mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 03:08:31 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
80 lines
2 KiB
C
80 lines
2 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Embest/Timll DevKit3250 board support
|
|
*
|
|
* Copyright (C) 2011-2015 Vladimir Zapolskiy <vz@mleia.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/emc.h>
|
|
#include <asm/arch/wdt.h>
|
|
#include <asm/io.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static struct emc_regs *emc = (struct emc_regs *)EMC_BASE;
|
|
static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE;
|
|
static struct wdt_regs *wdt = (struct wdt_regs *)WDT_BASE;
|
|
|
|
void reset_periph(void)
|
|
{
|
|
/* This function resets peripherals by triggering RESOUT_N */
|
|
setbits_le32(&clk->timclk_ctrl, CLK_TIMCLK_WATCHDOG);
|
|
writel(WDTIM_MCTRL_RESFRC1, &wdt->mctrl);
|
|
udelay(300);
|
|
|
|
writel(0, &wdt->mctrl);
|
|
clrbits_le32(&clk->timclk_ctrl, CLK_TIMCLK_WATCHDOG);
|
|
|
|
/* Such a long delay is needed to initialize SMSC phy */
|
|
udelay(10000);
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
lpc32xx_uart_init(CONFIG_SYS_LPC32XX_UART);
|
|
lpc32xx_i2c_init(1);
|
|
lpc32xx_i2c_init(2);
|
|
lpc32xx_ssp_init();
|
|
lpc32xx_mac_init();
|
|
|
|
/*
|
|
* nWP may be controlled by GPO19, but unpopulated by default R23
|
|
* makes no sense to configure this GPIO level, nWP is always high
|
|
*/
|
|
lpc32xx_slc_nand_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* adress of boot parameters */
|
|
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
|
|
|
#ifdef CONFIG_SYS_FLASH_CFI
|
|
/* Use 16-bit memory interface for NOR Flash */
|
|
emc->stat[0].config = EMC_STAT_CONFIG_PB | EMC_STAT_CONFIG_16BIT;
|
|
|
|
/* Change the NOR timings to optimum value to get maximum bandwidth */
|
|
emc->stat[0].waitwen = EMC_STAT_WAITWEN(1);
|
|
emc->stat[0].waitoen = EMC_STAT_WAITOEN(0);
|
|
emc->stat[0].waitrd = EMC_STAT_WAITRD(12);
|
|
emc->stat[0].waitpage = EMC_STAT_WAITPAGE(12);
|
|
emc->stat[0].waitwr = EMC_STAT_WAITWR(5);
|
|
emc->stat[0].waitturn = EMC_STAT_WAITTURN(2);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
|
|
CONFIG_SYS_SDRAM_SIZE);
|
|
|
|
return 0;
|
|
}
|