u-boot/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c
Poonam Aggrwal bc6bbd6be8 fsl_ifc: Add the workaround for erratum IFC A-003399(enabled on P1010)
Issue: Address masking doesn't work properly.
When sum of the base address, defined by BA, and memory bank size,
defined by AM, exceeds 4GB (0xffff_ffff) then AMASKn[AM] doesn't mask
CSPRn[BA] bits.

Impact:
This will impact booting when we are reprogramming CSPR0(BA) and
AMASK0(AMASK) while executing from NOR Flash.

Workaround:
Re-programming of CSPR(BA) and AMASK is done while not executing from NOR
Flash. The code which programs the BA and AMASK is executed from L2-SRAM.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-09-29 19:01:04 -05:00

68 lines
2 KiB
C

/*
* Copyright 2009 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/fsl_ifc.h>
#include <asm/io.h>
void cpu_init_f(void)
{
#ifdef CONFIG_FSL_LBC
fsl_lbc_t *lbc = LBC_BASE_ADDR;
/*
* LCRR - Clock Ratio Register - set up local bus timing
* when needed
*/
out_be32(&lbc->lcrr, LCRR_DBYP | LCRR_CLKDIV_8);
#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM)
set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM);
set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM);
#else
#error CONFIG_SYS_NAND_BR_PRELIM, CONFIG_SYS_NAND_OR_PRELIM must be defined
#endif
#endif
#ifdef CONFIG_FSL_IFC
#ifndef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
#if defined(CONFIG_SYS_CSPR0) && defined(CONFIG_SYS_CSOR0)
set_ifc_cspr(IFC_CS0, CONFIG_SYS_CSPR0);
set_ifc_amask(IFC_CS0, CONFIG_SYS_AMASK0);
set_ifc_csor(IFC_CS0, CONFIG_SYS_CSOR0);
#endif
#endif
#endif
#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
out_be32(&l2cache->l2srbar0, CONFIG_SYS_INIT_L2_ADDR);
/* set MBECCDIS=1, SBECCDIS=1 */
out_be32(&l2cache->l2errdis,
(MPC85xx_L2ERRDIS_MBECC | MPC85xx_L2ERRDIS_SBECC));
/* set L2E=1 & L2SRAM=001 */
out_be32(&l2cache->l2ctl,
(MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2SRAM_ENTIRE));
#endif
}