byte Count Register - EPS */
#define UDCBCRT 0x4060024C /* Byte Count Register - EPT */
#define UDCBCRU 0x40600250 /* Byte Count Register - EPU */
#define UDCBCRV 0x40600254 /* Byte Count Register - EPV */
#define UDCBCRW 0x40600258 /* Byte Count Register - EPW */
#define UDCBCRX 0x4060025C /* Byte Count Register - EPX */
#define UDCDN(x) __REG2(0x40600300, (x)<<2)
#define UDCDR0 0x40600300 /* Data Register - EP0 */
#define UDCDRA 0x40600304 /* Data Register - EPA */
#define UDCDRB 0x40600308 /* Data Register - EPB */
#define UDCDRC 0x4060030C /* Data Register - EPC */
#define UDCDRD 0x40600310 /* Data Register - EPD */
#define UDCDRE 0x40600314 /* Data Register - EPE */
#define UDCDRF 0x40600318 /* Data Register - EPF */
#define UDCDRG 0x4060031C /* Data Register - EPG */
#define UDCDRH 0x40600320 /* Data Register - EPH */
#define UDCDRI 0x40600324 /* Data Register - EPI */
#define UDCDRJ 0x40600328 /* Data Register - EPJ */
#define UDCDRK 0x4060032C /* Data Register - EPK */
#define UDCDRL 0x40600330 /* Data Register - EPL */
#define UDCDRM 0x40600334 /* Data Register - EPM */
#define UDCDRN 0x40600338 /* Data Register - EPN */
#define UDCDRP 0x4060033C /* Data Register - EPP */
#define UDCDRQ 0x40600340 /* Data Register - EPQ */
#define UDCDRR 0x40600344 /* Data Register - EPR */
#define UDCDRS 0x40600348 /* Data Register - EPS */
#define UDCDRT 0x4060034C /* Data Register - EPT */
#define UDCDRU 0x40600350 /* Data Register - EPU */
#define UDCDRV 0x40600354 /* Data Register - EPV */
#define UDCDRW 0x40600358 /* Data Register - EPW */
#define UDCDRX 0x4060035C /* Data Register - EPX */
#define UDCCN(x) __REG2(0x40600400, (x)<<2)
#define UDCCRA 0x40600404 /* Configuration register EPA */
#define UDCCRB 0x40600408 /* Configuration register EPB */
#define UDCCRC 0x4060040C /* Configuration register EPC */
#define UDCCRD 0x40600410 /* Configuration register EPD */
#define UDCCRE 0x40600414 /* Configuration register EPE */
#define UDCCRF 0x40600418 /* Configuration register EPF */
#define UDCCRG 0x4060041C /* Configuration register EPG */
#define UDCCRH 0x40600420 /* Configuration register EPH */
#define UDCCRI 0x40600424 /* Configuration register EPI */
#define UDCCRJ 0x40600428 /* Configuration register EPJ */
#define UDCCRK 0x4060042C /* Configuration register EPK */
#define UDCCRL 0x40600430 /* Configuration register EPL */
#define UDCCRM 0x40600434 /* Configuration register EPM */
#define UDCCRN 0x40600438 /* Configuration register EPN */
#define UDCCRP 0x4060043C /* Configuration register EPP */
#define UDCCRQ 0x40600440 /* Configuration register EPQ */
#define UDCCRR 0x40600444 /* Configuration register EPR */
#define UDCCRS 0x40600448 /* Configuration register EPS */
#define UDCCRT 0x4060044C /* Configuration register EPT */
#define UDCCRU 0x40600450 /* Configuration register EPU */
#define UDCCRV 0x40600454 /* Configuration register EPV */
#define UDCCRW 0x40600458 /* Configuration register EPW */
#define UDCCRX 0x4060045C /* Configuration register EPX */
#define UDCCONR_CN (0x03 << 25) /* Configuration Number */
#define UDCCONR_CN_S (25)
#define UDCCONR_IN (0x07 << 22) /* Interface Number */
#define UDCCONR_IN_S (22)
#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */
#define UDCCONR_AISN_S (19)
#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */
#define UDCCONR_EN_S (15)
#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */
#define UDCCONR_ET_S (13)
#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */
#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */
#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */
#define UDCCONR_ET_NU (0x00 << 13) /* Not used */
#define UDCCONR_ED (1 << 12) /* Endpoint Direction */
#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */
#define UDCCONR_MPS_S (2)
#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */
#define UDCCONR_EE (1 << 0) /* Endpoint Enable */
#define UDC_INT_FIFOERROR (0x2)
#define UDC_INT_PACKETCMP (0x1)
#define UDC_FNR_MASK (0x7ff)
#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST)
#define UDC_BCR_MASK (0x3ff)
#endif /* CONFIG_PXA27X */
#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
/******************************************************************************/
/*
* USB Host Controller
*/
#define OHCI_REGS_BASE 0x4C000000 /* required for ohci driver */
#define UHCREV 0x4C000000
#define UHCHCON 0x4C000004
#define UHCCOMS 0x4C000008
#define UHCINTS 0x4C00000C
#define UHCINTE 0x4C000010
#define UHCINTD 0x4C000014
#define UHCHCCA 0x4C000018
#define UHCPCED 0x4C00001C
#define UHCCHED 0x4C000020
#define UHCCCED 0x4C000024
#define UHCBHED 0x4C000028
#define UHCBCED 0x4C00002C
#define UHCDHEAD 0x4C000030
#define UHCFMI 0x4C000034
#define UHCFMR 0x4C000038
#define UHCFMN 0x4C00003C
#define UHCPERS 0x4C000040
#define UHCLST 0x4C000044
#define UHCRHDA 0x4C000048
#define UHCRHDB 0x4C00004C
#define UHCRHS 0x4C000050
#define UHCRHPS1 0x4C000054
#define UHCRHPS2 0x4C000058
#define UHCRHPS3 0x4C00005C
#define UHCSTAT 0x4C000060
#define UHCHR 0x4C000064
#define UHCHIE 0x4C000068
#define UHCHIT 0x4C00006C
#define UHCHR_FSBIR (1<<0)
#define UHCHR_FHR (1<<1)
#define UHCHR_CGR (1<<2)
#define UHCHR_SSDC (1<<3)
#define UHCHR_UIT (1<<4)
#define UHCHR_SSE (1<<5)
#define UHCHR_PSPL (1<<6)
#define UHCHR_PCPL (1<<7)
#define UHCHR_SSEP0 (1<<9)
#define UHCHR_SSEP1 (1<<10)
#define UHCHR_SSEP2 (1<<11)
#define UHCHIE_UPRIE (1<<13)
#define UHCHIE_UPS2IE (1<<12)
#define UHCHIE_UPS1IE (1<<11)
#define UHCHIE_TAIE (1<<10)
#define UHCHIE_HBAIE (1<<8)
#define UHCHIE_RWIE (1<<7)
#define UP2OCR 0x40600020
#define UP2OCR_HXOE (1<<17)
#define UP2OCR_HXS (1<<16)
#define UP2OCR_IDON (1<<10)
#define UP2OCR_EXSUS (1<<9)
#define UP2OCR_EXSP (1<<8)
#define UP2OCR_DMSTATE (1<<7)
#define UP2OCR_VPM (1<<6)
#define UP2OCR_DPSTATE (1<<5)
#define UP2OCR_DPPUE (1<<4)
#define UP2OCR_DMPDE (1<<3)
#define UP2OCR_DPPDE (1<<2)
#define UP2OCR_CPVPE (1<<1)
#define UP2OCR_CPVEN (1<<0)
#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
/******************************************************************************/
/*
* Fast Infrared Communication Port
*/
#define ICCR0 0x40800000 /* ICP Control Register 0 */
#define ICCR1 0x40800004 /* ICP Control Register 1 */
#define ICCR2 0x40800008 /* ICP Control Register 2 */
#define ICDR 0x4080000c /* ICP Data Register */
#define ICSR0 0x40800014 /* ICP Status Register 0 */
#define ICSR1 0x40800018 /* ICP Status Register 1 */
/*
* Real Time Clock
*/
#define RCNR 0x40900000 /* RTC Count Register */
#define RTAR 0x40900004 /* RTC Alarm Register */
#define RTSR 0x40900008 /* RTC Status Register */
#define RTTR 0x4090000C /* RTC Timer Trim Register */
#define RDAR1 0x40900018 /* Wristwatch Day Alarm Reg 1 */
#define RDAR2 0x40900020 /* Wristwatch Day Alarm Reg 2 */
#define RYAR1 0x4090001C /* Wristwatch Year Alarm Reg 1 */
#define RYAR2 0x40900024 /* Wristwatch Year Alarm Reg 2 */
#define SWAR1 0x4090002C /* Stopwatch Alarm Register 1 */
#define SWAR2 0x40900030 /* Stopwatch Alarm Register 2 */
#define PIAR 0x40900038 /* Periodic Interrupt Alarm Register */
#define RDCR 0x40900010 /* RTC Day Count Register. */
#define RYCR 0x40900014 /* RTC Year Count Register. */
#define SWCR 0x40900028 /* Stopwatch Count Register */
#define RTCPICR 0x40900034 /* Periodic Interrupt Counter Register */
#define RTSR_PICE (1 << 15) /* Peridoc interrupt count enable */
#define RTSR_PIALE (1 << 14) /* Peridoc interrupt Alarm enable */
#define RTSR_PIAL (1 << 13) /* Peridoc interrupt Alarm status */
#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
#define RTSR_AL (1 << 0) /* RTC alarm detected */
/******************************************************************************/
/*
* OS Timer & Match Registers
*/
#define OSMR0 0x40A00000 /* OS Timer Match Register 0 */
#define OSMR1 0x40A00004 /* OS Timer Match Register 1 */
#define OSMR2 0x40A00008 /* OS Timer Match Register 2 */
#define OSMR3 0x40A0000C /* OS Timer Match Register 3 */
#define OSCR 0x40A00010 /* OS Timer Counter Register */
#define OSSR 0x40A00014 /* OS Timer Status Register */
#define OWER 0x40A00018 /* OS Timer Watchdog Enable Register */
#define OIER 0x40A0001C /* OS Timer Interrupt Enable Register */
#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define OSCR4 0x40A00040 /* OS Timer Counter Register 4 */
#define OSCR5 0x40A00044 /* OS Timer Counter Register 5 */
#define OSCR6 0x40A00048 /* OS Timer Counter Register 6 */
#define OSCR7 0x40A0004C /* OS Timer Counter Register 7 */
#define OSCR8 0x40A00050 /* OS Timer Counter Register 8 */
#define OSCR9 0x40A00054 /* OS Timer Counter Register 9 */
#define OSCR10 0x40A00058 /* OS Timer Counter Register 10 */
#define OSCR11 0x40A0005C /* OS Timer Counter Register 11 */
#define OSMR4 0x40A00080 /* OS Timer Match Register 4 */
#define OSMR5 0x40A00084 /* OS Timer Match Register 5 */
#define OSMR6 0x40A00088 /* OS Timer Match Register 6 */
#define OSMR7 0x40A0008C /* OS Timer Match Register 7 */
#define OSMR8 0x40A00090 /* OS Timer Match Register 8 */
#define OSMR9 0x40A00094 /* OS Timer Match Register 9 */
#define OSMR10 0x40A00098 /* OS Timer Match Register 10 */
#define OSMR11 0x40A0009C /* OS Timer Match Register 11 */
#define OMCR4 0x40A000C0 /* OS Match Control Register 4 */
#define OMCR5 0x40A000C4 /* OS Match Control Register 5 */
#define OMCR6 0x40A000C8 /* OS Match Control Register 6 */
#define OMCR7 0x40A000CC /* OS Match Control Register 7 */
#define OMCR8 0x40A000D0 /* OS Match Control Register 8 */
#define OMCR9 0x40A000D4 /* OS Match Control Register 9 */
#define OMCR10 0x40A000D8 /* OS Match Control Register 10 */
#define OMCR11 0x40A000DC /* OS Match Control Register 11 */
#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
#define OSSR_M4 (1 << 4) /* Match status channel 4 */
#define OSSR_M3 (1 << 3) /* Match status channel 3 */
#define OSSR_M2 (1 << 2) /* Match status channel 2 */
#define OSSR_M1 (1 << 1) /* Match status channel 1 */
#define OSSR_M0 (1 << 0) /* Match status channel 0 */
#define OWER_WME (1 << 0) /* Watchdog Match Enable */
#define OIER_E4 (1 << 4) /* Interrupt enable channel 4 */
#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */
#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */
#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */
#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */
#define OSCR_CLK_FREQ 3250
/******************************************************************************/
/*
* Core Clock
*/
#if defined(CONFIG_CPU_MONAHANS)
#define ACCR 0x41340000 /* Application Subsystem Clock Configuration Register */
#define ACSR 0x41340004 /* Application Subsystem Clock Status Register */
#define AICSR 0x41340008 /* Application Subsystem Interrupt Control/Status Register */
#define CKENA 0x4134000C /* A Clock Enable Register */
#define CKENB 0x41340010 /* B Clock Enable Register */
#define AC97_DIV 0x41340014 /* AC97 clock divisor value register */
#define ACCR_SMC_MASK 0x03800000 /* Static Memory Controller Frequency Select */
#define ACCR_SRAM_MASK 0x000c0000 /* SRAM Controller Frequency Select */
#define ACCR_FC_MASK 0x00030000 /* Frequency Change Frequency Select */
#define ACCR_HSIO_MASK 0x0000c000 /* High Speed IO Frequency Select */
#define ACCR_DDR_MASK 0x00003000 /* DDR Memory Controller Frequency Select */
#define ACCR_XN_MASK 0x00000700 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
#define ACCR_XL_MASK 0x0000001f /* Crystal Frequency to Memory Frequency Multiplier */
#define ACCR_XPDIS (1 << 31)
#define ACCR_SPDIS (1 << 30)
#define ACCR_13MEND1 (1 << 27)
#define ACCR_D0CS (1 << 26)
#define ACCR_13MEND2 (1 << 21)
#define ACCR_PCCE (1 << 11)
#define CKENA_30_MSL0 (1 << 30) /* MSL0 Interface Unit Clock Enable */
#define CKENA_29_SSP4 (1 << 29) /* SSP3 Unit Clock Enable */
#define CKENA_28_SSP3 (1 << 28) /* SSP2 Unit Clock Enable */
#define CKENA_27_SSP2 (1 << 27) /* SSP1 Unit Clock Enable */
#define CKENA_26_SSP1 (1 << 26) /* SSP0 Unit Clock Enable */
#define CKENA_25_TSI (1 << 25) /* TSI Clock Enable */
#define CKENA_24_AC97 (1 << 24) /* AC97 Unit Clock Enable */
#define CKENA_23_STUART (1 << 23) /* STUART Unit Clock Enable */
#define CKENA_22_FFUART (1 << 22) /* FFUART Unit Clock Enable */
#define CKENA_21_BTUART (1 << 21) /* BTUART Unit Clock Enable */
#define CKENA_20_UDC (1 << 20) /* UDC Clock Enable */
#define CKENA_19_TPM (1 << 19) /* TPM Unit Clock Enable */
#define CKENA_18_USIM1 (1 << 18) /* USIM1 Unit Clock Enable */
#define CKENA_17_USIM0 (1 << 17) /* USIM0 Unit Clock Enable */
#define CKENA_15_CIR (1 << 15) /* Consumer IR Clock Enable */
#define CKENA_14_KEY (1 << 14) /* Keypad Controller Clock Enable */
#define CKENA_13_MMC1 (1 << 13) /* MMC1 Clock Enable */
#define CKENA_12_MMC0 (1 << 12) /* MMC0 Clock Enable */
#define CKENA_11_FLASH (1 << 11) /* Boot ROM Clock Enable */
#define CKENA_10_SRAM (1 << 10) /* SRAM Controller Clock Enable */
#define CKENA_9_SMC (1 << 9) /* Static Memory Controller */
#define CKENA_8_DMC (1 << 8) /* Dynamic Memory Controller */
#define CKENA_7_GRAPHICS (1 << 7) /* 2D Graphics Clock Enable */
#define CKENA_6_USBCLI (1 << 6) /* USB Client Unit Clock Enable */
#define CKENA_4_NAND (1 << 4) /* NAND Flash Controller Clock Enable */
#define CKENA_3_CAMERA (1 << 3) /* Camera Interface Clock Enable */
#define CKENA_2_USBHOST (1 << 2) /* USB Host Unit Clock Enable */
#define CKENA_1_LCD (1 << 1) /* LCD Unit Clock Enable */
#define CKENB_9_SYSBUS2 (1 << 9) /* System bus 2 */
#define CKENB_8_1WIRE (1 << 8) /* One Wire Interface Unit Clock Enable */
#define CKENB_7_GPIO (1 << 7) /* GPIO Clock Enable */
#define CKENB_6_IRQ (1 << 6) /* Interrupt Controller Clock Enable */
#define CKENB_4_I2C (1 << 4) /* I2C Unit Clock Enable */
#define CKENB_1_PWM1 (1 << 1) /* PWM2 & PWM3 Clock Enable */
#define CKENB_0_PWM0 (1 << 0) /* PWM0 & PWM1 Clock Enable */
#else /* if defined CONFIG_CPU_MONAHANS */
#define CCCR 0x41300000 /* Core Clock Configuration Register */
#define CKEN 0x41300004 /* Clock Enable Register */
#define OSCC 0x41300008 /* Oscillator Configuration Register */
#define CCSR 0x4130000C /* Core Clock Status Register */
#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */
#define CKEN22_MEMC (1 << 22) /* Memory Controler */
#define CKEN21_MSHC (1 << 21) /* Memery Stick Host Controller */
#define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */
#define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */
#define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */
#define CKEN17_MSL (1 << 17) /* MSL Interface Unit Clock Enable */
#define CKEN15_PWR_I2C (1 << 15) /* PWR_I2C Unit Clock Enable */
#define CKEN9_OST (1 << 9) /* OS Timer Unit Clock Enable */
#define CKEN4_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */
#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
#if !defined(CONFIG_PXA27X)
#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */
#endif
#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */
#define CKEN24_CAMERA (1 << 24) /* Camera Interface Clock Enable */
#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */
#define CKEN22_MEMC (1 << 22) /* Memory Controller Clock Enable */
#define CKEN21_MEMSTK (1 << 21) /* Memory Stick Host Controller */
#define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */
#define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */
#define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */
#define CKEN17_MSL (1 << 17) /* MSL Unit Clock Enable */
#define CKEN16_LCD (1 << 16) /* LCD Unit Clock Enable */
#define CKEN15_PWRI2C (1 << 15) /* PWR I2C Unit Clock Enable */
#define CKEN14_I2C (1 << 14) /* I2C Unit Clock Enable */
#define CKEN13_FICP (1 << 13) /* FICP Unit Clock Enable */
#define CKEN12_MMC (1 << 12) /* MMC Unit Clock Enable */
#define CKEN11_USB (1 << 11) /* USB Unit Clock Enable */
#if defined(CONFIG_PXA27X)
#define CKEN10_USBHOST (1 << 10) /* USB Host Unit Clock Enable */
#define CKEN24_CAMERA (1 << 24) /* Camera Unit Clock Enable */
#endif
#define CKEN8_I2S (1 << 8) /* I2S Unit Clock Enable */
#define CKEN7_BTUART (1 << 7) /* BTUART Unit Clock Enable */
#define CKEN6_FFUART (1 << 6) /* FFUART Unit Clock Enable */
#define CKEN5_STUART (1 << 5) /* STUART Unit Clock Enable */
#define CKEN3_SSP (1 << 3) /* SSP Unit Clock Enable */
#define CKEN2_AC97 (1 << 2) /* AC97 Unit Clock Enable */
#define CKEN1_PWM1 (1 << 1) /* PWM1 Clock Enable */
#define CKEN0_PWM0 (1 << 0) /* PWM0 Clock Enable */
#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
#if !defined(CONFIG_PXA27X)
#define CCCR_L09 (0x1F)
#define CCCR_L27 (0x1)
#define CCCR_L32 (0x2)
#define CCCR_L36 (0x3)
#define CCCR_L40 (0x4)
#define CCCR_L45 (0x5)
#define CCCR_M1 (0x1 << 5)
#define CCCR_M2 (0x2 << 5)
#define CCCR_M4 (0x3 << 5)
#define CCCR_N10 (0x2 << 7)
#define CCCR_N15 (0x3 << 7)
#define CCCR_N20 (0x4 << 7)
#define CCCR_N25 (0x5 << 7)
#define CCCR_N30 (0x6 << 7)
#endif
#endif /* CONFIG_CPU_MONAHANS */
/******************************************************************************/
/*
* Pulse Width Modulator
*/
#define PWM_CTRL0 0x40B00000 /* PWM 0 Control Register */
#define PWM_PWDUTY0 0x40B00004 /* PWM 0 Duty Cycle Register */
#define PWM_PERVAL0 0x40B00008 /* PWM 0 Period Control Register */
#define PWM_CTRL1 0x40C00000 /* PWM 1 Control Register */
#define PWM_PWDUTY1 0x40C00004 /* PWM 1 Duty Cycle Register */
#define PWM_PERVAL1 0x40C00008 /* PWM 1 Period Control Register */
#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define PWM_CTRL2 0x40B00010 /* PWM 2 Control Register */
#define PWM_PWDUTY2 0x40B00014 /* PWM 2 Duty Cycle Register */
#define PWM_PERVAL2 0x40B00018 /* PWM 2 Period Control Register */
#define PWM_CTRL3 0x40C00010 /* PWM 3 Control Register */
#define PWM_PWDUTY3 0x40C00014 /* PWM 3 Duty Cycle Register */
#define PWM_PERVAL3 0x40C00018 /* PWM 3 Period Control Register */
#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
/*
* Interrupt Controller
*/
#define ICIP 0x40D00000 /* Interrupt Controller IRQ Pending Register */
#define ICMR 0x40D00004 /* Interrupt Controller Mask Register */
#define ICLR 0x40D00008 /* Interrupt Controller Level Register */
#define ICFP 0x40D0000C /* Interrupt Controller FIQ Pending Register */
#define ICPR 0x40D00010 /* Interrupt Controller Pending Register */
#define ICCR 0x40D00014 /* Interrupt Controller Control Register */
#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define ICHP 0x40D00018 /* Interrupt Controller Highest Priority Register */
#define ICIP2 0x40D0009C /* Interrupt Controller IRQ Pending Register 2 */
#define ICMR2 0x40D000A0 /* Interrupt Controller Mask Register 2 */
#define ICLR2 0x40D000A4 /* Interrupt Controller Level Register 2 */
#define ICFP2 0x40D000A8 /* Interrupt Controller FIQ Pending Register 2 */
#define ICPR2 0x40D000AC /* Interrupt Controller Pending Register 2 */
#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
/******************************************************************************/
/*
* General Purpose I/O
*/
#define GPLR0 0x40E00000 /* GPIO Pin-Level Register GPIO<31:0> */
#define GPLR1 0x40E00004 /* GPIO Pin-Level Register GPIO<63:32> */
#define GPLR2 0x40E00008 /* GPIO Pin-Level Register GPIO<80:64> */
#define GPDR0 0x40E0000C /* GPIO Pin Direction Register GPIO<31:0> */
#define GPDR1 0x40E00010 /* GPIO Pin Direction Register GPIO<63:32> */
#define GPDR2 0x40E00014 /* GPIO Pin Direction Register GPIO<80:64> */
#define GPSR0 0x40E00018 /* GPIO Pin Output Set Register GPIO<31:0> */
#define GPSR1 0x40E0001C /* GPIO Pin Output Set Register GPIO<63:32> */
#define GPSR2 0x40E00020 /* GPIO Pin Output Set Register GPIO<80:64> */
#define GPCR0 0x40E00024 /* GPIO Pin Output Clear Register GPIO<31:0> */
#define GPCR1 0x40E00028 /* GPIO Pin Output Clear Register GPIO <63:32> */
#define GPCR2 0x40E0002C /* GPIO Pin Output Clear Register GPIO <80:64> */
#define GRER0 0x40E00030 /* GPIO Rising-Edge Detect Register GPIO<31:0> */
#define GRER1 0x40E00034 /* GPIO Rising-Edge Detect Register GPIO<63:32> */
#define GRER2 0x40E00038 /* GPIO Rising-Edge Detect Register GPIO<80:64> */
#define GFER0 0x40E0003C /* GPIO Falling-Edge Detect Register GPIO<31:0> */
#define GFER1 0x40E00040 /* GPIO Falling-Edge Detect Register GPIO<63:32> */
#define GFER2 0x40E00044 /* GPIO Falling-Edge Detect Register GPIO<80:64> */
#define GEDR0 0x40E00048 /* GPIO Edge Detect Status Register GPIO<31:0> */
#define GEDR1 0x40E0004C /* GPIO Edge Detect Status Register GPIO<63:32> */
#define GEDR2 0x40E00050 /* GPIO Edge Detect Status Register GPIO<80:64> */
#define GAFR0_L 0x40E00054 /* GPIO Alternate Function Select Register GPIO<15:0> */
#define GAFR0_U 0x40E00058 /* GPIO Alternate Function Select Register GPIO<31:16> */
#define GAFR1_L 0x40E0005C /* GPIO Alternate Function Select Register GPIO<47:32> */
#define GAFR1_U 0x40E00060 /* GPIO Alternate Function Select Register GPIO<63:48> */
#define GAFR2_L 0x40E00064 /* GPIO Alternate Function Select Register GPIO<79:64> */
#define GAFR2_U 0x40E00068 /* GPIO Alternate Function Select Register GPIO 80 */
#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define GPLR3 0x40E00100 /* GPIO Pin-Level Register GPIO<127:96> */
#define GPDR3 0x40E0010C /* GPIO Pin Direction Register GPIO<127:96> */
#define GPSR3 0x40E00118 /* GPIO Pin Output Set Register GPIO<127:96> */
#define GPCR3 0x40E00124 /* GPIO Pin Output Clear Register GPIO<127:96> */
#define GRER3 0x40E00130 /* GPIO Rising-Edge Detect Register GPIO<127:96> */
#define GFER3 0x40E0013C /* GPIO Falling-Edge Detect Register GPIO<127:96> */
#define GEDR3 0x40E00148 /* GPIO Edge Detect Status Register GPIO<127:96> */
#define GAFR3_L 0x40E0006C /* GPIO Alternate Function Select Register GPIO<111:96> */
#define GAFR3_U 0x40E00070 /* GPIO Alternate Function Select Register GPIO<127:112> */
#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
#ifdef CONFIG_CPU_MONAHANS
#define GSDR0 0x40E00400 /* Bit-wise Set of GPDR[31:0] */
#define GSDR1 0x40E00404 /* Bit-wise Set of GPDR[63:32] */
#define GSDR2 0x40E00408 /* Bit-wise Set of GPDR[95:64] */
#define GSDR3 0x40E0040C /* Bit-wise Set of GPDR[127:96] */
#define GCDR0 0x40E00420 /* Bit-wise Clear of GPDR[31:0] */
#define GCDR1 0x40E00424 /* Bit-wise Clear of GPDR[63:32] */
#define GCDR2 0x40E00428 /* Bit-wise Clear of GPDR[95:64] */
#define GCDR3 0x40E0042C /* Bit-wise Clear of GPDR[127:96] */
#define GSRER0 0x40E00440 /* Set Rising Edge Det. Enable [31:0] */
#define GSRER1 0x40E00444 /* Set Rising Edge Det. Enable [63:32] */
#define GSRER2 0x40E00448 /* Set Rising Edge Det. Enable [95:64] */
#define GSRER3 0x40E0044C /* Set Rising Edge Det. Enable [127:96] */
#define GCRER0 0x40E00460 /* Clear Rising Edge Det. Enable [31:0] */
#define GCRER1 0x40E00464 /* Clear Rising Edge Det. Enable [63:32] */
#define GCRER2 0x40E00468 /* Clear Rising Edge Det. Enable [95:64] */
#define GCRER3 0x40E0046C /* Clear Rising Edge Det. Enable[127:96] */
#define GSFER0 0x40E00480 /* Set Falling Edge Det. Enable [31:0] */
#define GSFER1 0x40E00484 /* Set Falling Edge Det. Enable [63:32] */
#define GSFER2 0x40E00488 /* Set Falling Edge Det. Enable [95:64] */
#define GSFER3 0x40E0048C /* Set Falling Edge Det. Enable[127:96] */
#define GCFER0 0x40E004A0 /* Clr Falling Edge Det. Enable [31:0] */
#define GCFER1 0x40E004A4 /* Clr Falling Edge Det. Enable [63:32] */
#define GCFER2 0x40E004A8 /* Clr Falling Edge Det. Enable [95:64] */
#define GCFER3 0x40E004AC /* Clr Falling Edge Det. Enable[127:96] */
#define GSDR(x) (0x40E00400 | ((x) & 0x60) >> 3)
#define GCDR(x) (0x40E00420 | ((x) & 0x60) >> 3)
#endif
#define _GPLR(x) (0x40E00000 + (((x) & 0x60) >> 3))
#define _GPDR(x) (0x40E0000C + (((x) & 0x60) >> 3))
#define _GPSR(x) (0x40E00018 + (((x) & 0x60) >> 3))
#define _GPCR(x) (0x40E00024 + (((x) & 0x60) >> 3))
#define _GRER(x) (0x40E00030 + (((x) & 0x60) >> 3))
#define _GFER(x) (0x40E0003C + (((x) & 0x60) >> 3))
#define _GEDR(x) (0x40E00048 + (((x) & 0x60) >> 3))
#define _GAFR(x) (0x40E00054 + (((x) & 0x70) >> 2))
#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define GPLR(x) (((((x) & 0x7f) < 96) ? _GPLR(x) : GPLR3))
#define GPDR(x) (((((x) & 0x7f) < 96) ? _GPDR(x) : GPDR3))
#define GPSR(x) (((((x) & 0x7f) < 96) ? _GPSR(x) : GPSR3))
#define GPCR(x) (((((x) & 0x7f) < 96) ? _GPCR(x) : GPCR3))
#define GRER(x) (((((x) & 0x7f) < 96) ? _GRER(x) : GRER3))
#define GFER(x) (((((x) & 0x7f) < 96) ? _GFER(x) : GFER3))
#define GEDR(x) (((((x) & 0x7f) < 96) ? _GEDR(x) : GEDR3))
#define GAFR(x) (((((x) & 0x7f) < 96) ? _GAFR(x) : \
((((x) & 0x7f) < 112) ? GAFR3_L : GAFR3_U)))
#else
#define GPLR(x) _GPLR(x)
#define GPDR(x) _GPDR(x)
#define GPSR(x) _GPSR(x)
#define GPCR(x) _GPCR(x)
#define GRER(x) _GRER(x)
#define GFER(x) _GFER(x)
#define GEDR(x) _GEDR(x)
#define GAFR(x) _GAFR(x)
#endif
#define GPIO_bit(x) (1 << ((x) & 0x1f))
/******************************************************************************/
/*
* Multi-function Pin Registers:
*/
/* PXA320 */
#if defined(CONFIG_CPU_PXA320)
#define DF_IO0 0x40e1024c
#define DF_IO1 0x40e10254
#define DF_IO2 0x40e1025c
#define DF_IO3 0x40e10264
#define DF_IO4 0x40e1026c
#define DF_IO5 0x40e10274
#define DF_IO6 0x40e1027c
#define DF_IO7 0x40e10284
#define DF_IO8 0x40e10250
#define DF_IO9 0x40e10258
#define DF_IO10 0x40e10260
#define DF_IO11 0x40e10268
#define DF_IO12 0x40e10270
#define DF_IO13 0x40e10278
#define DF_IO14 0x40e10280
#define DF_IO15 0x40e10288
#define DF_CLE_nOE 0x40e10204
#define DF_ALE_nWE1 0x40e10208
#define DF_ALE_nWE2 0x40e1021c
#define DF_SCLK_E 0x40e10210
#define DF_nCS0 0x40e10224
#define DF_nCS1 0x40e10228
#define nBE0 0x40e10214
#define nBE1 0x40e10218
#define nLUA 0x40e10234
#define nLLA 0x40e10238
#define DF_ADDR0 0x40e1023c
#define DF_ADDR1 0x40e10240
#define DF_ADDR2 0x40e10244
#define DF_ADDR3 0x40e10248
#define DF_INT_RnB 0x40e10220
#define DF_nCS0 0x40e10224
#define DF_nCS1 0x40e10228
#define DF_nWE 0x40e1022c
#define DF_nRE 0x40e10230
#define nXCVREN 0x40e10138
#define GPIO0 0x40e10124
#define GPIO1 0x40e10128
#define GPIO2 0x40e1012c
#define GPIO3 0x40e10130
#define GPIO4 0x40e10134
#define GPIO5 0x40e1028c
#define GPIO6 0x40e10290
#define GPIO7 0x40e10294
#define GPIO8 0x40e10298
#define GPIO9 0x40e1029c
#define GPIO10 0x40e10458
#define GPIO11 0x40e102a0
#define GPIO12 0x40e102a4
#define GPIO13 0x40e102a8
#define GPIO14 0x40e102ac
#define GPIO15 0x40e102b0
#define GPIO16 0x40e102b4
#define GPIO17 0x40e102b8
#define GPIO18 0x40e102bc
#define GPIO19 0x40e102c0
#define GPIO20 0x40e102c4
#define GPIO21 0x40e102c8
#define GPIO22 0x40e102cc
#define GPIO23 0x40e102d0
#define GPIO24 0x40e102d4
#define GPIO25 0x40e102d8
#define GPIO26 0x40e102dc
#define GPIO27 0x40e10400
#define GPIO28 0x40e10404
#define GPIO29 0x40e10408
#define GPIO30 0x40e1040c
#define GPIO31 0x40e10410
#define GPIO32 0x40e10414
#define GPIO33 0x40e10418
#define GPIO34 0x40e1041c
#define GPIO35 0x40e10420
#define GPIO36 0x40e10424
#define GPIO37 0x40e10428
#define GPIO38 0x40e1042c
#define GPIO39 0x40e10430
#define GPIO40 0x40e10434
#define GPIO41 0x40e10438
#define GPIO42 0x40e1043c
#define GPIO43 0x40e10440
#define GPIO44 0x40e10444
#define GPIO45 0x40e10448
#define GPIO46 0x40e1044c
#define GPIO47 0x40e10450
#define GPIO48 0x40e10454
#define GPIO49 0x40e1045c
#define GPIO50 0x40e10460
#define GPIO51 0x40e10464
#define GPIO52 0x40e10468
#define GPIO53 0x40e1046c
#define GPIO54 0x40e10470
#define GPIO55 0x40e10474
#define GPIO56 0x40e10478
#define GPIO57 0x40e1047c
#define GPIO58 0x40e10480
#define GPIO59 0x40e10484
#define GPIO60 0x40e10488
#define GPIO61 0x40e1048c
#define GPIO62 0x40e10490
#define GPIO6_2 0x40e10494
#define GPIO7_2 0x40e10498
#define GPIO8_2 0x40e1049c
#define GPIO9_2 0x40e104a0
#define GPIO10_2 0x40e104a4
#define GPIO11_2 0x40e104a8
#define GPIO12_2 0x40e104ac
#define GPIO13_2 0x40e104b0
#define GPIO63 0x40e104b4
#define GPIO64 0x40e104b8
#define GPIO65 0x40e104bc
#define GPIO66 0x40e104c0
#define GPIO67 0x40e104c4
#define GPIO68 0x40e104c8
#define GPIO69 0x40e104cc
#define GPIO70 0x40e104d0
#define GPIO71 0x40e104d4
#define GPIO72 0x40e104d8
#define GPIO73 0x40e104dc
#define GPIO14_2 0x40e104e0
#define GPIO15_2 0x40e104e4
#define GPIO16_2 0x40e104e8
#define GPIO17_2 0x40e104ec
#define GPIO74 0x40e104f0
#define GPIO75 0x40e104f4
#define GPIO76 0x40e104f8
#define GPIO77 0x40e104fc
#define GPIO78 0x40e10500
#define GPIO79 0x40e10504
#define GPIO80 0x40e10508
#define GPIO81 0x40e1050c
#define GPIO82 0x40e10510
#define GPIO83 0x40e10514
#define GPIO84 0x40e10518
#define GPIO85 0x40e1051c
#define GPIO86 0x40e10520
#define GPIO87 0x40e10524
#define GPIO88 0x40e10528
#define GPIO89 0x40e1052c
#define GPIO90 0x40e10530
#define GPIO91 0x40e10534
#define GPIO92 0x40e10538
#define GPIO93 0x40e1053c
#define GPIO94 0x40e10540
#define GPIO95 0x40e10544
#define GPIO96 0x40e10548
#define GPIO97 0x40e1054c
#define GPIO98 0x40e10550
#define GPIO99 0x40e10600
#define GPIO100 0x40e10604
#define GPIO101 0x40e10608
#define GPIO102 0x40e1060c
#define GPIO103 0x40e10610
#define GPIO104 0x40e10614
#define GPIO105 0x40e10618
#define GPIO106 0x40e1061c
#define GPIO107 0x40e10620
#define GPIO108 0x40e10624
#define GPIO109 0x40e10628
#define GPIO110 0x40e1062c
#define GPIO111 0x40e10630
#define GPIO112 0x40e10634
#define GPIO113 0x40e10638
#define GPIO114 0x40e1063c
#define GPIO115 0x40e10640
#define GPIO116 0x40e10644
#define GPIO117 0x40e10648
#define GPIO118 0x40e1064c
#define GPIO119 0x40e10650
#define GPIO120 0x40e10654
#define GPIO121 0x40e10658
#define GPIO122 0x40e1065c
#define GPIO123 0x40e10660
#define GPIO124 0x40e10664
#define GPIO125 0x40e10668
#define GPIO126 0x40e1066c
#define GPIO127 0x40e10670
#define GPIO0_2 0x40e10674
#define GPIO1_2 0x40e10678
#define GPIO2_2 0x40e1067c
#define GPIO3_2 0x40e10680
#define GPIO4_2 0x40e10684
#define GPIO5_2 0x40e10688
/* PXA300 and PXA310 */
#elif defined(CONFIG_CPU_PXA300) || defined(CONFIG_CPU_PXA310)
#define DF_IO0 0x40e10220
#define DF_IO1 0x40e10228
#define DF_IO2 0x40e10230
#define DF_IO3 0x40e10238
#define DF_IO4 0x40e10258
#define DF_IO5 0x40e10260
#define DF_IO7 0x40e10270
#define DF_IO6 0x40e10268
#define DF_IO8 0x40e10224
#define DF_IO9 0x40e1022c
#define DF_IO10 0x40e10234
#define DF_IO11 0x40e1023c
#define DF_IO12 0x40e1025c
#define DF_IO13 0x40e10264
#define DF_IO14 0x40e1026c
#define DF_IO15 0x40e10274
#define DF_CLE_NOE 0x40e10240
#define DF_ALE_nWE 0x40e1020c
#define DF_SCLK_E 0x40e10250
#define nCS0 0x40e100c4
#define nCS1 0x40e100c0
#define nBE0 0x40e10204
#define nBE1 0x40e10208
#define nLUA 0x40e10244
#define nLLA 0x40e10254
#define DF_ADDR0 0x40e10210
#define DF_ADDR1 0x40e10214
#define DF_ADDR2 0x40e10218
#define DF_ADDR3 0x40e1021c
#define DF_INT_RnB 0x40e100c8
#define DF_nCS0 0x40e10248
#define DF_nCS1 0x40e10278
#define DF_nWE 0x40e100cc
#define DF_nRE 0x40e10200
#define GPIO0 0x40e100b4
#define GPIO1 0x40e100b8
#define GPIO2 0x40e100bc
#define GPIO3 0x40e1027c
#define GPIO4 0x40e10280
#define GPIO5 0x40e10284
#define GPIO6 0x40e10288
#define GPIO7 0x40e1028c
#define GPIO8 0x40e10290
#define GPIO9 0x40e10294
#define GPIO10 0x40e10298
#define GPIO11 0x40e1029c
#define GPIO12 0x40e102a0
#define GPIO13 0x40e102a4
#define GPIO14 0x40e102a8
#define GPIO15 0x40e102ac
#define GPIO16 0x40e102b0
#define GPIO17 0x40e102b4
#define GPIO18 0x40e102b8
#define GPIO19 0x40e102bc
#define GPIO20 0x40e102c0
#define GPIO21 0x40e102c4
#define GPIO22 0x40e102c8
#define GPIO23 0x40e102cc
#define GPIO24 0x40e102d0
#define GPIO25 0x40e102d4
#define GPIO26 0x40e102d8
#define GPIO27 0x40e10400
#define GPIO28 0x40e10404
#define GPIO29 0x40e10408
#define ULPI_STP 0x40e1040c
#define ULPI_NXT 0x40e10410
#define ULPI_DIR 0x40e10414
#define GPIO30 0x40e10418
#define GPIO31 0x40e1041c
#define GPIO32 0x40e10420
#define GPIO33 0x40e10424
#define GPIO34 0x40e10428
#define GPIO35 0x40e1042c
#define GPIO36 0x40e10430
#define GPIO37 0x40e10434
#define GPIO38 0x40e10438
#define GPIO39 0x40e1043c
#define GPIO40 0x40e10440
#define GPIO41 0x40e10444
#define GPIO42 0x40e10448
#define GPIO43 0x40e1044c
#define GPIO44 0x40e10450
#define GPIO45 0x40e10454
#define GPIO46 0x40e10458
#define GPIO47 0x40e1045c
#define GPIO48 0x40e10460
#define GPIO49 0x40e10464
#define GPIO50 0x40e10468
#define GPIO51 0x40e1046c
#define GPIO52 0x40e10470
#define GPIO53 0x40e10474
#define GPIO54 0x40e10478
#define GPIO55 0x40e1047c
#define GPIO56 0x40e10480
#define GPIO57 0x40e10484
#define GPIO58 0x40e10488
#define GPIO59 0x40e1048c
#define GPIO60 0x40e10490
#define GPIO61 0x40e10494
#define GPIO62 0x40e10498
#define GPIO63 0x40e1049c
#define GPIO64 0x40e104a0
#define GPIO65 0x40e104a4
#define GPIO66 0x40e104a8
#define GPIO67 0x40e104ac
#define GPIO68 0x40e104b0
#define GPIO69 0x40e104b4
#define GPIO70 0x40e104b8
#define GPIO71 0x40e104bc
#define GPIO72 0x40e104c0
#define GPIO73 0x40e104c4
#define GPIO74 0x40e104c8
#define GPIO75 0x40e104cc
#define GPIO76 0x40e104d0
#define GPIO77 0x40e104d4
#define GPIO78 0x40e104d8
#define GPIO79 0x40e104dc
#define GPIO80 0x40e104e0
#define GPIO81 0x40e104e4
#define GPIO82 0x40e104e8
#define GPIO83 0x40e104ec
#define GPIO84 0x40e104f0
#define GPIO85 0x40e104f4
#define GPIO86 0x40e104f8
#define GPIO87 0x40e104fc
#define GPIO88 0x40e10500
#define GPIO89 0x40e10504
#define GPIO90 0x40e10508
#define GPIO91 0x40e1050c
#define GPIO92 0x40e10510
#define GPIO93 0x40e10514
#define GPIO94 0x40e10518
#define GPIO95 0x40e1051c
#define GPIO96 0x40e10520
#define GPIO97 0x40e10524
#define GPIO98 0x40e10528
#define GPIO99 0x40e10600
#define GPIO100 0x40e10604
#define GPIO101 0x40e10608
#define GPIO102 0x40e1060c
#define GPIO103 0x40e10610
#define GPIO104 0x40e10614
#define GPIO105 0x40e10618
#define GPIO106 0x40e1061c
#define GPIO107 0x40e10620
#define GPIO108 0x40e10624
#define GPIO109 0x40e10628
#define GPIO110 0x40e1062c
#define GPIO111 0x40e10630
#define GPIO112 0x40e10634
#define GPIO113 0x40e10638
#define GPIO114 0x40e1063c
#define GPIO115 0x40e10640
#define GPIO116 0x40e10644
#define GPIO117 0x40e10648
#define GPIO118 0x40e1064c
#define GPIO119 0x40e10650
#define GPIO120 0x40e10654
#define GPIO121 0x40e10658
#define GPIO122 0x40e1065c
#define GPIO123 0x40e10660
#define GPIO124 0x40e10664
#define GPIO125 0x40e10668
#define GPIO126 0x40e1066c
#define GPIO127 0x40e10670
#define GPIO0_2 0x40e10674
#define GPIO1_2 0x40e10678
#define GPIO2_2 0x40e102dc
#define GPIO3_2 0x40e102e0
#define GPIO4_2 0x40e102e4
#define GPIO5_2 0x40e102e8
#define GPIO6_2 0x40e102ec
#ifndef CONFIG_CPU_PXA300 /* PXA310 only */
#define GPIO7_2 0x40e1052c
#define GPIO8_2 0x40e10530
#define GPIO9_2 0x40e10534
#define GPIO10_2 0x40e10538
#endif
#endif
#ifdef CONFIG_CPU_MONAHANS
/* MFPR Bit Definitions, see 4-10, Vol. 1 */
#define PULL_SEL 0x8000
#define PULLUP_EN 0x4000
#define PULLDOWN_EN 0x2000
#define DRIVE_FAST_1mA 0x0
#define DRIVE_FAST_2mA 0x400
#define DRIVE_FAST_3mA 0x800
#define DRIVE_FAST_4mA 0xC00
#define DRIVE_SLOW_6mA 0x1000
#define DRIVE_FAST_6mA 0x1400
#define DRIVE_SLOW_10mA 0x1800
#define DRIVE_FAST_10mA 0x1C00
#define SLEEP_SEL 0x200
#define SLEEP_DATA 0x100
#define SLEEP_OE_N 0x80
#define EDGE_CLEAR 0x40
#define EDGE_FALL_EN 0x20
#define EDGE_RISE_EN 0x10
#define AF_SEL_0 0x0 /* Alternate function 0 (reset state) */
#define AF_SEL_1 0x1 /* Alternate function 1 */
#define AF_SEL_2 0x2 /* Alternate function 2 */
#define AF_SEL_3 0x3 /* Alternate function 3 */
#define AF_SEL_4 0x4 /* Alternate function 4 */
#define AF_SEL_5 0x5 /* Alternate function 5 */
#define AF_SEL_6 0x6 /* Alternate function 6 */
#define AF_SEL_7 0x7 /* Alternate function 7 */
#endif /* CONFIG_CPU_MONAHANS */
/* GPIO alternate function assignments */
#define GPIO1_RST 1 /* reset */
#define GPIO6_MMCCLK 6 /* MMC Clock */
#define GPIO8_48MHz 7 /* 48 MHz clock output */
#define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */
#define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */
#define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */
#define GPIO11_3_6MHz 11 /* 3.6 MHz oscillator out */
#define GPIO12_32KHz 12 /* 32 kHz out */
#define GPIO13_MBGNT 13 /* memory controller grant */
#define GPIO14_MBREQ 14 /* alternate bus master request */
#define GPIO15_nCS_1 15 /* chip select 1 */
#define GPIO16_PWM0 16 /* PWM0 output */
#define GPIO17_PWM1 17 /* PWM1 output */
#define GPIO18_RDY 18 /* Ext. Bus Ready */
#define GPIO19_DREQ1 19 /* External DMA Request */
#define GPIO20_DREQ0 20 /* External DMA Request */
#define GPIO23_SCLK 23 /* SSP clock */
#define GPIO24_SFRM 24 /* SSP Frame */
#define GPIO25_STXD 25 /* SSP transmit */
#define GPIO26_SRXD 26 /* SSP receive */
#define GPIO27_SEXTCLK 27 /* SSP ext_clk */
#define GPIO28_BITCLK 28 /* AC97/I2S bit_clk */
#define GPIO29_SDATA_IN 29 /* AC97 Sdata_in0 / I2S Sdata_in */
#define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */
#define GPIO31_SYNC 31 /* AC97/I2S sync */
#define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */
#define GPIO33_nCS_5 33 /* chip select 5 */
#define GPIO34_FFRXD 34 /* FFUART receive */
#define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */
#define GPIO35_FFCTS 35 /* FFUART Clear to send */
#define GPIO36_FFDCD 36 /* FFUART Data carrier detect */
#define GPIO37_FFDSR 37 /* FFUART data set ready */
#define GPIO38_FFRI 38 /* FFUART Ring Indicator */
#define GPIO39_MMCCS1 39 /* MMC Chip Select 1 */
#define GPIO39_FFTXD 39 /* FFUART transmit data */
#define GPIO40_FFDTR 40 /* FFUART data terminal Ready */
#define GPIO41_FFRTS 41 /* FFUART request to send */
#define GPIO42_BTRXD 42 /* BTUART receive data */
#define GPIO43_BTTXD 43 /* BTUART transmit data */
#define GPIO44_BTCTS 44 /* BTUART clear to send */
#define GPIO45_BTRTS 45 /* BTUART request to send */
#define GPIO46_ICPRXD 46 /* ICP receive data */
#define GPIO46_STRXD 46 /* STD_UART receive data */
#define GPIO47_ICPTXD 47 /* ICP transmit data */
#define GPIO47_STTXD 47 /* STD_UART transmit data */
#define GPIO48_nPOE 48 /* Output Enable for Card Space */
#define GPIO49_nPWE 49 /* Write Enable for Card Space */
#define GPIO50_nPIOR 50 /* I/O Read for Card Space */
#define GPIO51_nPIOW 51 /* I/O Write for Card Space */
#define GPIO52_nPCE_1 52 /* Card Enable for Card Space */
#define GPIO53_nPCE_2 53 /* Card Enable for Card Space */
#define GPIO53_MMCCLK 53 /* MMC Clock */
#define GPIO54_MMCCLK 54 /* MMC Clock */
#define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */
#define GPIO55_nPREG 55 /* Card Address bit 26 */
#define GPIO56_nPWAIT 56 /* Wait signal for Card Space */
#define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */
#define GPIO58_LDD_0 58 /* LCD data pin 0 */
#define GPIO59_LDD_1 59 /* LCD data pin 1 */
#define GPIO60_LDD_2 60 /* LCD data pin 2 */
#define GPIO61_LDD_3 61 /* LCD data pin 3 */
#define GPIO62_LDD_4 62 /* LCD data pin 4 */
#define GPIO63_LDD_5 63 /* LCD data pin 5 */
#define GPIO64_LDD_6 64 /* LCD data pin 6 */
#define GPIO65_LDD_7 65 /* LCD data pin 7 */
#define GPIO66_LDD_8 66 /* LCD data pin 8 */
#define GPIO66_MBREQ 66 /* alternate bus master req */
#define GPIO67_LDD_9 67 /* LCD data pin 9 */
#define GPIO67_MMCCS0 67 /* MMC Chip Select 0 */
#define GPIO68_LDD_10 68 /* LCD data pin 10 */
#define GPIO68_MMCCS1 68 /* MMC Chip Select 1 */
#define GPIO69_LDD_11 69 /* LCD data pin 11 */
#define GPIO69_MMCCLK 69 /* MMC_CLK */
#define GPIO70_LDD_12 70 /* LCD data pin 12 */
#define GPIO70_RTCCLK 70 /* Real Time clock (1 Hz) */
#define GPIO71_LDD_13 71 /* LCD data pin 13 */
#define GPIO71_3_6MHz 71 /* 3.6 MHz Oscillator clock */
#define GPIO72_LDD_14 72 /* LCD data pin 14 */
#define GPIO72_32kHz 72 /* 32 kHz clock */
#define GPIO73_LDD_15 73 /* LCD data pin 15 */
#define GPIO73_MBGNT 73 /* Memory controller grant */
#define GPIO74_LCD_FCLK 74 /* LCD Frame clock */
#define GPIO75_LCD_LCLK 75 /* LCD line clock */
#define GPIO76_LCD_PCLK 76 /* LCD Pixel clock */
#define GPIO77_LCD_ACBIAS 77 /* LCD AC Bias */
#define GPIO78_nCS_2 78 /* chip select 2 */
#define GPIO79_nCS_3 79 /* chip select 3 */
#define GPIO80_nCS_4 80 /* chip select 4 */
/* GPIO alternate function mode & direction */
#define GPIO_IN 0x000
#define GPIO_OUT 0x080
#define GPIO_ALT_FN_1_IN 0x100
#define GPIO_ALT_FN_1_OUT 0x180
#define GPIO_ALT_FN_2_IN 0x200
#define GPIO_ALT_FN_2_OUT 0x280
#define GPIO_ALT_FN_3_IN 0x300
#define GPIO_ALT_FN_3_OUT 0x380
#define GPIO_MD_MASK_NR 0x07f
#define GPIO_MD_MASK_DIR 0x080
#define GPIO_MD_MASK_FN 0x300
#define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN)
#define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT)
#define GPIO8_48MHz_MD ( 8 | GPIO_ALT_FN_1_OUT)
#define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT)
#define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT)
#define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT)
#define GPIO11_3_6MHz_MD (11 | GPIO_ALT_FN_1_OUT)
#define GPIO12_32KHz_MD (12 | GPIO_ALT_FN_1_OUT)
#define GPIO13_MBGNT_MD (13 | GPIO_ALT_FN_2_OUT)
#define GPIO14_MBREQ_MD (14 | GPIO_ALT_FN_1_IN)
#define GPIO15_nCS_1_MD (15 | GPIO_ALT_FN_2_OUT)
#define GPIO16_PWM0_MD (16 | GPIO_ALT_FN_2_OUT)
#define GPIO17_PWM1_MD (17 | GPIO_ALT_FN_2_OUT)
#define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN)
#define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN)
#define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN)
#define GPIO23_SCLK_md (23 | GPIO_ALT_FN_2_OUT)
#define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT)
#define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT)
#define GPIO26_SRXD_MD (26 | GPIO_ALT_FN_1_IN)
#define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN)
#define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN)
#define GPIO28_BITCLK_I2S_MD (28 | GPIO_ALT_FN_2_IN)
#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN)
#define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN)
#define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT)
#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT)
#define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT)
#define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT)
#define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN)
#define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT)
#define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN)
#define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT)
#define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN)
#define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN)
#define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN)
#define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN)
#define GPIO39_MMCCS1_MD (39 | GPIO_ALT_FN_1_OUT)
#define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT)
#define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT)
#define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT)
#define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN)
#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT)
#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN)
#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT)
#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN)
#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN)
#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT)
#define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT)
#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT)
#define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT)
#define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT)
#define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT)
#define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT)
#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT)
#define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT)
#define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT)
#define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT)
#define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT)
#define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN)
#define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN)
#define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT)
#define GPIO59_LDD_1_MD (59 | GPIO_ALT_FN_2_OUT)
#define GPIO60_LDD_2_MD (60 | GPIO_ALT_FN_2_OUT)
#define GPIO61_LDD_3_MD (61 | GPIO_ALT_FN_2_OUT)
#define GPIO62_LDD_4_MD (62 | GPIO_ALT_FN_2_OUT)
#define GPIO63_LDD_5_MD (63 | GPIO_ALT_FN_2_OUT)
#define GPIO64_LDD_6_MD (64 | GPIO_ALT_FN_2_OUT)
#define GPIO65_LDD_7_MD (65 | GPIO_ALT_FN_2_OUT)
#define GPIO66_LDD_8_MD (66 | GPIO_ALT_FN_2_OUT)
#define GPIO66_MBREQ_MD (66 | GPIO_ALT_FN_1_IN)
#define GPIO67_LDD_9_MD (67 | GPIO_ALT_FN_2_OUT)
#define GPIO67_MMCCS0_MD (67 | GPIO_ALT_FN_1_OUT)
#define GPIO68_LDD_10_MD (68 | GPIO_ALT_FN_2_OUT)
#define GPIO68_MMCCS1_MD (68 | GPIO_ALT_FN_1_OUT)
#define GPIO69_LDD_11_MD (69 | GPIO_ALT_FN_2_OUT)
#define GPIO69_MMCCLK_MD (69 | GPIO_ALT_FN_1_OUT)
#define GPIO70_LDD_12_MD (70 | GPIO_ALT_FN_2_OUT)
#define GPIO70_RTCCLK_MD (70 | GPIO_ALT_FN_1_OUT)
#define GPIO71_LDD_13_MD (71 | GPIO_ALT_FN_2_OUT)
#define GPIO71_3_6MHz_MD (71 | GPIO_ALT_FN_1_OUT)
#define GPIO72_LDD_14_MD (72 | GPIO_ALT_FN_2_OUT)
#define GPIO72_32kHz_MD (72 | GPIO_ALT_FN_1_OUT)
#define GPIO73_LDD_15_MD (73 | GPIO_ALT_FN_2_OUT)
#define GPIO73_MBGNT_MD (73 | GPIO_ALT_FN_1_OUT)
#define GPIO74_LCD_FCLK_MD (74 | GPIO_ALT_FN_2_OUT)
#define GPIO75_LCD_LCLK_MD (75 | GPIO_ALT_FN_2_OUT)
#define GPIO76_LCD_PCLK_MD (76 | GPIO_ALT_FN_2_OUT)
#define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT)
#define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT)
#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT)
#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT)
#define GPIO117_SCL (117 | GPIO_ALT_FN_1_OUT)
#define GPIO118_SDA (118 | GPIO_ALT_FN_1_OUT)
/*
* Power Manager
*/
#ifdef CONFIG_CPU_MONAHANS
#define ASCR 0x40F40000 /* Application Subsystem Power Status/Control Register */
#define ARSR 0x40F40004 /* Application Subsystem Reset Status Register */
#define AD3ER 0x40F40008 /* Application Subsystem D3 state Wakeup Enable Register */
#define AD3SR 0x40F4000C /* Application Subsystem D3 state Wakeup Status Register */
#define AD2D0ER 0x40F40010 /* Application Subsystem D2 to D0 state Wakeup Enable Register */
#define AD2D0SR 0x40F40014 /* Application Subsystem D2 to D0 state Wakeup Status Register */
#define AD2D1ER 0x40F40018 /* Application Subsystem D2 to D1 state Wakeup Enable Register */
#define AD2D1SR 0x40F4001C /* Application Subsystem D2 to D1 state Wakeup Status Register */
#define AD1D0ER 0x40F40020 /* Application Subsystem D1 to D0 state Wakeup Enable Register */
#define AD1D0SR 0x40F40024 /* Application Subsystem D1 to D0 state Wakeup Status Register */
#define ASDCNT 0x40F40028 /* Application Subsystem SRAM Drowsy Count Register */
#define AD3R 0x40F40030 /* Application Subsystem D3 State Configuration Register */
#define AD2R 0x40F40034 /* Application Subsystem D2 State Configuration Register */
#define AD1R 0x40F40038 /* Application Subsystem D1 State Configuration Register */
#define PMCR 0x40F50000 /* Power Manager Control Register */
#define PSR 0x40F50004 /* Power Manager S2 Status Register */
#define PSPR 0x40F50008 /* Power Manager Scratch Pad Register */
#define PCFR 0x40F5000C /* Power Manager General Configuration Register */
#define PWER 0x40F50010 /* Power Manager Wake-up Enable Register */
#define PWSR 0x40F50014 /* Power Manager Wake-up Status Register */
#define PECR 0x40F50018 /* Power Manager EXT_WAKEUP[1:0] Control Register */
#define DCDCSR 0x40F50080 /* DC-DC Controller Status Register */
#define PVCR 0x40F50100 /* Power Manager Voltage Change Control Register */
#define PCMD(x) (0x40F50110 + x*4)
#define PCMD0 (0x40F50110 + 0 * 4)
#define PCMD1 (0x40F50110 + 1 * 4)
#define PCMD2 (0x40F50110 + 2 * 4)
#define PCMD3 (0x40F50110 + 3 * 4)
#define PCMD4 (0x40F50110 + 4 * 4)
#define PCMD5 (0x40F50110 + 5 * 4)
#define PCMD6 (0x40F50110 + 6 * 4)
#define PCMD7 (0x40F50110 + 7 * 4)
#define PCMD8 (0x40F50110 + 8 * 4)
#define PCMD9 (0x40F50110 + 9 * 4)
#define PCMD10 (0x40F50110 + 10 * 4)
#define PCMD11 (0x40F50110 + 11 * 4)
#define PCMD12 (0x40F50110 + 12 * 4)
#define PCMD13 (0x40F50110 + 13 * 4)
#define PCMD14 (0x40F50110 + 14 * 4)
#define PCMD15 (0x40F50110 + 15 * 4)
#define PCMD16 (0x40F50110 + 16 * 4)
#define PCMD17 (0x40F50110 + 17 * 4)
#define PCMD18 (0x40F50110 + 18 * 4)
#define PCMD19 (0x40F50110 + 19 * 4)
#define PCMD20 (0x40F50110 + 20 * 4)
#define PCMD21 (0x40F50110 + 21 * 4)
#define PCMD22 (0x40F50110 + 22 * 4)
#define PCMD23 (0x40F50110 + 23 * 4)
#define PCMD24 (0x40F50110 + 24 * 4)
#define PCMD25 (0x40F50110 + 25 * 4)
#define PCMD26 (0x40F50110 + 26 * 4)
#define PCMD27 (0x40F50110 + 27 * 4)
#define PCMD28 (0x40F50110 + 28 * 4)
#define PCMD29 (0x40F50110 + 29 * 4)
#define PCMD30 (0x40F50110 + 30 * 4)
#define PCMD31 (0x40F50110 + 31 * 4)
#define PCMD_MBC (1<<12)
#define PCMD_DCE (1<<11)
#define PCMD_LC (1<<10)
#define PCMD_SQC (3<<8) /* only 00 and 01 are valid */
#define PVCR_FVC (0x1 << 28)
#define PVCR_VCSA (0x1<<14)
#define PVCR_CommandDelay (0xf80)
#define PVCR_ReadPointer 0x01f00000
#define PVCR_SlaveAddress (0x7f)
#else /* ifdef CONFIG_CPU_MONAHANS */
#define PMCR 0x40F00000 /* Power Manager Control Register */
#define PSSR 0x40F00004 /* Power Manager Sleep Status Register */
#define PSPR 0x40F00008 /* Power Manager Scratch Pad Register */
#define PWER 0x40F0000C /* Power Manager Wake-up Enable Register */
#define PRER 0x40F00010 /* Power Manager GPIO Rising-Edge Detect Enable Register */
#define PFER 0x40F00014 /* Power Manager GPIO Falling-Edge Detect Enable Register */
#define PEDR 0x40F00018 /* Power Manager GPIO Edge Detect Status Register */
#define PCFR 0x40F0001C /* Power Manager General Configuration Register */
#define PGSR0 0x40F00020 /* Power Manager GPIO Sleep State Register for GP[31-0] */
#define PGSR1 0x40F00024 /* Power Manager GPIO Sleep State Register for GP[63-32] */
#define PGSR2 0x40F00028 /* Power Manager GPIO Sleep State Register for GP[84-64] */
#define PGSR3 0x40F0002C /* Power Manager GPIO Sleep State Register for GP[118-96] */
#define RCSR 0x40F00030 /* Reset Controller Status Register */
#define PSLR 0x40F00034 /* Power Manager Sleep Config Register */
#define PSTR 0x40F00038 /* Power Manager Standby Config Register */
#define PSNR 0x40F0003C /* Power Manager Sense Config Register */
#define PVCR 0x40F00040 /* Power Manager VoltageControl Register */
#define PKWR 0x40F00050 /* Power Manager KB Wake-up Enable Reg */
#define PKSR 0x40F00054 /* Power Manager KB Level-Detect Register */
#define PCMD(x) (0x40F00080 + x*4)
#define PCMD0 (0x40F00080 + 0 * 4)
#define PCMD1 (0x40F00080 + 1 * 4)
#define PCMD2 (0x40F00080 + 2 * 4)
#define PCMD3 (0x40F00080 + 3 * 4)
#define PCMD4 (0x40F00080 + 4 * 4)
#define PCMD5 (0x40F00080 + 5 * 4)
#define PCMD6 (0x40F00080 + 6 * 4)
#define PCMD7 (0x40F00080 + 7 * 4)
#define PCMD8 (0x40F00080 + 8 * 4)
#define PCMD9 (0x40F00080 + 9 * 4)
#define PCMD10 (0x40F00080 + 10 * 4)
#define PCMD11 (0x40F00080 + 11 * 4)
#define PCMD12 (0x40F00080 + 12 * 4)
#define PCMD13 (0x40F00080 + 13 * 4)
#define PCMD14 (0x40F00080 + 14 * 4)
#define PCMD15 (0x40F00080 + 15 * 4)
#define PCMD16 (0x40F00080 + 16 * 4)
#define PCMD17 (0x40F00080 + 17 * 4)
#define PCMD18 (0x40F00080 + 18 * 4)
#define PCMD19 (0x40F00080 + 19 * 4)
#define PCMD20 (0x40F00080 + 20 * 4)
#define PCMD21 (0x40F00080 + 21 * 4)
#define PCMD22 (0x40F00080 + 22 * 4)
#define PCMD23 (0x40F00080 + 23 * 4)
#define PCMD24 (0x40F00080 + 24 * 4)
#define PCMD25 (0x40F00080 + 25 * 4)
#define PCMD26 (0x40F00080 + 26 * 4)
#define PCMD27 (0x40F00080 + 27 * 4)
#define PCMD28 (0x40F00080 + 28 * 4)
#define PCMD29 (0x40F00080 + 29 * 4)
#define PCMD30 (0x40F00080 + 30 * 4)
#define PCMD31 (0x40F00080 + 31 * 4)
#define PCMD_MBC (1<<12)
#define PCMD_DCE (1<<11)
#define PCMD_LC (1<<10)
/* FIXME: PCMD_SQC need be checked. */
#define PCMD_SQC (3<<8) /* currently only bit 8 is changerable, */
/* bit 9 should be 0 all day. */
#define PVCR_VCSA (0x1<<14)
#define PVCR_CommandDelay (0xf80)
/* define MACRO for Power Manager General Configuration Register (PCFR) */
#define PCFR_FVC (0x1 << 10)
#define PCFR_PI2C_EN (0x1 << 6)
#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */
#define PSSR_RDH (1 << 5) /* Read Disable Hold */
#define PSSR_PH (1 << 4) /* Peripheral Control Hold */
#define PSSR_VFS (1 << 2) /* VDD Fault Status */
#define PSSR_BFS (1 << 1) /* Battery Fault Status */
#define PSSR_SSS (1 << 0) /* Software Sleep Status */
#define PCFR_DS (1 << 3) /* Deep Sleep Mode */
#define PCFR_FS (1 << 2) /* Float Static Chip Selects */
#define PCFR_FP (1 << 1) /* Float PCMCIA controls */
#define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */
#define RCSR_GPR (1 << 3) /* GPIO Reset */
#define RCSR_SMR (1 << 2) /* Sleep Mode */
#define RCSR_WDR (1 << 1) /* Watchdog Reset */
#define RCSR_HWR (1 << 0) /* Hardware Reset */
#endif /* CONFIG_CPU_MONAHANS */
/*
* SSP Serial Port Registers
*/
#define SSCR0 0x41000000 /* SSP Control Register 0 */
#define SSCR1 0x41000004 /* SSP Control Register 1 */
#define SSSR 0x41000008 /* SSP Status Register */
#define SSITR 0x4100000C /* SSP Interrupt Test Register */
#define SSDR 0x41000010 /* (Write / Read) SSP Data Write Register/SSP Data Read Register */
/*
* MultiMediaCard (MMC) controller
*/
#define MMC_STRPCL 0x41100000 /* Control to start and stop MMC clock */
#define MMC_STAT 0x41100004 /* MMC Status Register (read only) */
#define MMC_CLKRT 0x41100008 /* MMC clock rate */
#define MMC_SPI 0x4110000c /* SPI mode control bits */
#define MMC_CMDAT 0x41100010 /* Command/response/data sequence control */
#define MMC_RESTO 0x41100014 /* Expected response time out */
#define MMC_RDTO 0x41100018 /* Expected data read time out */
#define MMC_BLKLEN 0x4110001c /* Block length of data transaction */
#define MMC_NOB 0x41100020 /* Number of blocks, for block mode */
#define MMC_PRTBUF 0x41100024 /* Partial MMC_TXFIFO FIFO written */
#define MMC_I_MASK 0x41100028 /* Interrupt Mask */
#define MMC_I_REG 0x4110002c /* Interrupt Register (read only) */
#define MMC_CMD 0x41100030 /* Index of current command */
#define MMC_ARGH 0x41100034 /* MSW part of the current command argument */
#define MMC_ARGL 0x41100038 /* LSW part of the current command argument */
#define MMC_RES 0x4110003c /* Response FIFO (read only) */
#define MMC_RXFIFO 0x41100040 /* Receive FIFO (read only) */
#define MMC_TXFIFO 0x41100044 /* Transmit FIFO (write only) */
/*
* LCD
*/
#define LCCR0 0x44000000 /* LCD Controller Control Register 0 */
#define LCCR1 0x44000004 /* LCD Controller Control Register 1 */
#define LCCR2 0x44000008 /* LCD Controller Control Register 2 */
#define LCCR3 0x4400000C /* LCD Controller Control Register 3 */
#define DFBR0 0x44000020 /* DMA Channel 0 Frame Branch Register */
#define DFBR1 0x44000024 /* DMA Channel 1 Frame Branch Register */
#define LCSR0 0x44000038 /* LCD Controller Status Register */
#define LCSR1 0x44000034 /* LCD Controller Status Register */
#define LIIDR 0x4400003C /* LCD Controller Interrupt ID Register */
#define TMEDRGBR 0x44000040 /* TMED RGB Seed Register */
#define TMEDCR 0x44000044 /* TMED Control Register */
#define FDADR0 0x44000200 /* DMA Channel 0 Frame Descriptor Address Register */
#define FSADR0 0x44000204 /* DMA Channel 0 Frame Source Address Register */
#define FIDR0 0x44000208 /* DMA Channel 0 Frame ID Register */
#define LDCMD0 0x4400020C /* DMA Channel 0 Command Register */
#define FDADR1 0x44000210 /* DMA Channel 1 Frame Descriptor Address Register */
#define FSADR1 0x44000214 /* DMA Channel 1 Frame Source Address Register */
#define FIDR1 0x44000218 /* DMA Channel 1 Frame ID Register */
#define LDCMD1 0x4400021C /* DMA Channel 1 Command Register */
#define LCCR0_ENB (1 << 0) /* LCD Controller enable */
#define LCCR0_CMS (1 << 1) /* Color = 0, Monochrome = 1 */
#define LCCR0_SDS (1 << 2) /* Single Panel = 0, Dual Panel = 1 */
#define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */
#define LCCR0_SFM (1 << 4) /* Start of frame mask */
#define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */
#define LCCR0_EFM (1 << 6) /* End of Frame mask */
#define LCCR0_PAS (1 << 7) /* Passive = 0, Active = 1 */
#define LCCR0_BLE (1 << 8) /* Little Endian = 0, Big Endian = 1 */
#define LCCR0_DPD (1 << 9) /* Double Pixel mode, 4 pixel value = 0, 8 pixle values = 1 */
#define LCCR0_DIS (1 << 10) /* LCD Disable */
#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */
#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */
#define LCCR0_PDD_S 12
#define LCCR0_BM (1 << 20) /* Branch mask */
#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */
#if defined(CONFIG_PXA27X)
#define LCCR0_LCDT (1 << 22) /* LCD Panel Type */
#define LCCR0_RDSTM (1 << 23) /* Read Status Interrupt Mask */
#define LCCR0_CMDIM (1 << 24) /* Command Interrupt Mask */
#endif
#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */
#define LCCR1_DisWdth(Pixel) /* Display Width [1..800 pix.] */ \
(((Pixel) - 1) << FShft (LCCR1_PPL))
#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */
#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \
/* pulse Width [1..64 Tpix] */ \
(((Tpix) - 1) << FShft (LCCR1_HSW))
#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */
/* count - 1 [Tpix] */
#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \
/* [1..256 Tpix] */ \
(((Tpix) - 1) << FShft (LCCR1_ELW))
#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */
/* Wait count - 1 [Tpix] */
#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \
/* [1..256 Tpix] */ \
(((Tpix) - 1) << FShft (LCCR1_BLW))
#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */
#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \
(((Line) - 1) << FShft (LCCR2_LPP))
#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */
/* Width - 1 [Tln] (L_FCLK) */
#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \
/* Width [1..64 Tln] */ \
(((Tln) - 1) << FShft (LCCR2_VSW))
#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */
/* count [Tln] */
#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \
/* [0..255 Tln] */ \
((Tln) << FShft (LCCR2_EFW))
#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */
/* Wait count [Tln] */
#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \
/* [0..255 Tln] */ \
((Tln) << FShft (LCCR2_BFW))
#define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */
#define LCCR3_API_S 16
#define LCCR3_VSP (1 << 20) /* vertical sync polarity */
#define LCCR3_HSP (1 << 21) /* horizontal sync polarity */
#define LCCR3_PCP (1 << 22) /* pixel clock polarity */
#define LCCR3_OEP (1 << 23) /* output enable polarity */
#define LCCR3_DPC (1 << 27) /* double pixel clock mode */
#define LCCR3_PDFOR_0 (0 << 30)
#define LCCR3_PDFOR_1 (1 << 30)
#define LCCR3_PDFOR_2 (2 << 30)
#define LCCR3_PDFOR_3 (3 << 30)
#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */
#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor */ \
(((Div) << FShft (LCCR3_PCD)))
#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */
#define LCCR3_Bpp(Bpp) /* Bit Per Pixel */ \
((((Bpp&0x7) << FShft (LCCR3_BPP)))|(((Bpp&0x8)<<26)))
#define LCCR3_ACB Fld (8, 8) /* AC Bias */
#define LCCR3_Acb(Acb) /* BAC Bias */ \
(((Acb) << FShft (LCCR3_ACB)))
#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */
/* pulse active High */
#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */
#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */
/* active High */
#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */
/* active Low */
#define LCSR0_LDD (1 << 0) /* LCD Disable Done */
#define LCSR0_SOF (1 << 1) /* Start of frame */
#define LCSR0_BER (1 << 2) /* Bus error */
#define LCSR0_ABC (1 << 3) /* AC Bias count */
#define LCSR0_IUL (1 << 4) /* input FIFO underrun Lower panel */
#define LCSR0_IUU (1 << 5) /* input FIFO underrun Upper panel */
#define LCSR0_OU (1 << 6) /* output FIFO underrun */
#define LCSR0_QD (1 << 7) /* quick disable */
#define LCSR0_EOF0 (1 << 8) /* end of frame */
#define LCSR0_BS (1 << 9) /* branch status */
#define LCSR0_SINT (1 << 10) /* subsequent interrupt */
#define LCSR1_SOF1 (1 << 0)
#define LCSR1_SOF2 (1 << 1)
#define LCSR1_SOF3 (1 << 2)
#define LCSR1_SOF4 (1 << 3)
#define LCSR1_SOF5 (1 << 4)
#define LCSR1_SOF6 (1 << 5)
#define LCSR1_EOF1 (1 << 8)
#define LCSR1_EOF2 (1 << 9)
#define LCSR1_EOF3 (1 << 10)
#define LCSR1_EOF4 (1 << 11)
#define LCSR1_EOF5 (1 << 12)
#define LCSR1_EOF6 (1 << 13)
#define LCSR1_BS1 (1 << 16)
#define LCSR1_BS2 (1 << 17)
#define LCSR1_BS3 (1 << 18)
#define LCSR1_BS4 (1 << 19)
#define LCSR1_BS5 (1 << 20)
#define LCSR1_BS6 (1 << 21)
#define LCSR1_IU2 (1 << 25)
#define LCSR1_IU3 (1 << 26)
#define LCSR1_IU4 (1 << 27)
#define LCSR1_IU5 (1 << 28)
#define LCSR1_IU6 (1 << 29)
#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */
#if defined(CONFIG_PXA27X)
#define LDCMD_SOFINT (1 << 22)
#define LDCMD_EOFINT (1 << 21)
#endif
/*
* Memory controller
*/
#ifdef CONFIG_CPU_MONAHANS
/* PXA3xx */
/* Static Memory Controller Registers */
#define MSC0 0x4A000008 /* Static Memory Control Register 0 */
#define MSC1 0x4A00000C /* Static Memory Control Register 1 */
#define MECR 0x4A000014 /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
#define SXCNFG 0x4A00001C /* Synchronous Static Memory Control Register */
#define MCMEM0 0x4A000028 /* Card interface Common Memory Space Socket 0 Timing */
#define MCATT0 0x4A000030 /* Card interface Attribute Space Socket 0 Timing Configuration */
#define MCIO0 0x4A000038 /* Card interface I/O Space Socket 0 Timing Configuration */
#define MEMCLKCFG 0x4A000068 /* SCLK speed configuration */
#define CSADRCFG0 0x4A000080 /* Address Configuration for chip select 0 */
#define CSADRCFG1 0x4A000084 /* Address Configuration for chip select 1 */
#define CSADRCFG2 0x4A000088 /* Address Configuration for chip select 2 */
#define CSADRCFG3 0x4A00008C /* Address Configuration for chip select 3 */
#define CSADRCFG_P 0x4A000090 /* Address Configuration for pcmcia card interface */
#define CSMSADRCFG 0x4A0000A0 /* Master Address Configuration Register */
#define CLK_RET_DEL 0x4A0000B0 /* Delay line and mux selects for return data latching for sync. flash */
#define ADV_RET_DEL 0x4A0000B4 /* Delay line and mux selects for return data latching for sync. flash */
/* Dynamic Memory Controller Registers */
#define MDCNFG 0x48100000 /* SDRAM Configuration Register 0 */
#define MDREFR 0x48100004 /* SDRAM Refresh Control Register */
#define FLYCNFG 0x48100020 /* Fly-by DMA DVAL[1:0] polarities */
#define MDMRS 0x48100040 /* MRS value to be written to SDRAM */
#define DDR_SCAL 0x48100050 /* Software Delay Line Calibration/Configuration for external DDR memory. */
#define DDR_HCAL 0x48100060 /* Hardware Delay Line Calibration/Configuration for external DDR memory. */
#define DDR_WCAL 0x48100068 /* DDR Write Strobe Calibration Register */
#define DMCIER 0x48100070 /* Dynamic MC Interrupt Enable Register. */
#define DMCISR 0x48100078 /* Dynamic MC Interrupt Status Register. */
#define DDR_DLS 0x48100080 /* DDR Delay Line Value Status register for external DDR memory. */
#define EMPI 0x48100090 /* EMPI Control Register */
#define RCOMP 0x48100100
#define PAD_MA 0x48100110
#define PAD_MDMSB 0x48100114
#define PAD_MDLSB 0x48100118
#define PAD_DMEM 0x4810011c
#define PAD_SDCLK 0x48100120
#define PAD_SDCS 0x48100124
#define PAD_SMEM 0x48100128
#define PAD_SCLK 0x4810012C
#define TAI 0x48100F00 /* TAI Tavor Address Isolation Register */
/* Some frequently used bits */
#define MDCNFG_DMAP 0x80000000 /* SDRAM 1GB Memory Map Enable */
#define MDCNFG_DMCEN 0x40000000 /* Enable Dynamic Memory Controller */
#define MDCNFG_HWFREQ 0x20000000 /* Hardware Frequency Change Calibration */
#define MDCNFG_DTYPE 0x400 /* SDRAM Type: 1=DDR SDRAM */
#define MDCNFG_DTC_0 0x0 /* Timing Category of SDRAM */
#define MDCNFG_DTC_1 0x100
#define MDCNFG_DTC_2 0x200
#define MDCNFG_DTC_3 0x300
#define MDCNFG_DRAC_12 0x0 /* Number of Row Access Bits */
#define MDCNFG_DRAC_13 0x20
#define MDCNFG_DRAC_14 0x40
#define MDCNFG_DCAC_9 0x0 /* Number of Column Acess Bits */
#define MDCNFG_DCAC_10 0x08
#define MDCNFG_DCAC_11 0x10
#define MDCNFG_DBW_16 0x4 /* SDRAM Data Bus width 16bit */
#define MDCNFG_DCSE1 0x2 /* SDRAM CS 1 Enable */
#define MDCNFG_DCSE0 0x1 /* SDRAM CS 0 Enable */
/* Data Flash Controller Registers */
#define NDCR 0x43100000 /* Data Flash Control register */
#define NDTR0CS0 0x43100004 /* Data Controller Timing Parameter 0 Register for ND_nCS0 */
/* #define NDTR0CS1 0x43100008 /\* Data Controller Timing Parameter 0 Register for ND_nCS1 *\/ */
#define NDTR1CS0 0x4310000C /* Data Controller Timing Parameter 1 Register for ND_nCS0 */
/* #define NDTR1CS1 0x43100010 /\* Data Controller Timing Parameter 1 Register for ND_nCS1 *\/ */
#define NDSR 0x43100014 /* Data Controller Status Register */
#define NDPCR 0x43100018 /* Data Controller Page Count Register */
#define NDBDR0 0x4310001C /* Data Controller Bad Block Register 0 */
#define NDBDR1 0x43100020 /* Data Controller Bad Block Register 1 */
#define NDDB 0x43100040 /* Data Controller Data Buffer */
#define NDCB0 0x43100048 /* Data Controller Command Buffer0 */
#define NDCB1 0x4310004C /* Data Controller Command Buffer1 */
#define NDCB2 0x43100050 /* Data Controller Command Buffer2 */
#define NDCR_SPARE_EN (0x1<<31)
#define NDCR_ECC_EN (0x1<<30)
#define NDCR_DMA_EN (0x1<<29)
#define NDCR_ND_RUN (0x1<<28)
#define NDCR_DWIDTH_C (0x1<<27)
#define NDCR_DWIDTH_M (0x1<<26)
#define NDCR_PAGE_SZ (0x3<<24)
#define NDCR_NCSX (0x1<<23)
#define NDCR_ND_STOP (0x1<<22)
/* reserved:
* #define NDCR_ND_MODE (0x3<<21)
* #define NDCR_NAND_MODE 0x0 */
#define NDCR_CLR_PG_CNT (0x1<<20)
#define NDCR_CLR_ECC (0x1<<19)
#define NDCR_RD_ID_CNT (0x7<<16)
#define NDCR_RA_START (0x1<<15)
#define NDCR_PG_PER_BLK (0x1<<14)
#define NDCR_ND_ARB_EN (0x1<<12)
#define NDCR_RDYM (0x1<<11)
#define NDCR_CS0_PAGEDM (0x1<<10)
#define NDCR_CS1_PAGEDM (0x1<<9)
#define NDCR_CS0_CMDDM (0x1<<8)
#define NDCR_CS1_CMDDM (0x1<<7)
#define NDCR_CS0_BBDM (0x1<<6)
#define NDCR_CS1_BBDM (0x1<<5)
#define NDCR_DBERRM (0x1<<4)
#define NDCR_SBERRM (0x1<<3)
#define NDCR_WRDREQM (0x1<<2)
#define NDCR_RDDREQM (0x1<<1)
#define NDCR_WRCMDREQM (0x1)
#define NDSR_RDY (0x1<<11)
#define NDSR_CS0_PAGED (0x1<<10)
#define NDSR_CS1_PAGED (0x1<<9)
#define NDSR_CS0_CMDD (0x1<<8)
#define NDSR_CS1_CMDD (0x1<<7)
#define NDSR_CS0_BBD (0x1<<6)
#define NDSR_CS1_BBD (0x1<<5)
#define NDSR_DBERR (0x1<<4)
#define NDSR_SBERR (0x1<<3)
#define NDSR_WRDREQ (0x1<<2)
#define NDSR_RDDREQ (0x1<<1)
#define NDSR_WRCMDREQ (0x1)
#define NDCB0_AUTO_RS (0x1<<25)
#define NDCB0_CSEL (0x1<<24)
#define NDCB0_CMD_TYPE (0x7<<21)
#define NDCB0_NC (0x1<<20)
#define NDCB0_DBC (0x1<<19)
#define NDCB0_ADDR_CYC (0x7<<16)
#define NDCB0_CMD2 (0xff<<8)
#define NDCB0_CMD1 (0xff)
#define MCMEM(s) MCMEM0
#define MCATT(s) MCATT0
#define MCIO(s) MCIO0
#define MECR_CIT (1 << 1)/* Card Is There: 0 -> no card, 1 -> card inserted */
/* Maximum values for NAND Interface Timing Registers in DFC clock
* periods */
#define DFC_MAX_tCH 7
#define DFC_MAX_tCS 7
#define DFC_MAX_tWH 7
#define DFC_MAX_tWP 7
#define DFC_MAX_tRH 7
#define DFC_MAX_tRP 15
#define DFC_MAX_tR 65535
#define DFC_MAX_tWHR 15
#define DFC_MAX_tAR 15
#define DFC_CLOCK 104 /* DFC Clock is 104 MHz */
#define DFC_CLK_PER_US DFC_CLOCK/1000 /* clock period in ns */
#else /* CONFIG_CPU_MONAHANS */
/* PXA2xx */
#define MEMC_BASE 0x48000000 /* Base of Memory Controller */
#define MDCNFG_OFFSET 0x0
#define MDREFR_OFFSET 0x4
#define MSC0_OFFSET 0x8
#define MSC1_OFFSET 0xC
#define MSC2_OFFSET 0x10
#define MECR_OFFSET 0x14
#define SXLCR_OFFSET 0x18
#define SXCNFG_OFFSET 0x1C
#define FLYCNFG_OFFSET 0x20
#define SXMRS_OFFSET 0x24
#define MCMEM0_OFFSET 0x28
#define MCMEM1_OFFSET 0x2C
#define MCATT0_OFFSET 0x30
#define MCATT1_OFFSET 0x34
#define MCIO0_OFFSET 0x38
#define MCIO1_OFFSET 0x3C
#define MDMRS_OFFSET 0x40
#define MDCNFG 0x48000000 /* SDRAM Configuration Register 0 */
#define MDCNFG_DE0 0x00000001
#define MDCNFG_DE1 0x00000002
#define MDCNFG_DE2 0x00010000
#define MDCNFG_DE3 0x00020000
#define MDCNFG_DWID0 0x00000004
#define MDREFR 0x48000004 /* SDRAM Refresh Control Register */
#define MSC0 0x48000008 /* Static Memory Control Register 0 */
#define MSC1 0x4800000C /* Static Memory Control Register 1 */
#define MSC2 0x48000010 /* Static Memory Control Register 2 */
#define MECR 0x48000014 /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
#define SXLCR 0x48000018 /* LCR value to be written to SDRAM-Timing Synchronous Flash */
#define SXCNFG 0x4800001C /* Synchronous Static Memory Control Register */
#define FLYCNFG 0x48000020
#define SXMRS 0x48000024 /* MRS value to be written to Synchronous Flash or SMROM */
#define MCMEM0 0x48000028 /* Card interface Common Memory Space Socket 0 Timing */
#define MCMEM1 0x4800002C /* Card interface Common Memory Space Socket 1 Timing */
#define MCATT0 0x48000030 /* Card interface Attribute Space Socket 0 Timing Configuration */
#define MCATT1 0x48000034 /* Card interface Attribute Space Socket 1 Timing Configuration */
#define MCIO0 0x48000038 /* Card interface I/O Space Socket 0 Timing Configuration */
#define MCIO1 0x4800003C /* Card interface I/O Space Socket 1 Timing Configuration */
#define MDMRS 0x48000040 /* MRS value to be written to SDRAM */
#define BOOT_DEF 0x48000044 /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
#define MDREFR_ALTREFA (1 << 31) /* Exiting Alternate Bus Master Mode Refresh Control */
#define MDREFR_ALTREFB (1 << 30) /* Entering Alternate Bus Master Mode Refresh Control */
#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */
#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */
#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */
#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */
#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */
#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */
#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */
#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */
#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */
#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */
#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */
#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */
#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */
#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */
#if defined(CONFIG_PXA27X)
#define ARB_CNTRL 0x48000048 /* Arbiter Control Register */
#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */
#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */
#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */
#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */
#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */
#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */
#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */
#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
#endif /* CONFIG_PXA27X */
/* LCD registers */
#define LCCR4 0x44000010 /* LCD Controller Control Register 4 */
#define LCCR5 0x44000014 /* LCD Controller Control Register 5 */
#define FBR0 0x44000020 /* DMA Channel 0 Frame Branch Register */
#define FBR1 0x44000024 /* DMA Channel 1 Frame Branch Register */
#define FBR2 0x44000028 /* DMA Channel 2 Frame Branch Register */
#define FBR3 0x4400002C /* DMA Channel 3 Frame Branch Register */
#define FBR4 0x44000030 /* DMA Channel 4 Frame Branch Register */
#define FDADR2 0x44000220 /* DMA Channel 2 Frame Descriptor Address Register */
#define FSADR2 0x44000224 /* DMA Channel 2 Frame Source Address Register */
#define FIDR2 0x44000228 /* DMA Channel 2 Frame ID Register */
#define LDCMD2 0x4400022C /* DMA Channel 2 Command Register */
#define FDADR3 0x44000230 /* DMA Channel 3 Frame Descriptor Address Register */
#define FSADR3 0x44000234 /* DMA Channel 3 Frame Source Address Register */
#define FIDR3 0x44000238 /* DMA Channel 3 Frame ID Register */
#define LDCMD3 0x4400023C /* DMA Channel 3 Command Register */
#define FDADR4 0x44000240 /* DMA Channel 4 Frame Descriptor Address Register */
#define FSADR4 0x44000244 /* DMA Channel 4 Frame Source Address Register */
#define FIDR4 0x44000248 /* DMA Channel 4 Frame ID Register */
#define LDCMD4 0x4400024C /* DMA Channel 4 Command Register */
#define FDADR5 0x44000250 /* DMA Channel 5 Frame Descriptor Address Register */
#define FSADR5 0x44000254 /* DMA Channel 5 Frame Source Address Register */
#define FIDR5 0x44000258 /* DMA Channel 5 Frame ID Register */
#define LDCMD5 0x4400025C /* DMA Channel 5 Command Register */
#define OVL1C1 0x44000050 /* Overlay 1 Control Register 1 */
#define OVL1C2 0x44000060 /* Overlay 1 Control Register 2 */
#define OVL2C1 0x44000070 /* Overlay 2 Control Register 1 */
#define OVL2C2 0x44000080 /* Overlay 2 Control Register 2 */
#define CCR 0x44000090 /* Cursor Control Register */
#define FBR5 0x44000110 /* DMA Channel 5 Frame Branch Register */
#define FBR6 0x44000114 /* DMA Channel 6 Frame Branch Register */
#define LCCR0_LDDALT (1<<26) /* LDD Alternate mapping bit when base pixel is RGBT16 */
#define LCCR0_OUC (1<<25) /* Overlay Underlay Control Bit */
#define LCCR5_SOFM1 (1<<0) /* Start Of Frame Mask for Overlay 1 (channel 1) */
#define LCCR5_SOFM2 (1<<1) /* Start Of Frame Mask for Overlay 2 (channel 2) */
#define LCCR5_SOFM3 (1<<2) /* Start Of Frame Mask for Overlay 2 (channel 3) */
#define LCCR5_SOFM4 (1<<3) /* Start Of Frame Mask for Overlay 2 (channel 4) */
#define LCCR5_SOFM5 (1<<4) /* Start Of Frame Mask for cursor (channel 5) */
#define LCCR5_SOFM6 (1<<5) /* Start Of Frame Mask for command data (channel 6) */
#define LCCR5_EOFM1 (1<<8) /* End Of Frame Mask for Overlay 1 (channel 1) */
#define LCCR5_EOFM2 (1<<9) /* End Of Frame Mask for Overlay 2 (channel 2) */
#define LCCR5_EOFM3 (1<<10) /* End Of Frame Mask for Overlay 2 (channel 3) */
#define LCCR5_EOFM4 (1<<11) /* End Of Frame Mask for Overlay 2 (channel 4) */
#define LCCR5_EOFM5 (1<<12) /* End Of Frame Mask for cursor (channel 5) */
#define LCCR5_EOFM6 (1<<13) /* End Of Frame Mask for command data (channel 6) */
#define LCCR5_BSM1 (1<<16) /* Branch mask for Overlay 1 (channel 1) */
#define LCCR5_BSM2 (1<<17) /* Branch mask for Overlay 2 (channel 2) */
#define LCCR5_BSM3 (1<<18) /* Branch mask for Overlay 2 (channel 3) */
#define LCCR5_BSM4 (1<<19) /* Branch mask for Overlay 2 (channel 4) */
#define LCCR5_BSM5 (1<<20) /* Branch mask for cursor (channel 5) */
#define LCCR5_BSM6 (1<<21) /* Branch mask for data command (channel 6) */
#define LCCR5_IUM1 (1<<24) /* Input FIFO Underrun Mask for Overlay 1 */
#define LCCR5_IUM2 (1<<25) /* Input FIFO Underrun Mask for Overlay 2 */
#define LCCR5_IUM3 (1<<26) /* Input FIFO Underrun Mask for Overlay 2 */
#define LCCR5_IUM4 (1<<27) /* Input FIFO Underrun Mask for Overlay 2 */
#define LCCR5_IUM5 (1<<28) /* Input FIFO Underrun Mask for cursor */
#define LCCR5_IUM6 (1<<29) /* Input FIFO Underrun Mask for data command */
#define OVL1C1_O1EN (1<<31) /* Enable bit for Overlay 1 */
#define OVL2C1_O2EN (1<<31) /* Enable bit for Overlay 2 */
#define CCR_CEN (1<<31) /* Enable bit for Cursor */
/* Keypad controller */
#define KPC 0x41500000 /* Keypad Interface Control register */
#define KPDK 0x41500008 /* Keypad Interface Direct Key register */
#define KPREC 0x41500010 /* Keypad Intefcace Rotary Encoder register */
#define KPMK 0x41500018 /* Keypad Intefcace Matrix Key register */
#define KPAS 0x41500020 /* Keypad Interface Automatic Scan register */
#define KPASMKP0 0x41500028 /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */
#define KPASMKP1 0x41500030 /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */
#define KPASMKP2 0x41500038 /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */
#define KPASMKP3 0x41500040 /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */
#define KPKDI 0x41500048 /* Keypad Interface Key Debounce Interval register */
#define KPC_AS (0x1 << 30) /* Automatic Scan bit */
#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */
#define KPC_MI (0x1 << 22) /* Matrix interrupt bit */
#define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */
#define KPC_MS7 (0x1 << 20) /* Matrix scan line 7 */
#define KPC_MS6 (0x1 << 19) /* Matrix scan line 6 */
#define KPC_MS5 (0x1 << 18) /* Matrix scan line 5 */
#define KPC_MS4 (0x1 << 17) /* Matrix scan line 4 */
#define KPC_MS3 (0x1 << 16) /* Matrix scan line 3 */
#define KPC_MS2 (0x1 << 15) /* Matrix scan line 2 */
#define KPC_MS1 (0x1 << 14) /* Matrix scan line 1 */
#define KPC_MS0 (0x1 << 13) /* Matrix scan line 0 */
#define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */
#define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */
#define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Key Debounce select */
#define KPC_DI (0x1 << 5) /* Direct key interrupt bit */
#define KPC_DEE0 (0x1 << 2) /* Rotary Encoder 0 Enable */
#define KPC_DE (0x1 << 1) /* Direct Keypad Enable */
#define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */
#define KPDK_DKP (0x1 << 31)
#define KPDK_DK7 (0x1 << 7)
#define KPDK_DK6 (0x1 << 6)
#define KPDK_DK5 (0x1 << 5)
#define KPDK_DK4 (0x1 << 4)
#define KPDK_DK3 (0x1 << 3)
#define KPDK_DK2 (0x1 << 2)
#define KPDK_DK1 (0x1 << 1)
#define KPDK_DK0 (0x1 << 0)
#define KPREC_OF1 (0x1 << 31)
#define kPREC_UF1 (0x1 << 30)
#define KPREC_OF0 (0x1 << 15)
#define KPREC_UF0 (0x1 << 14)
#define KPMK_MKP (0x1 << 31)
#define KPAS_SO (0x1 << 31)
#define KPASMKPx_SO (0x1 << 31)
#define GPIO113_BIT (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */
#define PSLR 0x40F00034
#define PSTR 0x40F00038 /* Power Manager Standby Configuration Reg */
#define PSNR 0x40F0003C /* Power Manager Sense Configuration Reg */
#define PVCR 0x40F00040 /* Power Manager Voltage Change Control Reg */
#define PKWR 0x40F00050 /* Power Manager KB Wake-Up Enable Reg */
#define PKSR 0x40F00054 /* Power Manager KB Level-Detect Status Reg */
#define OSMR4 0x40A00080 /* */
#define OSCR4 0x40A00040 /* OS Timer Counter Register */
#define OMCR4 0x40A000C0 /* */
#endif /* CONFIG_PXA27X */
#endif /* _PXA_REGS_H_ */