mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 09:27:35 +00:00
3225f34e5c
Add sama5d3xek support with following feature - boot from NAND flash, PMECC support, 4bit ECC @ 512 bytes sector - boot from SPI flash support - boot from SD card support - LCD support - EMAC support - USB OHCI support Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
125 lines
2.9 KiB
C
125 lines
2.9 KiB
C
/*
|
|
* [origin: Linux kernel linux/arch/arm/mach-at91/clock.c]
|
|
*
|
|
* Copyright (C) 2005 David Brownell
|
|
* Copyright (C) 2005 Ivan Kokshaysky
|
|
* Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
|
* Copyright (C) 2013 Bo Shen <voice.shen@atmel.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/at91_pmc.h>
|
|
#include <asm/arch/clk.h>
|
|
|
|
#if !defined(CONFIG_AT91FAMILY)
|
|
# error You need to define CONFIG_AT91FAMILY in your board config!
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static unsigned long at91_css_to_rate(unsigned long css)
|
|
{
|
|
switch (css) {
|
|
case AT91_PMC_MCKR_CSS_SLOW:
|
|
return CONFIG_SYS_AT91_SLOW_CLOCK;
|
|
case AT91_PMC_MCKR_CSS_MAIN:
|
|
return gd->arch.main_clk_rate_hz;
|
|
case AT91_PMC_MCKR_CSS_PLLA:
|
|
return gd->arch.plla_rate_hz;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 at91_pll_rate(u32 freq, u32 reg)
|
|
{
|
|
unsigned mul, div;
|
|
|
|
div = reg & 0xff;
|
|
mul = (reg >> 18) & 0x7f;
|
|
if (div && mul) {
|
|
freq /= div;
|
|
freq *= mul + 1;
|
|
} else {
|
|
freq = 0;
|
|
}
|
|
|
|
return freq;
|
|
}
|
|
|
|
int at91_clock_init(unsigned long main_clock)
|
|
{
|
|
unsigned freq, mckr;
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
#ifndef CONFIG_SYS_AT91_MAIN_CLOCK
|
|
unsigned tmp;
|
|
/*
|
|
* When the bootloader initialized the main oscillator correctly,
|
|
* there's no problem using the cycle counter. But if it didn't,
|
|
* or when using oscillator bypass mode, we must be told the speed
|
|
* of the main clock.
|
|
*/
|
|
if (!main_clock) {
|
|
do {
|
|
tmp = readl(&pmc->mcfr);
|
|
} while (!(tmp & AT91_PMC_MCFR_MAINRDY));
|
|
tmp &= AT91_PMC_MCFR_MAINF_MASK;
|
|
main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16);
|
|
}
|
|
#endif
|
|
gd->arch.main_clk_rate_hz = main_clock;
|
|
|
|
/* report if PLLA is more than mildly overclocked */
|
|
gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
|
|
|
|
/*
|
|
* MCK and CPU derive from one of those primary clocks.
|
|
* For now, assume this parentage won't change.
|
|
*/
|
|
mckr = readl(&pmc->mckr);
|
|
|
|
/* plla divisor by 2 */
|
|
if (mckr & (1 << 12))
|
|
gd->arch.plla_rate_hz >>= 1;
|
|
|
|
gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
|
|
freq = gd->arch.mck_rate_hz;
|
|
|
|
/* prescale */
|
|
freq >>= mckr & AT91_PMC_MCKR_PRES_MASK;
|
|
|
|
switch (mckr & AT91_PMC_MCKR_MDIV_MASK) {
|
|
case AT91_PMC_MCKR_MDIV_2:
|
|
gd->arch.mck_rate_hz = freq / 2;
|
|
break;
|
|
case AT91_PMC_MCKR_MDIV_3:
|
|
gd->arch.mck_rate_hz = freq / 3;
|
|
break;
|
|
case AT91_PMC_MCKR_MDIV_4:
|
|
gd->arch.mck_rate_hz = freq / 4;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
gd->arch.cpu_clk_rate_hz = freq;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void at91_periph_clk_enable(int id)
|
|
{
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
|
|
if (id > 31)
|
|
writel(1 << (id - 32), &pmc->pcer1);
|
|
else
|
|
writel(1 << id, &pmc->pcer);
|
|
}
|