mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 18:59:44 +00:00
162c72c804
The DDR firmware binaries are not part of the U-Boot source code, so we should look for them in the build directory, where they need to be copied to before building U-Boot. The ATF binary is already fetched from the build directory, but the README files for the i.MX8M EVKs claim that it needs to be copied to the source directory (which is still true for in-tree builds, but not in general). Therefore we also fix the READMEs to use the build directory as the correct location for all additional binary files. Sined-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> |
||
|---|---|---|
| .. | ||
| imx8mm_evk.c | ||
| Kconfig | ||
| lpddr4_timing.c | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
| spl.c | ||
U-Boot for the NXP i.MX8MM EVK board Quick Start =========== - Build the ARM Trusted firmware binary - Get ddr fimware - Build U-Boot - Boot Get and Build the ARM Trusted firmware ====================================== Note: builddir is U-Boot build directory (source directory for in-tree builds) Get ATF from: https://source.codeaurora.org/external/imx/imx-atf branch: imx_4.19.35_1.0.0 $ make PLAT=imx8mm bl31 $ cp build/imx8mm/release/bl31.bin $(builddir) Get the ddr and hdmi firmware ============================= $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin $ chmod +x firmware-imx-8.0.bin $ ./firmware-imx-8.0 $ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir) Build U-Boot ============ $ export CROSS_COMPILE=aarch64-poky-linux- $ make imx8mm_evk_defconfig $ export ATF_LOAD_ADDR=0x920000 $ make flash.bin Burn the flash.bin to MicroSD card offset 33KB $sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 Boot ==== Set Boot switch to SD boot