mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
4a8c3f693e
Some boards still use xstr(). Replace remaining occurrences of xstr() by commonly used __stringify(). Signed-off-by: Anatolij Gustschin <agust@denx.de>
74 lines
2.3 KiB
C
74 lines
2.3 KiB
C
/*
|
|
* (C) Copyright 2012
|
|
* DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/*
|
|
* Valid values for CONFIG_SYS_TEXT_BASE are:
|
|
* 0xFF000000 boot low boot high (standard configuration)
|
|
* 0x00100000 boot from RAM (for testing only)
|
|
*/
|
|
#ifndef CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_TEXT_BASE 0xff000000 /* Standard: boot low */
|
|
#endif
|
|
|
|
/* Board specific flash config */
|
|
#define CONFIG_SYS_FLASH_BASE 0xff000000
|
|
#define CONFIG_SYS_FLASH_SIZE 0x01000000 /* maximum 16MB */
|
|
/* max number of sectors on one chip */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 128
|
|
|
|
/*
|
|
* Include common defines for all ifm boards
|
|
*/
|
|
#include "o2dnt-common.h"
|
|
|
|
/* GPIO configuration */
|
|
#define CONFIG_SYS_GPS_PORT_CONFIG 0x00002004 /* no CAN */
|
|
|
|
/* Other board specific configs */
|
|
#define CONFIG_NETCONSOLE
|
|
|
|
#define CONFIG_SYS_BOOTCS_CFG 0x00087801
|
|
#define CONFIG_SYS_RESET_ADDRESS 0xff000000
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x03f00000 /* 1 - 63 MB in DRAM */
|
|
|
|
#define CONFIG_BOARD_NAME "o2mnt"
|
|
#define CONFIG_BOARD_BOOTCMD "${newcmd}"
|
|
#define CONFIG_BOARD_MEM_LIMIT __stringify(62)
|
|
#define BOARD_POST_CRC32_END __stringify(0x01000000)
|
|
|
|
#ifndef CONFIG_IFM_SENSOR_TYPE
|
|
#define CONFIG_IFM_SENSOR_TYPE "O2M110"
|
|
#endif
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
CONFIG_IFM_DEFAULT_ENV_SETTINGS \
|
|
CONFIG_IFM_DEFAULT_ENV_OLD \
|
|
CONFIG_IFM_DEFAULT_ENV_NEW \
|
|
"linbot=ff060000\0" \
|
|
"lintop=ff25ffff\0" \
|
|
"rambot=ff260000\0" \
|
|
"ramtop=ffc5ffff\0" \
|
|
"jffbot=ffc60000\0" \
|
|
"jfftop=ffffffff\0" \
|
|
"ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
|
|
"ubotop=ff03ffff\0" \
|
|
"kernel_addr=0xff060000\0" \
|
|
"ramdisk_addr=0xff260000\0" \
|
|
"newcmd=run scrprot;run flash_ext2\0" \
|
|
"scrprot=protect on ${linbot} ${lintop};protect on ${rambot} " \
|
|
"${ramtop}\0" \
|
|
"flash_ext2=run ext2args addip addmem;bootm ${kernel_addr}\0" \
|
|
"ext2args=setenv bootargs root=/dev/mtdblock3 ro " \
|
|
"rootfstype=ext2\0" \
|
|
"pwm=mw f0000674 0x10006;mw f0000678 0x30000;" \
|
|
"mw f0000678 0x30001;mw f0000670 0x3\0" \
|
|
"master=mw f0000b00 0x00052006;mw f0000b0c $(IOpin);" \
|
|
"mw f0000b04 $(IOpin);mw f0000b10 0x24;run pwm\0" \
|
|
"sensortyp="CONFIG_IFM_SENSOR_TYPE"\0" \
|
|
"srelease=0.00\0"
|