u-boot/arch/arm/include/asm/arch-omap5
Andrii Tseglytskyi 4d0df9c1e9 OMAP3+: introduce generic ABB support
Adaptive Body Biasing (ABB) modulates transistor bias voltages
dynamically in order to optimize switching speed versus leakage.
Adaptive Body-Bias ldos are present for some voltage domains
starting with OMAP3630. There are three modes of operation:

* Bypass - the default, it just follows the vdd voltage
* Foward Body-Bias - applies voltage bias to increase transistor
  performance at the cost of power.  Used to operate safely at high
  OPPs.
* Reverse Body-Bias - applies voltage bias to decrease leakage and
  save power.  Used to save power at lower OPPs.

Signed-off-by: Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
2013-06-10 08:43:09 -04:00
..
clocks.h ARM: OMAP5: Fix warm reset with USB cable connected 2013-05-10 08:25:55 -04:00
cpu.h OMAP5: I2C: Add I2C4 and I2C5 bases 2013-05-10 08:25:55 -04:00
gpio.h omap5: Add minimal support for omap5430. 2011-11-15 22:25:50 +01:00
i2c.h OMAP5: I2C: Set I2C_BUS_MAX to 5 to enable I2C4 and I2C5 2013-05-10 08:25:55 -04:00
mmc_host_def.h omap: consolidate common mmc definitions 2013-03-08 16:41:12 -05:00
mux_dra7xx.h arm: dra7xx: Add board files for DRA7XX socs 2013-03-11 11:39:30 -04:00
mux_omap5.h arm: dra7xx: Add board files for DRA7XX socs 2013-03-11 11:39:30 -04:00
omap.h OMAP3+: introduce generic ABB support 2013-06-10 08:43:09 -04:00
spl.h OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC 2013-04-08 11:29:34 -04:00
sys_proto.h am33xx/omap: Move save_omap_boot_params to omap-common/boot-common.c 2013-06-05 08:46:49 -04:00