u-boot/board/theobroma-systems/lion_rk3368
Quentin Schulz dae0829c6e rockchip: puma/lion: update MAINTAINERS file
Philipp does not work at Theobroma Systems anymore so let's swap
Philipp's address with mine.

Cc: Philipp Tomsich <philipp.tomsich@vrull.eu>
Cc: Quentin Schulz <foss+u-boot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
2022-01-07 09:30:44 -05:00
..
Kconfig rockchip: board: lion-rk3368: reduce env-size default to 8KiB 2018-01-02 19:12:53 +01:00
lion_rk3368.c rockchip: rk3368: Migrate to use common board file 2019-07-29 10:27:48 +08:00
MAINTAINERS rockchip: puma/lion: update MAINTAINERS file 2022-01-07 09:30:44 -05:00
Makefile SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
README rockchip: Remove ARCH= references from documentation 2020-06-02 17:27:04 -04:00

Here is the step-by-step to boot to U-Boot on RK3368-uQ7

Get the Source and build ATF
============================

  > git clone git://git.theobroma-systems.com/arm-trusted-firmware.git
  > cd arm-trusted-firmware
  > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3368 bl31
  > cp build/rk3368/release/bl31.bin ../u-boot/bl31-rk3368.bin

Configure U-Boot
================

  > cd ../u-boot
  > make lion-rk3368_defconfig

Build the TPL/SPL stage
=======================

  > make CROSS_COMPILE=aarch64-unknown-elf-

Build the full U-Boot and a FIT image including the ATF
=======================================================

  > make CROSS_COMPILE=aarch64-unknown-elf- u-boot.itb

Flash the image
===============

Copy the SPL to offset 32k and the FIT image containing the payloads
(U-Boot proper, ATF, devicetree) to offset 256k card.

SD-Card
-------

  > dd if=idbloader.img of=/dev/sdb seek=64
  > dd if=u-boot.itb of=/dev/sdb seek=512

eMMC
----

rkdeveloptool allows to flash the on-board eMMC via the USB OTG interface with
help of the Rockchip loader binary.

  > git clone https://github.com/rockchip-linux/rkdeveloptool
  > cd rkdeveloptool
  > autoreconf -i && && ./configure && make
  > git clone https://github.com/rockchip-linux/rkbin.git
  > ./rkdeveloptool db rkbin/rk33/rk3368_loader_v2.00.256.bin
  > ./rkdeveloptool wl 64 ../spl.img
  > ./rkdeveloptool wl 512 ../u-boot.itb


If everything went according to plan, you should see the following
output on UART0:

<debug_uart> U-Boot TPL board init
Trying to boot from BOOTROM
Returning to boot ROM...
Trying to boot from MMC1
NOTICE:  BL31: v1.3(release):v1.2-1320-gbf43a443
NOTICE:  BL31: Built : 18:04:47, Jul  5 2017


U-Boot 2017.07-00158-g2395e99858 (Jul 18 2017 - 21:03:31 +0200)

Model: Theobroma Systems RK3368-uQ7 SoM
DRAM:  2 GiB
MMC:   dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0
Using default environment

In:    serial@ff180000
Out:   serial@ff180000
Err:   serial@ff180000
Net:
Warning: ethernet@ff290000 (eth0) using random MAC address - d2:69:35:7e:d0:1e
eth0: ethernet@ff290000
Hit any key to stop autoboot:  2