u-boot

mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-21 02:33:07 +00:00

History

Simon Glass 401d1c4f5d common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>		2021-02-02 15:33:42 -05:00
..
Kconfig	imx: Extend PCL063 support for phyCORE-i.MX6ULL SOM	2019-06-11 10:42:48 +02:00
MAINTAINERS	imx: sync with kernel device tree for Phycore SoM	2020-01-07 10:26:56 +01:00
Makefile	imx: Add PHYTEC phyBOARD-i.MX6UL-Segin	2019-01-28 12:47:27 +01:00
pcl063.c	common: Drop asm/global_data.h from common header	2021-02-02 15:33:42 -05:00
README	imx: Add PHYTEC phyBOARD-i.MX6UL-Segin	2019-01-28 12:47:27 +01:00
spl.c	treewide: convert bd_t to struct bd_info by coccinelle	2020-07-17 09:30:13 -04:00

README

How to use U-Boot on PHYTEC phyBOARD-i.MX6UL-Segin
--------------------------------------------------

- Configure and build U-Boot for phyCORE-i.MX6UL:

    $ make mrproper
    $ make phycore_pcl063_defconfig
    $ make

  This will generate SPL and u-boot-dtb.img images.

- The SPL and u-boot-dtb.img images need to be flashed into the micro SD card:

    $ sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
    $ sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Jumper settings:

  JP1:   Open: Boot from NAND
       Closed: Boot from SD/MMC1

- Connect the Serial cable to UART0 and the PC for the console.

- Insert the micro SD card in the board and power it up.

- U-Boot messages should come up.