Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-09-22 23:52:03 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/clk/rockchip/clk_rk3308.c
Sean Anderson 6e33eba59f clk: Allow force setting clock defaults before relocation 
Since 291da96b8e ("clk: Allow clock defaults to be set during re-reloc
state for SPL only") it has been impossible to set clock defaults before
relocation. This is annoying on boards without SPL, since there is no way
to set clock defaults before U-Boot proper. In particular, the aisram rate
must be changed before relocation on the K210, since U-Boot will hang if we
try and change the rate while we are using aisram.

To get around this, extend the stage parameter to allow force setting
defaults, even if they would be otherwise postponed for later. A device
tree property was decided against because of the concerns in the original
commit thread about the overhead of repeatedly parsing the device tree.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-06-17 09:40:57 +08:00

1077 lines
27 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* (C) Copyright 2017-2019 Rockchip Electronics Co., Ltd
*/
#include <common.h>
#include <bitfield.h>
#include <clk-uclass.h>
#include <dm.h>
#include <div64.h>
#include <errno.h>
#include <log.h>
#include <malloc.h>
#include <syscon.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/arch/cru_rk3308.h>
#include <asm/arch-rockchip/clock.h>
#include <asm/arch-rockchip/hardware.h>
#include <dm/device-internal.h>
#include <dm/lists.h>
#include <dt-bindings/clock/rk3308-cru.h>
#include <linux/bitops.h>
DECLARE_GLOBAL_DATA_PTR;
enum {
VCO_MAX_HZ = 3200U * 1000000,
VCO_MIN_HZ = 800 * 1000000,
OUTPUT_MAX_HZ = 3200U * 1000000,
OUTPUT_MIN_HZ = 24 * 1000000,
};
#define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1))
#define RK3308_CPUCLK_RATE(_rate, _aclk_div, _pclk_div) \
{ \
.rate = _rate##U, \
.aclk_div = _aclk_div, \
.pclk_div = _pclk_div, \
}
static struct rockchip_pll_rate_table rk3308_pll_rates[] = {
/* _mhz, _refdiv, _fbdiv, _postdiv1, _postdiv2, _dsmpd, _frac */
RK3036_PLL_RATE(1300000000, 6, 325, 1, 1, 1, 0),
RK3036_PLL_RATE(1200000000, 1, 50, 1, 1, 1, 0),
RK3036_PLL_RATE(816000000, 1, 68, 2, 1, 1, 0),
RK3036_PLL_RATE(748000000, 2, 187, 3, 1, 1, 0),
};
static struct rockchip_cpu_rate_table rk3308_cpu_rates[] = {
RK3308_CPUCLK_RATE(1200000000, 1, 5),
RK3308_CPUCLK_RATE(1008000000, 1, 5),
RK3308_CPUCLK_RATE(816000000, 1, 3),
RK3308_CPUCLK_RATE(600000000, 1, 3),
RK3308_CPUCLK_RATE(408000000, 1, 1),
};
static struct rockchip_pll_clock rk3308_pll_clks[] = {
[APLL] = PLL(pll_rk3328, PLL_APLL, RK3308_PLL_CON(0),
RK3308_MODE_CON, 0, 10, 0, rk3308_pll_rates),
[DPLL] = PLL(pll_rk3328, PLL_DPLL, RK3308_PLL_CON(8),
RK3308_MODE_CON, 2, 10, 0, NULL),
[VPLL0] = PLL(pll_rk3328, PLL_VPLL0, RK3308_PLL_CON(16),
RK3308_MODE_CON, 4, 10, 0, NULL),
[VPLL1] = PLL(pll_rk3328, PLL_VPLL1, RK3308_PLL_CON(24),
RK3308_MODE_CON, 6, 10, 0, NULL),
};
static ulong rk3308_armclk_set_clk(struct rk3308_clk_priv *priv, ulong hz)
{
struct rk3308_cru *cru = priv->cru;
const struct rockchip_cpu_rate_table *rate;
ulong old_rate;
rate = rockchip_get_cpu_settings(rk3308_cpu_rates, hz);
if (!rate) {
printf("%s unsupport rate\n", __func__);
return -EINVAL;
}
/*
* select apll as cpu/core clock pll source and
* set up dependent divisors for PERI and ACLK clocks.
* core hz : apll = 1:1
*/
old_rate = rockchip_pll_get_rate(&rk3308_pll_clks[APLL],
priv->cru, APLL);
if (old_rate > hz) {
if (rockchip_pll_set_rate(&rk3308_pll_clks[APLL],
priv->cru, APLL, hz))
return -EINVAL;
rk_clrsetreg(&cru->clksel_con[0],
CORE_CLK_PLL_SEL_MASK | CORE_DIV_CON_MASK |
CORE_ACLK_DIV_MASK | CORE_DBG_DIV_MASK,
rate->aclk_div << CORE_ACLK_DIV_SHIFT |
rate->pclk_div << CORE_DBG_DIV_SHIFT |
CORE_CLK_PLL_SEL_APLL << CORE_CLK_PLL_SEL_SHIFT |
0 << CORE_DIV_CON_SHIFT);
} else if (old_rate < hz) {
rk_clrsetreg(&cru->clksel_con[0],
CORE_CLK_PLL_SEL_MASK | CORE_DIV_CON_MASK |
CORE_ACLK_DIV_MASK | CORE_DBG_DIV_MASK,
rate->aclk_div << CORE_ACLK_DIV_SHIFT |
rate->pclk_div << CORE_DBG_DIV_SHIFT |
CORE_CLK_PLL_SEL_APLL << CORE_CLK_PLL_SEL_SHIFT |
0 << CORE_DIV_CON_SHIFT);
if (rockchip_pll_set_rate(&rk3308_pll_clks[APLL],
priv->cru, APLL, hz))
return -EINVAL;
}
return rockchip_pll_get_rate(&rk3308_pll_clks[APLL], priv->cru, APLL);
}
static void rk3308_clk_get_pll_rate(struct rk3308_clk_priv *priv)
{
if (!priv->dpll_hz)
priv->dpll_hz = rockchip_pll_get_rate(&rk3308_pll_clks[DPLL],
priv->cru, DPLL);
if (!priv->vpll0_hz)
priv->vpll0_hz = rockchip_pll_get_rate(&rk3308_pll_clks[VPLL0],
priv->cru, VPLL0);
if (!priv->vpll1_hz)
priv->vpll1_hz = rockchip_pll_get_rate(&rk3308_pll_clks[VPLL1],
priv->cru, VPLL1);
}
static ulong rk3308_i2c_get_clk(struct clk *clk)
{
struct rk3308_clk_priv *priv = dev_get_priv(clk->dev);
struct rk3308_cru *cru = priv->cru;
u32 div, con, con_id;
switch (clk->id) {
case SCLK_I2C0:
con_id = 25;
break;
case SCLK_I2C1:
con_id = 26;
break;
case SCLK_I2C2:
con_id = 27;
break;
case SCLK_I2C3:
con_id = 28;
break;
default:
printf("do not support this i2c bus\n");
return -EINVAL;
}
con = readl(&cru->clksel_con[con_id]);
div = con >> CLK_I2C_DIV_CON_SHIFT & CLK_I2C_DIV_CON_MASK;
return DIV_TO_RATE(priv->dpll_hz, div);
}
static ulong rk3308_i2c_set_clk(struct clk *clk, uint hz)
{
struct rk3308_clk_priv *priv = dev_get_priv(clk->dev);
struct rk3308_cru *cru = priv->cru;
u32 src_clk_div, con_id;
src_clk_div = DIV_ROUND_UP(priv->dpll_hz, hz);
assert(src_clk_div - 1 <= 127);
switch (clk->id) {
case SCLK_I2C0:
con_id = 25;
break;
case SCLK_I2C1:
con_id = 26;
break;
case SCLK_I2C2:
con_id = 27;
break;
case SCLK_I2C3:
con_id = 28;
break;
default:
printf("do not support this i2c bus\n");
return -EINVAL;
}
rk_clrsetreg(&cru->clksel_con[con_id],
CLK_I2C_PLL_SEL_MASK | CLK_I2C_DIV_CON_MASK,
CLK_I2C_PLL_SEL_DPLL << CLK_I2C_PLL_SEL_SHIFT |
(src_clk_div - 1) << CLK_I2C_DIV_CON_SHIFT);
return rk3308_i2c_get_clk(clk);
}
static ulong rk3308_mac_set_clk(struct clk *clk, uint hz)
{
struct rk3308_clk_priv *priv = dev_get_priv(clk->dev);
struct rk3308_cru *cru = priv->cru;
u32 con = readl(&cru->clksel_con[43]);
ulong pll_rate;
u8 div;
if ((con >> MAC_PLL_SHIFT) & MAC_SEL_VPLL0)
pll_rate = rockchip_pll_get_rate(&rk3308_pll_clks[VPLL0],
priv->cru, VPLL0);
else if ((con >> MAC_PLL_SHIFT) & MAC_SEL_VPLL1)
pll_rate = rockchip_pll_get_rate(&rk3308_pll_clks[VPLL1],
priv->cru, VPLL1);
else
pll_rate = rockchip_pll_get_rate(&rk3308_pll_clks[DPLL],
priv->cru, DPLL);
/*default set 50MHZ for gmac*/
if (!hz)
hz = 50000000;
div = DIV_ROUND_UP(pll_rate, hz) - 1;
assert(div < 32);
rk_clrsetreg(&cru->clksel_con[43], MAC_DIV_MASK,
div << MAC_DIV_SHIFT);
return DIV_TO_RATE(pll_rate, div);
}
static int rk3308_mac_set_speed_clk(struct clk *clk, uint hz)
{
struct rk3308_clk_priv *priv = dev_get_priv(clk->dev);
struct rk3308_cru *cru = priv->cru;
if (hz != 2500000 && hz != 25000000) {
debug("Unsupported mac speed:%d\n", hz);
return -EINVAL;
}
rk_clrsetreg(&cru->clksel_con[43], MAC_CLK_SPEED_SEL_MASK,
((hz == 2500000) ? 0 : 1) << MAC_CLK_SPEED_SEL_SHIFT);
return 0;
}
static ulong rk3308_mmc_get_clk(struct clk *clk)
{
struct rk3308_clk_priv *priv = dev_get_priv(clk->dev);
struct rk3308_cru *cru = priv->cru;
u32 div, con, con_id;
switch (clk->id) {
case HCLK_SDMMC:
case SCLK_SDMMC:
con_id = 39;
break;
case HCLK_EMMC:
case SCLK_EMMC:
case SCLK_EMMC_SAMPLE:
con_id = 41;
break;
default:
return -EINVAL;
}
con = readl(&cru->clksel_con[con_id]);
div = (con & EMMC_DIV_MASK) >> EMMC_DIV_SHIFT;
if ((con & EMMC_PLL_MASK) >> EMMC_PLL_SHIFT
== EMMC_SEL_24M)
return DIV_TO_RATE(OSC_HZ, div) / 2;
else
return DIV_TO_RATE(priv->vpll0_hz, div) / 2;
}
static ulong rk3308_mmc_set_clk(struct clk *clk, ulong set_rate)
{
struct rk3308_clk_priv *priv = dev_get_priv(clk->dev);
struct rk3308_cru *cru = priv->cru;
int src_clk_div;
u32 con_id;
switch (clk->id) {
case HCLK_SDMMC:
case SCLK_SDMMC:
con_id = 39;
break;
case HCLK_EMMC:
case SCLK_EMMC:
con_id = 41;
break;
default:
return -EINVAL;
}
/* Select clk_sdmmc/emmc source from VPLL0 by default */
/* mmc clock defaulg div 2 internal, need provide double in cru */
src_clk_div = DIV_ROUND_UP(priv->vpll0_hz / 2, set_rate);
if (src_clk_div > 127) {
/* use 24MHz source for 400KHz clock */
src_clk_div = DIV_ROUND_UP(OSC_HZ / 2, set_rate);
rk_clrsetreg(&cru->clksel_con[con_id],
EMMC_PLL_MASK | EMMC_DIV_MASK | EMMC_CLK_SEL_MASK,
EMMC_CLK_SEL_EMMC << EMMC_CLK_SEL_SHIFT |
EMMC_SEL_24M << EMMC_PLL_SHIFT |
(src_clk_div - 1) << EMMC_DIV_SHIFT);
} else {
rk_clrsetreg(&cru->clksel_con[con_id],
EMMC_PLL_MASK | EMMC_DIV_MASK | EMMC_CLK_SEL_MASK,
EMMC_CLK_SEL_EMMC << EMMC_CLK_SEL_SHIFT |
EMMC_SEL_VPLL0 << EMMC_PLL_SHIFT |
(src_clk_div - 1) << EMMC_DIV_SHIFT);
}
return rk3308_mmc_get_clk(clk);
}
static ulong rk3308_saradc_get_clk(struct clk *clk)
{
struct rk3308_clk_priv *priv = dev_get_priv(clk->dev);
struct rk3308_cru *cru = priv->cru;
u32 div, con;
con = readl(&cru->clksel_con[34]);
div = con >> CLK_SARADC_DIV_CON_SHIFT & CLK_SARADC_DIV_CON_MASK;
return DIV_TO_RATE(OSC_HZ, div);
}
static ulong rk3308_saradc_set_clk(struct clk *clk, uint hz)
{
struct rk3308_clk_priv *priv = dev_get_priv(clk->dev);
struct rk3308_cru *cru = priv->cru;
int src_clk_div;
src_clk_div = DIV_ROUND_UP(OSC_HZ, hz);
assert(src_clk_div - 1 <= 2047);
rk_clrsetreg(&cru->clksel_con[34],
CLK_SARADC_DIV_CON_MASK,
(src_clk_div - 1) << CLK_SARADC_DIV_CON_SHIFT);
return rk3308_saradc_get_clk(clk);
}
static ulong rk3308_tsadc_get_clk(struct clk *clk)
{
struct rk3308_clk_priv *priv = dev_get_priv(clk->dev);
struct rk3308_cru *cru = priv->cru;
u32 div, con;
con = readl(&cru->clksel_con[33]);
div = con >> CLK_SARADC_DIV_CON_SHIFT & CLK_SARADC_DIV_CON_MASK;
return DIV_TO_RATE(OSC_HZ, div);
}
static ulong rk3308_tsadc_set_clk(struct clk *clk, uint hz)
{
struct rk3308_clk_priv *priv = dev_get_priv(clk->dev);
struct rk3308_cru *cru = priv->cru;
int src_clk_div;
src_clk_div = DIV_ROUND_UP(OSC_HZ, hz);
assert(src_clk_div - 1 <= 2047);
rk_clrsetreg(&cru->clksel_con[33],
CLK_SARADC_DIV_CON_MASK,
(src_clk_div - 1) << CLK_SARADC_DIV_CON_SHIFT);
return rk3308_tsadc_get_clk(clk);
}
static ulong rk3308_spi_get_clk(struct clk *clk)
{
struct rk3308_clk_priv *priv = dev_get_priv(clk->dev);
struct rk3308_cru *cru = priv->cru;
u32 div, con, con_id;
switch (clk->id) {
case SCLK_SPI0:
con_id = 30;
break;
case SCLK_SPI1:
con_id = 31;
break;
case SCLK_SPI2:
con_id = 32;
break;
default:
printf("do not support this spi bus\n");
return -EINVAL;
}
con = readl(&cru->clksel_con[con_id]);
div = con >> CLK_SPI_DIV_CON_SHIFT & CLK_SPI_DIV_CON_MASK;
return DIV_TO_RATE(priv->dpll_hz, div);
}
static ulong rk3308_spi_set_clk(struct clk *clk, uint hz)
{
struct rk3308_clk_priv *priv = dev_get_priv(clk->dev);
struct rk3308_cru *cru = priv->cru;
u32 src_clk_div, con_id;
src_clk_div = DIV_ROUND_UP(priv->dpll_hz, hz);
assert(src_clk_div - 1 <= 127);
switch (clk->id) {
case SCLK_SPI0:
con_id = 30;
break;
case SCLK_SPI1:
con_id = 31;
break;
case SCLK_SPI2:
con_id = 32;
break;
default:
printf("do not support this spi bus\n");
return -EINVAL;
}
rk_clrsetreg(&cru->clksel_con[con_id],
CLK_SPI_PLL_SEL_MASK | CLK_SPI_DIV_CON_MASK,
CLK_SPI_PLL_SEL_DPLL << CLK_SPI_PLL_SEL_SHIFT |
(src_clk_div - 1) << CLK_SPI_DIV_CON_SHIFT);
return rk3308_spi_get_clk(clk);
}
static ulong rk3308_pwm_get_clk(struct clk *clk)
{
struct rk3308_clk_priv *priv = dev_get_priv(clk->dev);
struct rk3308_cru *cru = priv->cru;
u32 div, con;
con = readl(&cru->clksel_con[29]);
div = con >> CLK_PWM_DIV_CON_SHIFT & CLK_PWM_DIV_CON_MASK;
return DIV_TO_RATE(priv->dpll_hz, div);
}
static ulong rk3308_pwm_set_clk(struct clk *clk, uint hz)
{
struct rk3308_clk_priv *priv = dev_get_priv(clk->dev);
struct rk3308_cru *cru = priv->cru;
int src_clk_div;
src_clk_div = DIV_ROUND_UP(priv->dpll_hz, hz);
assert(src_clk_div - 1 <= 127);
rk_clrsetreg(&cru->clksel_con[29],
CLK_PWM_PLL_SEL_MASK | CLK_PWM_DIV_CON_MASK,
CLK_PWM_PLL_SEL_DPLL << CLK_PWM_PLL_SEL_SHIFT |
(src_clk_div - 1) << CLK_PWM_DIV_CON_SHIFT);
return rk3308_pwm_get_clk(clk);
}
static ulong rk3308_vop_get_clk(struct clk *clk)
{
struct rk3308_clk_priv *priv = dev_get_priv(clk->dev);
struct rk3308_cru *cru = priv->cru;
u32 div, pll_sel, vol_sel, con, parent;
con = readl(&cru->clksel_con[8]);
vol_sel = (con & DCLK_VOP_SEL_MASK) >> DCLK_VOP_SEL_SHIFT;
pll_sel = (con & DCLK_VOP_PLL_SEL_MASK) >> DCLK_VOP_PLL_SEL_SHIFT;
div = con & DCLK_VOP_DIV_MASK;
if (vol_sel == DCLK_VOP_SEL_24M) {
parent = OSC_HZ;
} else if (vol_sel == DCLK_VOP_SEL_DIVOUT) {
switch (pll_sel) {
case DCLK_VOP_PLL_SEL_DPLL:
parent = priv->dpll_hz;
break;
case DCLK_VOP_PLL_SEL_VPLL0:
parent = priv->vpll0_hz;
break;
case DCLK_VOP_PLL_SEL_VPLL1:
parent = priv->vpll0_hz;
break;
default:
printf("do not support this vop pll sel\n");
return -EINVAL;
}
} else {
printf("do not support this vop sel\n");
return -EINVAL;
}
return DIV_TO_RATE(parent, div);
}
static ulong rk3308_vop_set_clk(struct clk *clk, ulong hz)
{
struct rk3308_clk_priv *priv = dev_get_priv(clk->dev);
struct rk3308_cru *cru = priv->cru;
ulong pll_rate, now, best_rate = 0;
u32 i, div, best_div = 0, best_sel = 0;
for (i = 0; i <= DCLK_VOP_PLL_SEL_VPLL1; i++) {
switch (i) {
case DCLK_VOP_PLL_SEL_DPLL:
pll_rate = priv->dpll_hz;
break;
case DCLK_VOP_PLL_SEL_VPLL0:
pll_rate = priv->vpll0_hz;
break;
case DCLK_VOP_PLL_SEL_VPLL1:
pll_rate = priv->vpll1_hz;
break;
default:
printf("do not support this vop pll sel\n");
return -EINVAL;
}
div = DIV_ROUND_UP(pll_rate, hz);
if (div > 255)
continue;
now = pll_rate / div;
if (abs(hz - now) < abs(hz - best_rate)) {
best_rate = now;
best_div = div;
best_sel = i;
}
debug("pll_rate=%lu, best_rate=%lu, best_div=%u, best_sel=%u\n",
pll_rate, best_rate, best_div, best_sel);
}
if (best_rate != hz && hz == OSC_HZ) {
rk_clrsetreg(&cru->clksel_con[8],
DCLK_VOP_SEL_MASK,
DCLK_VOP_SEL_24M << DCLK_VOP_SEL_SHIFT);
} else if (best_rate) {
rk_clrsetreg(&cru->clksel_con[8],
DCLK_VOP_SEL_MASK | DCLK_VOP_PLL_SEL_MASK |
DCLK_VOP_DIV_MASK,
DCLK_VOP_SEL_DIVOUT << DCLK_VOP_SEL_SHIFT |
best_sel << DCLK_VOP_PLL_SEL_SHIFT |
(best_div - 1) << DCLK_VOP_DIV_SHIFT);
} else {
printf("do not support this vop freq\n");
return -EINVAL;
}
return rk3308_vop_get_clk(clk);
}
static ulong rk3308_bus_get_clk(struct rk3308_clk_priv *priv, ulong clk_id)
{
struct rk3308_cru *cru = priv->cru;
u32 div, con, parent = priv->dpll_hz;
switch (clk_id) {
case ACLK_BUS:
con = readl(&cru->clksel_con[5]);
div = (con & BUS_ACLK_DIV_MASK) >> BUS_ACLK_DIV_SHIFT;
break;
case HCLK_BUS:
con = readl(&cru->clksel_con[6]);
div = (con & BUS_HCLK_DIV_MASK) >> BUS_HCLK_DIV_SHIFT;
break;
case PCLK_BUS:
case PCLK_WDT:
con = readl(&cru->clksel_con[6]);
div = (con & BUS_PCLK_DIV_MASK) >> BUS_PCLK_DIV_SHIFT;
break;
default:
return -ENOENT;
}
return DIV_TO_RATE(parent, div);
}
static ulong rk3308_bus_set_clk(struct rk3308_clk_priv *priv, ulong clk_id,
ulong hz)
{
struct rk3308_cru *cru = priv->cru;
int src_clk_div;
src_clk_div = DIV_ROUND_UP(priv->dpll_hz, hz);
assert(src_clk_div - 1 <= 31);
/*
* select dpll as pd_bus bus clock source and
* set up dependent divisors for PCLK/HCLK and ACLK clocks.
*/
switch (clk_id) {
case ACLK_BUS:
rk_clrsetreg(&cru->clksel_con[5],
BUS_PLL_SEL_MASK | BUS_ACLK_DIV_MASK,
BUS_PLL_SEL_DPLL << BUS_PLL_SEL_SHIFT |
(src_clk_div - 1) << BUS_ACLK_DIV_SHIFT);
break;
case HCLK_BUS:
rk_clrsetreg(&cru->clksel_con[6],
BUS_HCLK_DIV_MASK,
(src_clk_div - 1) << BUS_HCLK_DIV_SHIFT);
break;
case PCLK_BUS:
rk_clrsetreg(&cru->clksel_con[6],
BUS_PCLK_DIV_MASK,
(src_clk_div - 1) << BUS_PCLK_DIV_SHIFT);
break;
default:
printf("do not support this bus freq\n");
return -EINVAL;
}
return rk3308_bus_get_clk(priv, clk_id);
}
static ulong rk3308_peri_get_clk(struct rk3308_clk_priv *priv, ulong clk_id)
{
struct rk3308_cru *cru = priv->cru;
u32 div, con, parent = priv->dpll_hz;
switch (clk_id) {
case ACLK_PERI:
con = readl(&cru->clksel_con[36]);
div = (con & PERI_ACLK_DIV_MASK) >> PERI_ACLK_DIV_SHIFT;
break;
case HCLK_PERI:
con = readl(&cru->clksel_con[37]);
div = (con & PERI_HCLK_DIV_MASK) >> PERI_HCLK_DIV_SHIFT;
break;
case PCLK_PERI:
con = readl(&cru->clksel_con[37]);
div = (con & PERI_PCLK_DIV_MASK) >> PERI_PCLK_DIV_SHIFT;
break;
default:
return -ENOENT;
}
return DIV_TO_RATE(parent, div);
}
static ulong rk3308_peri_set_clk(struct rk3308_clk_priv *priv, ulong clk_id,
ulong hz)
{
struct rk3308_cru *cru = priv->cru;
int src_clk_div;
src_clk_div = DIV_ROUND_UP(priv->dpll_hz, hz);
assert(src_clk_div - 1 <= 31);
/*
* select dpll as pd_peri bus clock source and
* set up dependent divisors for PCLK/HCLK and ACLK clocks.
*/
switch (clk_id) {
case ACLK_PERI:
rk_clrsetreg(&cru->clksel_con[36],
PERI_PLL_SEL_MASK | PERI_ACLK_DIV_MASK,
PERI_PLL_DPLL << PERI_PLL_SEL_SHIFT |
(src_clk_div - 1) << PERI_ACLK_DIV_SHIFT);
break;
case HCLK_PERI:
rk_clrsetreg(&cru->clksel_con[37],
PERI_HCLK_DIV_MASK,
(src_clk_div - 1) << PERI_HCLK_DIV_SHIFT);
break;
case PCLK_PERI:
rk_clrsetreg(&cru->clksel_con[37],
PERI_PCLK_DIV_MASK,
(src_clk_div - 1) << PERI_PCLK_DIV_SHIFT);
break;
default:
printf("do not support this peri freq\n");
return -EINVAL;
}
return rk3308_peri_get_clk(priv, clk_id);
}
static ulong rk3308_audio_get_clk(struct rk3308_clk_priv *priv, ulong clk_id)
{
struct rk3308_cru *cru = priv->cru;
u32 div, con, parent = priv->vpll0_hz;
switch (clk_id) {
case HCLK_AUDIO:
con = readl(&cru->clksel_con[45]);
div = (con & AUDIO_HCLK_DIV_MASK) >> AUDIO_HCLK_DIV_SHIFT;
break;
case PCLK_AUDIO:
con = readl(&cru->clksel_con[45]);
div = (con & AUDIO_PCLK_DIV_MASK) >> AUDIO_PCLK_DIV_SHIFT;
break;
default:
return -ENOENT;
}
return DIV_TO_RATE(parent, div);
}
static ulong rk3308_audio_set_clk(struct rk3308_clk_priv *priv, ulong clk_id,
ulong hz)
{
struct rk3308_cru *cru = priv->cru;
int src_clk_div;
src_clk_div = DIV_ROUND_UP(priv->vpll0_hz, hz);
assert(src_clk_div - 1 <= 31);
/*
* select vpll0 as audio bus clock source and
* set up dependent divisors for HCLK and PCLK clocks.
*/
switch (clk_id) {
case HCLK_AUDIO:
rk_clrsetreg(&cru->clksel_con[45],
AUDIO_PLL_SEL_MASK | AUDIO_HCLK_DIV_MASK,
AUDIO_PLL_VPLL0 << AUDIO_PLL_SEL_SHIFT |
(src_clk_div - 1) << AUDIO_HCLK_DIV_SHIFT);
break;
case PCLK_AUDIO:
rk_clrsetreg(&cru->clksel_con[45],
AUDIO_PLL_SEL_MASK | AUDIO_PCLK_DIV_MASK,
AUDIO_PLL_VPLL0 << AUDIO_PLL_SEL_SHIFT |
(src_clk_div - 1) << AUDIO_PCLK_DIV_SHIFT);
break;
default:
printf("do not support this audio freq\n");
return -EINVAL;
}
return rk3308_peri_get_clk(priv, clk_id);
}
static ulong rk3308_crypto_get_clk(struct rk3308_clk_priv *priv, ulong clk_id)
{
struct rk3308_cru *cru = priv->cru;
u32 div, con, parent;
switch (clk_id) {
case SCLK_CRYPTO:
con = readl(&cru->clksel_con[7]);
div = (con & CRYPTO_DIV_MASK) >> CRYPTO_DIV_SHIFT;
parent = priv->vpll0_hz;
break;
case SCLK_CRYPTO_APK:
con = readl(&cru->clksel_con[7]);
div = (con & CRYPTO_APK_DIV_MASK) >> CRYPTO_APK_DIV_SHIFT;
parent = priv->vpll0_hz;
break;
default:
return -ENOENT;
}
return DIV_TO_RATE(parent, div);
}
static ulong rk3308_crypto_set_clk(struct rk3308_clk_priv *priv, ulong clk_id,
ulong hz)
{
struct rk3308_cru *cru = priv->cru;
int src_clk_div;
src_clk_div = DIV_ROUND_UP(priv->vpll0_hz, hz);
assert(src_clk_div - 1 <= 31);
/*
* select gpll as crypto clock source and
* set up dependent divisors for crypto clocks.
*/
switch (clk_id) {
case SCLK_CRYPTO:
rk_clrsetreg(&cru->clksel_con[7],
CRYPTO_PLL_SEL_MASK | CRYPTO_DIV_MASK,
CRYPTO_PLL_SEL_VPLL0 << CRYPTO_PLL_SEL_SHIFT |
(src_clk_div - 1) << CRYPTO_DIV_SHIFT);
break;
case SCLK_CRYPTO_APK:
rk_clrsetreg(&cru->clksel_con[7],
CRYPTO_APK_PLL_SEL_MASK | CRYPTO_APK_DIV_MASK,
CRYPTO_PLL_SEL_VPLL0 << CRYPTO_APK_SEL_SHIFT |
(src_clk_div - 1) << CRYPTO_APK_DIV_SHIFT);
break;
default:
printf("do not support this peri freq\n");
return -EINVAL;
}
return rk3308_crypto_get_clk(priv, clk_id);
}
static ulong rk3308_clk_get_rate(struct clk *clk)
{
struct rk3308_clk_priv *priv = dev_get_priv(clk->dev);
ulong rate = 0;
debug("%s id:%ld\n", __func__, clk->id);
switch (clk->id) {
case PLL_APLL:
case ARMCLK:
rate = rockchip_pll_get_rate(&rk3308_pll_clks[APLL],
priv->cru, APLL);
break;
case PLL_DPLL:
rate = rockchip_pll_get_rate(&rk3308_pll_clks[DPLL],
priv->cru, DPLL);
break;
case PLL_VPLL0:
rate = rockchip_pll_get_rate(&rk3308_pll_clks[VPLL0],
priv->cru, VPLL0);
break;
case PLL_VPLL1:
rate = rockchip_pll_get_rate(&rk3308_pll_clks[VPLL1],
priv->cru, VPLL1);
break;
case HCLK_SDMMC:
case HCLK_EMMC:
case SCLK_SDMMC:
case SCLK_EMMC:
case SCLK_EMMC_SAMPLE:
rate = rk3308_mmc_get_clk(clk);
break;
case SCLK_I2C0:
case SCLK_I2C1:
case SCLK_I2C2:
case SCLK_I2C3:
rate = rk3308_i2c_get_clk(clk);
break;
case SCLK_SARADC:
rate = rk3308_saradc_get_clk(clk);
break;
case SCLK_TSADC:
rate = rk3308_tsadc_get_clk(clk);
break;
case SCLK_SPI0:
case SCLK_SPI1:
rate = rk3308_spi_get_clk(clk);
break;
case SCLK_PWM0:
rate = rk3308_pwm_get_clk(clk);
break;
case DCLK_VOP:
rate = rk3308_vop_get_clk(clk);
break;
case ACLK_BUS:
case HCLK_BUS:
case PCLK_BUS:
case PCLK_WDT:
rate = rk3308_bus_get_clk(priv, clk->id);
break;
case ACLK_PERI:
case HCLK_PERI:
case PCLK_PERI:
rate = rk3308_peri_get_clk(priv, clk->id);
break;
case HCLK_AUDIO:
case PCLK_AUDIO:
rate = rk3308_audio_get_clk(priv, clk->id);
break;
case SCLK_CRYPTO:
case SCLK_CRYPTO_APK:
rate = rk3308_crypto_get_clk(priv, clk->id);
break;
default:
return -ENOENT;
}
return rate;
}
static ulong rk3308_clk_set_rate(struct clk *clk, ulong rate)
{
struct rk3308_clk_priv *priv = dev_get_priv(clk->dev);
ulong ret = 0;
debug("%s %ld %ld\n", __func__, clk->id, rate);
switch (clk->id) {
case PLL_DPLL:
ret = rockchip_pll_set_rate(&rk3308_pll_clks[DPLL], priv->cru,
DPLL, rate);
priv->dpll_hz = rockchip_pll_get_rate(&rk3308_pll_clks[DPLL],
priv->cru, DPLL);
break;
case ARMCLK:
if (priv->armclk_hz)
rk3308_armclk_set_clk(priv, rate);
priv->armclk_hz = rate;
break;
case HCLK_SDMMC:
case HCLK_EMMC:
case SCLK_SDMMC:
case SCLK_EMMC:
ret = rk3308_mmc_set_clk(clk, rate);
break;
case SCLK_I2C0:
case SCLK_I2C1:
case SCLK_I2C2:
case SCLK_I2C3:
ret = rk3308_i2c_set_clk(clk, rate);
break;
case SCLK_MAC:
ret = rk3308_mac_set_clk(clk, rate);
break;
case SCLK_MAC_RMII:
ret = rk3308_mac_set_speed_clk(clk, rate);
break;
case SCLK_SARADC:
ret = rk3308_saradc_set_clk(clk, rate);
break;
case SCLK_TSADC:
ret = rk3308_tsadc_set_clk(clk, rate);
break;
case SCLK_SPI0:
case SCLK_SPI1:
ret = rk3308_spi_set_clk(clk, rate);
break;
case SCLK_PWM0:
ret = rk3308_pwm_set_clk(clk, rate);
break;
case DCLK_VOP:
ret = rk3308_vop_set_clk(clk, rate);
break;
case ACLK_BUS:
case HCLK_BUS:
case PCLK_BUS:
rate = rk3308_bus_set_clk(priv, clk->id, rate);
break;
case ACLK_PERI:
case HCLK_PERI:
case PCLK_PERI:
rate = rk3308_peri_set_clk(priv, clk->id, rate);
break;
case HCLK_AUDIO:
case PCLK_AUDIO:
rate = rk3308_audio_set_clk(priv, clk->id, rate);
break;
case SCLK_CRYPTO:
case SCLK_CRYPTO_APK:
ret = rk3308_crypto_set_clk(priv, clk->id, rate);
break;
default:
return -ENOENT;
}
return ret;
}
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
static int __maybe_unused rk3308_mac_set_parent(struct clk *clk, struct clk *parent)
{
struct rk3308_clk_priv *priv = dev_get_priv(clk->dev);
/*
* If the requested parent is in the same clock-controller and
* the id is SCLK_MAC_SRC, switch to the internal clock.
*/
if (parent->id == SCLK_MAC_SRC) {
debug("%s: switching RMII to SCLK_MAC\n", __func__);
rk_clrreg(&priv->cru->clksel_con[43], BIT(14));
} else {
debug("%s: switching RMII to CLKIN\n", __func__);
rk_setreg(&priv->cru->clksel_con[43], BIT(14));
}
return 0;
}
static int __maybe_unused rk3308_clk_set_parent(struct clk *clk, struct clk *parent)
{
switch (clk->id) {
case SCLK_MAC:
return rk3308_mac_set_parent(clk, parent);
default:
break;
}
debug("%s: unsupported clk %ld\n", __func__, clk->id);
return -ENOENT;
}
#endif
static struct clk_ops rk3308_clk_ops = {
.get_rate = rk3308_clk_get_rate,
.set_rate = rk3308_clk_set_rate,
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
.set_parent = rk3308_clk_set_parent,
#endif
};
static void rk3308_clk_init(struct udevice *dev)
{
struct rk3308_clk_priv *priv = dev_get_priv(dev);
int ret;
if (rockchip_pll_get_rate(&rk3308_pll_clks[APLL],
priv->cru, APLL) != APLL_HZ) {
ret = rk3308_armclk_set_clk(priv, APLL_HZ);
if (ret < 0)
printf("%s failed to set armclk rate\n", __func__);
}
rk3308_clk_get_pll_rate(priv);
rk3308_bus_set_clk(priv, ACLK_BUS, BUS_ACLK_HZ);
rk3308_bus_set_clk(priv, HCLK_BUS, BUS_HCLK_HZ);
rk3308_bus_set_clk(priv, PCLK_BUS, BUS_PCLK_HZ);
rk3308_peri_set_clk(priv, ACLK_PERI, PERI_ACLK_HZ);
rk3308_peri_set_clk(priv, HCLK_PERI, PERI_HCLK_HZ);
rk3308_peri_set_clk(priv, PCLK_PERI, PERI_PCLK_HZ);
rk3308_audio_set_clk(priv, HCLK_AUDIO, AUDIO_HCLK_HZ);
rk3308_audio_set_clk(priv, PCLK_AUDIO, AUDIO_PCLK_HZ);
}
static int rk3308_clk_probe(struct udevice *dev)
{
int ret;
rk3308_clk_init(dev);
/* Process 'assigned-{clocks/clock-parents/clock-rates}' properties */
ret = clk_set_defaults(dev, CLK_DEFAULTS_POST);
if (ret)
debug("%s clk_set_defaults failed %d\n", __func__, ret);
return ret;
}
static int rk3308_clk_of_to_plat(struct udevice *dev)
{
struct rk3308_clk_priv *priv = dev_get_priv(dev);
priv->cru = dev_read_addr_ptr(dev);
return 0;
}
static int rk3308_clk_bind(struct udevice *dev)
{
int ret;
struct udevice *sys_child;
struct sysreset_reg *priv;
/* The reset driver does not have a device node, so bind it here */
ret = device_bind_driver(dev, "rockchip_sysreset", "sysreset",
&sys_child);
if (ret) {
debug("Warning: No sysreset driver: ret=%d\n", ret);
} else {
priv = malloc(sizeof(struct sysreset_reg));
priv->glb_srst_fst_value = offsetof(struct rk3308_cru,
glb_srst_fst);
priv->glb_srst_snd_value = offsetof(struct rk3308_cru,
glb_srst_snd);
dev_set_priv(sys_child, priv);
}
#if CONFIG_IS_ENABLED(RESET_ROCKCHIP)
ret = offsetof(struct rk3308_cru, softrst_con[0]);
ret = rockchip_reset_bind(dev, ret, 12);
if (ret)
debug("Warning: software reset driver bind faile\n");
#endif
return 0;
}
static const struct udevice_id rk3308_clk_ids[] = {
{ .compatible = "rockchip,rk3308-cru" },
{ }
};
U_BOOT_DRIVER(rockchip_rk3308_cru) = {
.name = "rockchip_rk3308_cru",
.id = UCLASS_CLK,
.of_match = rk3308_clk_ids,
.priv_auto = sizeof(struct rk3308_clk_priv),
.of_to_plat = rk3308_clk_of_to_plat,
.ops = &rk3308_clk_ops,
.bind = rk3308_clk_bind,
.probe = rk3308_clk_probe,
};
Reference in a new issue View git blame Copy permalink