u-boot/include/asm-i386/i8254.h
wdenk 2262cfeef9 * Patch by Daniel Engström, 13 Nov 2002:
Add support for i386 architecture and AMD SC520 board

* Patch by Pierre Aubert, 12 Nov 2002:
  Add support for DOS filesystem and booting from DOS floppy disk
2002-11-18 00:14:45 +00:00

56 lines
1.9 KiB
C

/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/* i8254.h Intel 8254 PIT registers */
#ifndef _ASMI386_I8254_H_
#define _ASMI386_I8954_H_ 1
#define PIT_T0 0x00 /* PIT channel 0 count/status */
#define PIT_T1 0x01 /* PIT channel 1 count/status */
#define PIT_T2 0x02 /* PIT channel 2 count/status */
#define PIT_COMMAND 0x03 /* PIT mode control, latch and read back */
/* PIT Command Register Bit Definitions */
#define PIT_CMD_CTR0 0x00 /* Select PIT counter 0 */
#define PIT_CMD_CTR1 0x40 /* Select PIT counter 1 */
#define PIT_CMD_CTR2 0x80 /* Select PIT counter 2 */
#define PIT_CMD_LATCH 0x00 /* Counter Latch Command */
#define PIT_CMD_LOW 0x10 /* Access counter bits 7-0 */
#define PIT_CMD_HIGH 0x20 /* Access counter bits 15-8 */
#define PIT_CMD_BOTH 0x30 /* Access counter bits 15-0 in two accesses */
#define PIT_CMD_MODE0 0x00 /* Select mode 0 */
#define PIT_CMD_MODE1 0x02 /* Select mode 1 */
#define PIT_CMD_MODE2 0x04 /* Select mode 2 */
#define PIT_CMD_MODE3 0x06 /* Select mode 3 */
#define PIT_CMD_MODE4 0x08 /* Select mode 4 */
#define PIT_CMD_MODE5 0x0A /* Select mode 5 */
#endif