mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 09:27:35 +00:00
50dcf89d90
The gdsys hrcon board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x GbE (optional) - Lattice ECP3 FPGA connected via eLBC and PCIe Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de>
648 lines
12 KiB
C
648 lines
12 KiB
C
/*
|
|
* (C) Copyright 2010
|
|
* Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <errno.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <asm/ppc4xx-gpio.h>
|
|
|
|
#include "405ep.h"
|
|
#include <gdsys_fpga.h>
|
|
|
|
#include "../common/osd.h"
|
|
#include "../common/mclink.h"
|
|
#include "../common/phy.h"
|
|
|
|
#include <i2c.h>
|
|
#include <pca953x.h>
|
|
#include <pca9698.h>
|
|
|
|
#include <miiphy.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
|
|
#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
|
|
#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
|
|
|
|
#define MAX_MUX_CHANNELS 2
|
|
|
|
enum {
|
|
UNITTYPE_MAIN_SERVER = 0,
|
|
UNITTYPE_MAIN_USER = 1,
|
|
UNITTYPE_VIDEO_SERVER = 2,
|
|
UNITTYPE_VIDEO_USER = 3,
|
|
};
|
|
|
|
enum {
|
|
HWVER_100 = 0,
|
|
HWVER_104 = 1,
|
|
HWVER_110 = 2,
|
|
HWVER_120 = 3,
|
|
HWVER_200 = 4,
|
|
HWVER_210 = 5,
|
|
HWVER_220 = 6,
|
|
HWVER_230 = 7,
|
|
};
|
|
|
|
enum {
|
|
FPGA_HWVER_200 = 0,
|
|
FPGA_HWVER_210 = 1,
|
|
};
|
|
|
|
enum {
|
|
COMPRESSION_NONE = 0,
|
|
COMPRESSION_TYPE1_DELTA = 1,
|
|
COMPRESSION_TYPE1_TYPE2_DELTA = 3,
|
|
};
|
|
|
|
enum {
|
|
AUDIO_NONE = 0,
|
|
AUDIO_TX = 1,
|
|
AUDIO_RX = 2,
|
|
AUDIO_RXTX = 3,
|
|
};
|
|
|
|
enum {
|
|
SYSCLK_147456 = 0,
|
|
};
|
|
|
|
enum {
|
|
RAM_DDR2_32 = 0,
|
|
RAM_DDR3_32 = 1,
|
|
};
|
|
|
|
enum {
|
|
CARRIER_SPEED_1G = 0,
|
|
CARRIER_SPEED_2_5G = 1,
|
|
};
|
|
|
|
enum {
|
|
MCFPGA_DONE = 1 << 0,
|
|
MCFPGA_INIT_N = 1 << 1,
|
|
MCFPGA_PROGRAM_N = 1 << 2,
|
|
MCFPGA_UPDATE_ENABLE_N = 1 << 3,
|
|
MCFPGA_RESET_N = 1 << 4,
|
|
};
|
|
|
|
enum {
|
|
GPIO_MDC = 1 << 14,
|
|
GPIO_MDIO = 1 << 15,
|
|
};
|
|
|
|
unsigned int mclink_fpgacount;
|
|
struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR;
|
|
|
|
int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data)
|
|
{
|
|
int res;
|
|
|
|
switch (fpga) {
|
|
case 0:
|
|
out_le16(reg, data);
|
|
break;
|
|
default:
|
|
res = mclink_send(fpga - 1, regoff, data);
|
|
if (res < 0) {
|
|
printf("mclink_send reg %02lx data %04x returned %d\n",
|
|
regoff, data, res);
|
|
return res;
|
|
}
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int fpga_get_reg(u32 fpga, u16 *reg, off_t regoff, u16 *data)
|
|
{
|
|
int res;
|
|
|
|
switch (fpga) {
|
|
case 0:
|
|
*data = in_le16(reg);
|
|
break;
|
|
default:
|
|
if (fpga > mclink_fpgacount)
|
|
return -EINVAL;
|
|
res = mclink_receive(fpga - 1, regoff, data);
|
|
if (res < 0) {
|
|
printf("mclink_receive reg %02lx returned %d\n",
|
|
regoff, res);
|
|
return res;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*/
|
|
int checkboard(void)
|
|
{
|
|
char *s = getenv("serial#");
|
|
|
|
puts("Board: ");
|
|
|
|
puts("IoCon");
|
|
|
|
if (s != NULL) {
|
|
puts(", serial# ");
|
|
puts(s);
|
|
}
|
|
|
|
puts("\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void print_fpga_info(unsigned int fpga, bool rgmii2_present)
|
|
{
|
|
u16 versions;
|
|
u16 fpga_version;
|
|
u16 fpga_features;
|
|
unsigned unit_type;
|
|
unsigned hardware_version;
|
|
unsigned feature_compression;
|
|
unsigned feature_osd;
|
|
unsigned feature_audio;
|
|
unsigned feature_sysclock;
|
|
unsigned feature_ramconfig;
|
|
unsigned feature_carrier_speed;
|
|
unsigned feature_carriers;
|
|
unsigned feature_video_channels;
|
|
|
|
int legacy = get_fpga_state(fpga) & FPGA_STATE_PLATFORM;
|
|
|
|
FPGA_GET_REG(fpga, versions, &versions);
|
|
FPGA_GET_REG(fpga, fpga_version, &fpga_version);
|
|
FPGA_GET_REG(fpga, fpga_features, &fpga_features);
|
|
|
|
unit_type = (versions & 0xf000) >> 12;
|
|
feature_compression = (fpga_features & 0xe000) >> 13;
|
|
feature_osd = fpga_features & (1<<11);
|
|
feature_audio = (fpga_features & 0x0600) >> 9;
|
|
feature_sysclock = (fpga_features & 0x0180) >> 7;
|
|
feature_ramconfig = (fpga_features & 0x0060) >> 5;
|
|
feature_carrier_speed = fpga_features & (1<<4);
|
|
feature_carriers = (fpga_features & 0x000c) >> 2;
|
|
feature_video_channels = fpga_features & 0x0003;
|
|
|
|
if (legacy)
|
|
printf("legacy ");
|
|
|
|
switch (unit_type) {
|
|
case UNITTYPE_MAIN_USER:
|
|
printf("Mainchannel");
|
|
break;
|
|
|
|
case UNITTYPE_VIDEO_USER:
|
|
printf("Videochannel");
|
|
break;
|
|
|
|
default:
|
|
printf("UnitType %d(not supported)", unit_type);
|
|
break;
|
|
}
|
|
|
|
if (unit_type == UNITTYPE_MAIN_USER) {
|
|
if (legacy)
|
|
hardware_version =
|
|
(in_le16((void *)LATCH2_BASE)>>8) & 0x0f;
|
|
else
|
|
hardware_version =
|
|
(!!pca9698_get_value(0x20, 24) << 0)
|
|
| (!!pca9698_get_value(0x20, 25) << 1)
|
|
| (!!pca9698_get_value(0x20, 26) << 2)
|
|
| (!!pca9698_get_value(0x20, 27) << 3);
|
|
switch (hardware_version) {
|
|
case HWVER_100:
|
|
printf(" HW-Ver 1.00,");
|
|
break;
|
|
|
|
case HWVER_104:
|
|
printf(" HW-Ver 1.04,");
|
|
break;
|
|
|
|
case HWVER_110:
|
|
printf(" HW-Ver 1.10,");
|
|
break;
|
|
|
|
case HWVER_120:
|
|
printf(" HW-Ver 1.20-1.21,");
|
|
break;
|
|
|
|
case HWVER_200:
|
|
printf(" HW-Ver 2.00,");
|
|
break;
|
|
|
|
case HWVER_210:
|
|
printf(" HW-Ver 2.10,");
|
|
break;
|
|
|
|
case HWVER_220:
|
|
printf(" HW-Ver 2.20,");
|
|
break;
|
|
|
|
case HWVER_230:
|
|
printf(" HW-Ver 2.30,");
|
|
break;
|
|
|
|
default:
|
|
printf(" HW-Ver %d(not supported),",
|
|
hardware_version);
|
|
break;
|
|
}
|
|
if (rgmii2_present)
|
|
printf(" RGMII2,");
|
|
}
|
|
|
|
if (unit_type == UNITTYPE_VIDEO_USER) {
|
|
hardware_version = versions & 0x000f;
|
|
switch (hardware_version) {
|
|
case FPGA_HWVER_200:
|
|
printf(" HW-Ver 2.00,");
|
|
break;
|
|
|
|
case FPGA_HWVER_210:
|
|
printf(" HW-Ver 2.10,");
|
|
break;
|
|
|
|
default:
|
|
printf(" HW-Ver %d(not supported),",
|
|
hardware_version);
|
|
break;
|
|
}
|
|
}
|
|
|
|
printf(" FPGA V %d.%02d\n features:",
|
|
fpga_version / 100, fpga_version % 100);
|
|
|
|
|
|
switch (feature_compression) {
|
|
case COMPRESSION_NONE:
|
|
printf(" no compression");
|
|
break;
|
|
|
|
case COMPRESSION_TYPE1_DELTA:
|
|
printf(" type1-deltacompression");
|
|
break;
|
|
|
|
case COMPRESSION_TYPE1_TYPE2_DELTA:
|
|
printf(" type1-deltacompression, type2-inlinecompression");
|
|
break;
|
|
|
|
default:
|
|
printf(" compression %d(not supported)", feature_compression);
|
|
break;
|
|
}
|
|
|
|
printf(", %sosd", feature_osd ? "" : "no ");
|
|
|
|
switch (feature_audio) {
|
|
case AUDIO_NONE:
|
|
printf(", no audio");
|
|
break;
|
|
|
|
case AUDIO_TX:
|
|
printf(", audio tx");
|
|
break;
|
|
|
|
case AUDIO_RX:
|
|
printf(", audio rx");
|
|
break;
|
|
|
|
case AUDIO_RXTX:
|
|
printf(", audio rx+tx");
|
|
break;
|
|
|
|
default:
|
|
printf(", audio %d(not supported)", feature_audio);
|
|
break;
|
|
}
|
|
|
|
puts(",\n ");
|
|
|
|
switch (feature_sysclock) {
|
|
case SYSCLK_147456:
|
|
printf("clock 147.456 MHz");
|
|
break;
|
|
|
|
default:
|
|
printf("clock %d(not supported)", feature_sysclock);
|
|
break;
|
|
}
|
|
|
|
switch (feature_ramconfig) {
|
|
case RAM_DDR2_32:
|
|
printf(", RAM 32 bit DDR2");
|
|
break;
|
|
|
|
case RAM_DDR3_32:
|
|
printf(", RAM 32 bit DDR3");
|
|
break;
|
|
|
|
default:
|
|
printf(", RAM %d(not supported)", feature_ramconfig);
|
|
break;
|
|
}
|
|
|
|
printf(", %d carrier(s) %s", feature_carriers,
|
|
feature_carrier_speed ? "2.5Gbit/s" : "1Gbit/s");
|
|
|
|
printf(", %d video channel(s)\n", feature_video_channels);
|
|
}
|
|
|
|
int last_stage_init(void)
|
|
{
|
|
int slaves;
|
|
unsigned int k;
|
|
unsigned int mux_ch;
|
|
unsigned char mclink_controllers[] = { 0x24, 0x25, 0x26 };
|
|
int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;
|
|
u16 fpga_features;
|
|
int feature_carrier_speed;
|
|
bool ch0_rgmii2_present = false;
|
|
|
|
FPGA_GET_REG(0, fpga_features, &fpga_features);
|
|
feature_carrier_speed = fpga_features & (1<<4);
|
|
|
|
if (!legacy) {
|
|
/* Turn on Parade DP501 */
|
|
pca9698_direction_output(0x20, 9, 1);
|
|
|
|
ch0_rgmii2_present = !pca9698_get_value(0x20, 30);
|
|
}
|
|
|
|
/* wait for FPGA done */
|
|
for (k = 0; k < ARRAY_SIZE(mclink_controllers); ++k) {
|
|
unsigned int ctr = 0;
|
|
|
|
if (i2c_probe(mclink_controllers[k]))
|
|
continue;
|
|
|
|
while (!(pca953x_get_val(mclink_controllers[k])
|
|
& MCFPGA_DONE)) {
|
|
udelay(100000);
|
|
if (ctr++ > 5) {
|
|
printf("no done for mclink_controller %d\n", k);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!legacy && (feature_carrier_speed == CARRIER_SPEED_1G)) {
|
|
miiphy_register(bb_miiphy_buses[0].name, bb_miiphy_read,
|
|
bb_miiphy_write);
|
|
for (mux_ch = 0; mux_ch < MAX_MUX_CHANNELS; ++mux_ch) {
|
|
if ((mux_ch == 1) && !ch0_rgmii2_present)
|
|
continue;
|
|
|
|
setup_88e1518(bb_miiphy_buses[0].name, mux_ch);
|
|
}
|
|
}
|
|
|
|
/* give slave-PLLs and Parade DP501 some time to be up and running */
|
|
udelay(500000);
|
|
|
|
mclink_fpgacount = CONFIG_SYS_MCLINK_MAX;
|
|
slaves = mclink_probe();
|
|
mclink_fpgacount = 0;
|
|
|
|
print_fpga_info(0, ch0_rgmii2_present);
|
|
osd_probe(0);
|
|
|
|
if (slaves <= 0)
|
|
return 0;
|
|
|
|
mclink_fpgacount = slaves;
|
|
|
|
for (k = 1; k <= slaves; ++k) {
|
|
FPGA_GET_REG(k, fpga_features, &fpga_features);
|
|
feature_carrier_speed = fpga_features & (1<<4);
|
|
|
|
print_fpga_info(k, false);
|
|
osd_probe(k);
|
|
if (feature_carrier_speed == CARRIER_SPEED_1G) {
|
|
miiphy_register(bb_miiphy_buses[k].name,
|
|
bb_miiphy_read, bb_miiphy_write);
|
|
setup_88e1518(bb_miiphy_buses[k].name, 0);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* provide access to fpga gpios (for I2C bitbang)
|
|
* (these may look all too simple but make iocon.h much more readable)
|
|
*/
|
|
void fpga_gpio_set(unsigned int bus, int pin)
|
|
{
|
|
FPGA_SET_REG(bus, gpio.set, pin);
|
|
}
|
|
|
|
void fpga_gpio_clear(unsigned int bus, int pin)
|
|
{
|
|
FPGA_SET_REG(bus, gpio.clear, pin);
|
|
}
|
|
|
|
int fpga_gpio_get(unsigned int bus, int pin)
|
|
{
|
|
u16 val;
|
|
|
|
FPGA_GET_REG(bus, gpio.read, &val);
|
|
|
|
return val & pin;
|
|
}
|
|
|
|
void gd405ep_init(void)
|
|
{
|
|
unsigned int k;
|
|
|
|
if (i2c_probe(0x20)) { /* i2c_probe returns 0 on success */
|
|
for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
|
|
gd->arch.fpga_state[k] |= FPGA_STATE_PLATFORM;
|
|
} else {
|
|
pca9698_direction_output(0x20, 4, 1);
|
|
}
|
|
}
|
|
|
|
void gd405ep_set_fpga_reset(unsigned state)
|
|
{
|
|
int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;
|
|
|
|
if (legacy) {
|
|
if (state) {
|
|
out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
|
|
out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
|
|
} else {
|
|
out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
|
|
out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
|
|
}
|
|
} else {
|
|
pca9698_set_value(0x20, 4, state ? 0 : 1);
|
|
}
|
|
}
|
|
|
|
void gd405ep_setup_hw(void)
|
|
{
|
|
/*
|
|
* set "startup-finished"-gpios
|
|
*/
|
|
gpio_write_bit(21, 0);
|
|
gpio_write_bit(22, 1);
|
|
}
|
|
|
|
int gd405ep_get_fpga_done(unsigned fpga)
|
|
{
|
|
int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;
|
|
|
|
if (legacy)
|
|
return in_le16((void *)LATCH2_BASE)
|
|
& CONFIG_SYS_FPGA_DONE(fpga);
|
|
else
|
|
return pca9698_get_value(0x20, 20);
|
|
}
|
|
|
|
/*
|
|
* FPGA MII bitbang implementation
|
|
*/
|
|
|
|
struct fpga_mii {
|
|
unsigned fpga;
|
|
int mdio;
|
|
} fpga_mii[] = {
|
|
{ 0, 1},
|
|
{ 1, 1},
|
|
{ 2, 1},
|
|
{ 3, 1},
|
|
};
|
|
|
|
static int mii_dummy_init(struct bb_miiphy_bus *bus)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int mii_mdio_active(struct bb_miiphy_bus *bus)
|
|
{
|
|
struct fpga_mii *fpga_mii = bus->priv;
|
|
|
|
if (fpga_mii->mdio)
|
|
FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO);
|
|
else
|
|
FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDIO);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mii_mdio_tristate(struct bb_miiphy_bus *bus)
|
|
{
|
|
struct fpga_mii *fpga_mii = bus->priv;
|
|
|
|
FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mii_set_mdio(struct bb_miiphy_bus *bus, int v)
|
|
{
|
|
struct fpga_mii *fpga_mii = bus->priv;
|
|
|
|
if (v)
|
|
FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO);
|
|
else
|
|
FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDIO);
|
|
|
|
fpga_mii->mdio = v;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mii_get_mdio(struct bb_miiphy_bus *bus, int *v)
|
|
{
|
|
u16 gpio;
|
|
struct fpga_mii *fpga_mii = bus->priv;
|
|
|
|
FPGA_GET_REG(fpga_mii->fpga, gpio.read, &gpio);
|
|
|
|
*v = ((gpio & GPIO_MDIO) != 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mii_set_mdc(struct bb_miiphy_bus *bus, int v)
|
|
{
|
|
struct fpga_mii *fpga_mii = bus->priv;
|
|
|
|
if (v)
|
|
FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDC);
|
|
else
|
|
FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDC);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mii_delay(struct bb_miiphy_bus *bus)
|
|
{
|
|
udelay(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct bb_miiphy_bus bb_miiphy_buses[] = {
|
|
{
|
|
.name = "board0",
|
|
.init = mii_dummy_init,
|
|
.mdio_active = mii_mdio_active,
|
|
.mdio_tristate = mii_mdio_tristate,
|
|
.set_mdio = mii_set_mdio,
|
|
.get_mdio = mii_get_mdio,
|
|
.set_mdc = mii_set_mdc,
|
|
.delay = mii_delay,
|
|
.priv = &fpga_mii[0],
|
|
},
|
|
{
|
|
.name = "board1",
|
|
.init = mii_dummy_init,
|
|
.mdio_active = mii_mdio_active,
|
|
.mdio_tristate = mii_mdio_tristate,
|
|
.set_mdio = mii_set_mdio,
|
|
.get_mdio = mii_get_mdio,
|
|
.set_mdc = mii_set_mdc,
|
|
.delay = mii_delay,
|
|
.priv = &fpga_mii[1],
|
|
},
|
|
{
|
|
.name = "board2",
|
|
.init = mii_dummy_init,
|
|
.mdio_active = mii_mdio_active,
|
|
.mdio_tristate = mii_mdio_tristate,
|
|
.set_mdio = mii_set_mdio,
|
|
.get_mdio = mii_get_mdio,
|
|
.set_mdc = mii_set_mdc,
|
|
.delay = mii_delay,
|
|
.priv = &fpga_mii[2],
|
|
},
|
|
{
|
|
.name = "board3",
|
|
.init = mii_dummy_init,
|
|
.mdio_active = mii_mdio_active,
|
|
.mdio_tristate = mii_mdio_tristate,
|
|
.set_mdio = mii_set_mdio,
|
|
.get_mdio = mii_get_mdio,
|
|
.set_mdc = mii_set_mdc,
|
|
.delay = mii_delay,
|
|
.priv = &fpga_mii[3],
|
|
},
|
|
};
|
|
|
|
int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) /
|
|
sizeof(bb_miiphy_buses[0]);
|