mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 22:20:45 +00:00
e9cd3d7024
In case the slow clock is not properly configured, the UTMI clock cannot lock the PLL, because UPLLCOUNT will "wait X slow clock cycles". In this case U-boot will loop indefinitely. Added a timeout in this case, to start U-boot even if UTMI clock is not enabled, so the user can use different media if needed, or investigate. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
142 lines
3 KiB
C
142 lines
3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2016 Atmel Corporation
|
|
* Wenyou.Yang <wenyou.yang@atmel.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk-uclass.h>
|
|
#include <dm.h>
|
|
#include <syscon.h>
|
|
#include <linux/io.h>
|
|
#include <mach/at91_pmc.h>
|
|
#include <mach/sama5_sfr.h>
|
|
#include "pmc.h"
|
|
|
|
/*
|
|
* The purpose of this clock is to generate a 480 MHz signal. A different
|
|
* rate can't be configured.
|
|
*/
|
|
#define UTMI_RATE 480000000
|
|
|
|
static int utmi_clk_enable(struct clk *clk)
|
|
{
|
|
struct pmc_platdata *plat = dev_get_platdata(clk->dev);
|
|
struct at91_pmc *pmc = plat->reg_base;
|
|
struct clk clk_dev;
|
|
ulong clk_rate;
|
|
u32 utmi_ref_clk_freq;
|
|
u32 tmp;
|
|
int err;
|
|
int timeout = 2000000;
|
|
|
|
if (readl(&pmc->sr) & AT91_PMC_LOCKU)
|
|
return 0;
|
|
|
|
/*
|
|
* If mainck rate is different from 12 MHz, we have to configure the
|
|
* FREQ field of the SFR_UTMICKTRIM register to generate properly
|
|
* the utmi clock.
|
|
*/
|
|
err = clk_get_by_index(clk->dev, 0, &clk_dev);
|
|
if (err)
|
|
return -EINVAL;
|
|
|
|
clk_rate = clk_get_rate(&clk_dev);
|
|
switch (clk_rate) {
|
|
case 12000000:
|
|
utmi_ref_clk_freq = 0;
|
|
break;
|
|
case 16000000:
|
|
utmi_ref_clk_freq = 1;
|
|
break;
|
|
case 24000000:
|
|
utmi_ref_clk_freq = 2;
|
|
break;
|
|
/*
|
|
* Not supported on SAMA5D2 but it's not an issue since MAINCK
|
|
* maximum value is 24 MHz.
|
|
*/
|
|
case 48000000:
|
|
utmi_ref_clk_freq = 3;
|
|
break;
|
|
default:
|
|
printf("UTMICK: unsupported mainck rate\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (plat->regmap_sfr) {
|
|
err = regmap_read(plat->regmap_sfr, AT91_SFR_UTMICKTRIM, &tmp);
|
|
if (err)
|
|
return -EINVAL;
|
|
|
|
tmp &= ~AT91_UTMICKTRIM_FREQ;
|
|
tmp |= utmi_ref_clk_freq;
|
|
err = regmap_write(plat->regmap_sfr, AT91_SFR_UTMICKTRIM, tmp);
|
|
if (err)
|
|
return -EINVAL;
|
|
} else if (utmi_ref_clk_freq) {
|
|
printf("UTMICK: sfr node required\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
tmp = readl(&pmc->uckr);
|
|
tmp |= AT91_PMC_UPLLEN |
|
|
AT91_PMC_UPLLCOUNT |
|
|
AT91_PMC_BIASEN;
|
|
writel(tmp, &pmc->uckr);
|
|
|
|
while ((--timeout) && !(readl(&pmc->sr) & AT91_PMC_LOCKU))
|
|
;
|
|
if (!timeout) {
|
|
printf("UTMICK: timeout waiting for UPLL lock\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ulong utmi_clk_get_rate(struct clk *clk)
|
|
{
|
|
/* UTMI clk rate is fixed. */
|
|
return UTMI_RATE;
|
|
}
|
|
|
|
static struct clk_ops utmi_clk_ops = {
|
|
.enable = utmi_clk_enable,
|
|
.get_rate = utmi_clk_get_rate,
|
|
};
|
|
|
|
static int utmi_clk_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct pmc_platdata *plat = dev_get_platdata(dev);
|
|
struct udevice *syscon;
|
|
|
|
uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
|
|
"regmap-sfr", &syscon);
|
|
|
|
if (syscon)
|
|
plat->regmap_sfr = syscon_get_regmap(syscon);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int utmi_clk_probe(struct udevice *dev)
|
|
{
|
|
return at91_pmc_core_probe(dev);
|
|
}
|
|
|
|
static const struct udevice_id utmi_clk_match[] = {
|
|
{ .compatible = "atmel,at91sam9x5-clk-utmi" },
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(at91sam9x5_utmi_clk) = {
|
|
.name = "at91sam9x5-utmi-clk",
|
|
.id = UCLASS_CLK,
|
|
.of_match = utmi_clk_match,
|
|
.probe = utmi_clk_probe,
|
|
.ofdata_to_platdata = utmi_clk_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct pmc_platdata),
|
|
.ops = &utmi_clk_ops,
|
|
};
|