u-boot/board/xilinx/ml300/ml300.c
Grant Likely 99b0f0fd3f [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
Change the xilinx device drivers and board code to include config.h
instead of xparameters.h directly.  config.h always includes the
correct xparameters file.  This change reduces the posibility of
including the wrong file when adding a new xilinx board port

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-02-20 09:04:52 +01:00

128 lines
2.9 KiB
C

/*
* ml300.c: U-Boot platform support for Xilinx ML300 board
*
* Author: Xilinx, Inc.
*
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*
* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
* FITNESS FOR A PARTICULAR PURPOSE.
*
*
* Xilinx hardware products are not intended for use in life support
* appliances, devices, or systems. Use in such applications is
* expressly prohibited.
*
*
* (c) Copyright 2002-2004 Xilinx Inc.
* All rights reserved.
*
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <config.h>
#include <common.h>
#include <asm/processor.h>
#ifdef CFG_ENV_IS_IN_EEPROM
extern void convert_env(void);
#endif
int
board_pre_init(void)
{
return 0;
}
int
checkboard(void)
{
char tmp[64]; /* long enough for environment variables */
char *s, *e;
int i = getenv_r("L", tmp, sizeof (tmp));
if (i < 0) {
printf("### No HW ID - assuming ML300");
} else {
for (e = tmp; *e; ++e) {
if (*e == ' ')
break;
}
printf("### Board Serial# is ");
for (s = tmp; s < e; ++s) {
putc(*s);
}
}
putc('\n');
return (0);
}
long int
initdram(int board_type)
{
return 128 * 1024 * 1024;
}
int
testdram(void)
{
printf("test: xxx MB - ok\n");
return (0);
}
/* implement functions originally in cpu/ppc4xx/speed.c */
void
get_sys_info(sys_info_t * sysInfo)
{
sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
/* only correct if the PLB and OPB run at the same frequency */
sysInfo->freqPLB = XPAR_UARTNS550_0_CLOCK_FREQ_HZ;
sysInfo->freqPCI = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 3;
}
ulong
get_PCI_freq(void)
{
ulong val;
PPC405_SYS_INFO sys_info;
get_sys_info(&sys_info);
val = sys_info.freqPCI;
return val;
}
#ifdef CONFIG_MISC_INIT_R
int
misc_init_r()
{
/* convert env name and value to u-boot standard */
convert_env();
return 0;
}
#endif