mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-27 13:33:40 +00:00
c69cda25c9
Rename this to be consistent with the change from 'platdata'. Signed-off-by: Simon Glass <sjg@chromium.org>
479 lines
11 KiB
C
479 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) 2017 Microchip Technology Inc. All rights reserved.
|
|
*/
|
|
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <net.h>
|
|
#include <usb.h>
|
|
#include <linux/bitops.h>
|
|
#include "usb_ether.h"
|
|
#include "lan7x.h"
|
|
|
|
/* LAN78xx specific register/bit defines */
|
|
#define LAN78XX_HW_CFG_LED1_EN BIT(21) /* Muxed with EEDO */
|
|
#define LAN78XX_HW_CFG_LED0_EN BIT(20) /* Muxed with EECLK */
|
|
|
|
#define LAN78XX_USB_CFG0 0x080
|
|
#define LAN78XX_USB_CFG0_BIR BIT(6)
|
|
|
|
#define LAN78XX_BURST_CAP 0x090
|
|
|
|
#define LAN78XX_BULK_IN_DLY 0x094
|
|
|
|
#define LAN78XX_RFE_CTL 0x0B0
|
|
|
|
#define LAN78XX_FCT_RX_CTL 0x0C0
|
|
|
|
#define LAN78XX_FCT_TX_CTL 0x0C4
|
|
|
|
#define LAN78XX_FCT_RX_FIFO_END 0x0C8
|
|
|
|
#define LAN78XX_FCT_TX_FIFO_END 0x0CC
|
|
|
|
#define LAN78XX_FCT_FLOW 0x0D0
|
|
|
|
#define LAN78XX_MAF_BASE 0x400
|
|
#define LAN78XX_MAF_HIX 0x00
|
|
#define LAN78XX_MAF_LOX 0x04
|
|
#define LAN78XX_MAF_HI_BEGIN (LAN78XX_MAF_BASE + LAN78XX_MAF_HIX)
|
|
#define LAN78XX_MAF_LO_BEGIN (LAN78XX_MAF_BASE + LAN78XX_MAF_LOX)
|
|
#define LAN78XX_MAF_HI(index) (LAN78XX_MAF_BASE + (8 * (index)) + \
|
|
LAN78XX_MAF_HIX)
|
|
#define LAN78XX_MAF_LO(index) (LAN78XX_MAF_BASE + (8 * (index)) + \
|
|
LAN78XX_MAF_LOX)
|
|
#define LAN78XX_MAF_HI_VALID BIT(31)
|
|
|
|
/* OTP registers */
|
|
#define LAN78XX_OTP_BASE_ADDR 0x00001000
|
|
|
|
#define LAN78XX_OTP_PWR_DN (LAN78XX_OTP_BASE_ADDR + 4 * 0x00)
|
|
#define LAN78XX_OTP_PWR_DN_PWRDN_N BIT(0)
|
|
|
|
#define LAN78XX_OTP_ADDR1 (LAN78XX_OTP_BASE_ADDR + 4 * 0x01)
|
|
#define LAN78XX_OTP_ADDR1_15_11 0x1F
|
|
|
|
#define LAN78XX_OTP_ADDR2 (LAN78XX_OTP_BASE_ADDR + 4 * 0x02)
|
|
#define LAN78XX_OTP_ADDR2_10_3 0xFF
|
|
|
|
#define LAN78XX_OTP_RD_DATA (LAN78XX_OTP_BASE_ADDR + 4 * 0x06)
|
|
|
|
#define LAN78XX_OTP_FUNC_CMD (LAN78XX_OTP_BASE_ADDR + 4 * 0x08)
|
|
#define LAN78XX_OTP_FUNC_CMD_READ BIT(0)
|
|
|
|
#define LAN78XX_OTP_CMD_GO (LAN78XX_OTP_BASE_ADDR + 4 * 0x0A)
|
|
#define LAN78XX_OTP_CMD_GO_GO BIT(0)
|
|
|
|
#define LAN78XX_OTP_STATUS (LAN78XX_OTP_BASE_ADDR + 4 * 0x0C)
|
|
#define LAN78XX_OTP_STATUS_BUSY BIT(0)
|
|
|
|
#define LAN78XX_OTP_INDICATOR_1 0xF3
|
|
#define LAN78XX_OTP_INDICATOR_2 0xF7
|
|
|
|
/*
|
|
* Lan78xx infrastructure commands
|
|
*/
|
|
static int lan78xx_read_raw_otp(struct usb_device *udev, u32 offset,
|
|
u32 length, u8 *data)
|
|
{
|
|
int i;
|
|
int ret;
|
|
u32 buf;
|
|
|
|
ret = lan7x_read_reg(udev, LAN78XX_OTP_PWR_DN, &buf);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (buf & LAN78XX_OTP_PWR_DN_PWRDN_N) {
|
|
/* clear it and wait to be cleared */
|
|
ret = lan7x_write_reg(udev, LAN78XX_OTP_PWR_DN, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lan7x_wait_for_bit(udev, "LAN78XX_OTP_PWR_DN_PWRDN_N",
|
|
LAN78XX_OTP_PWR_DN,
|
|
LAN78XX_OTP_PWR_DN_PWRDN_N,
|
|
false, 1000, 0);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < length; i++) {
|
|
ret = lan7x_write_reg(udev, LAN78XX_OTP_ADDR1,
|
|
((offset + i) >> 8) &
|
|
LAN78XX_OTP_ADDR1_15_11);
|
|
if (ret)
|
|
return ret;
|
|
ret = lan7x_write_reg(udev, LAN78XX_OTP_ADDR2,
|
|
((offset + i) & LAN78XX_OTP_ADDR2_10_3));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lan7x_write_reg(udev, LAN78XX_OTP_FUNC_CMD,
|
|
LAN78XX_OTP_FUNC_CMD_READ);
|
|
if (ret)
|
|
return ret;
|
|
ret = lan7x_write_reg(udev, LAN78XX_OTP_CMD_GO,
|
|
LAN78XX_OTP_CMD_GO_GO);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lan7x_wait_for_bit(udev, "LAN78XX_OTP_STATUS_BUSY",
|
|
LAN78XX_OTP_STATUS,
|
|
LAN78XX_OTP_STATUS_BUSY,
|
|
false, 1000, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lan7x_read_reg(udev, LAN78XX_OTP_RD_DATA, &buf);
|
|
if (ret)
|
|
return ret;
|
|
|
|
data[i] = (u8)(buf & 0xFF);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lan78xx_read_otp(struct usb_device *udev, u32 offset,
|
|
u32 length, u8 *data)
|
|
{
|
|
u8 sig;
|
|
int ret;
|
|
|
|
ret = lan78xx_read_raw_otp(udev, 0, 1, &sig);
|
|
|
|
if (!ret) {
|
|
if (sig == LAN78XX_OTP_INDICATOR_1)
|
|
offset = offset;
|
|
else if (sig == LAN78XX_OTP_INDICATOR_2)
|
|
offset += 0x100;
|
|
else
|
|
return -EINVAL;
|
|
ret = lan78xx_read_raw_otp(udev, offset, length, data);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
debug("LAN78x: MAC address from OTP = %pM\n", data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int lan78xx_read_otp_mac(unsigned char *enetaddr,
|
|
struct usb_device *udev)
|
|
{
|
|
int ret;
|
|
|
|
memset(enetaddr, 0, 6);
|
|
|
|
ret = lan78xx_read_otp(udev,
|
|
EEPROM_MAC_OFFSET,
|
|
ETH_ALEN,
|
|
enetaddr);
|
|
if (!ret && is_valid_ethaddr(enetaddr)) {
|
|
/* eeprom values are valid so use them */
|
|
debug("MAC address read from OTP %pM\n", enetaddr);
|
|
return 0;
|
|
}
|
|
debug("MAC address read from OTP invalid %pM\n", enetaddr);
|
|
|
|
memset(enetaddr, 0, 6);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int lan78xx_update_flowcontrol(struct usb_device *udev,
|
|
struct ueth_data *dev)
|
|
{
|
|
uint32_t flow = 0, fct_flow = 0;
|
|
int ret;
|
|
|
|
ret = lan7x_update_flowcontrol(udev, dev, &flow, &fct_flow);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lan7x_write_reg(udev, LAN78XX_FCT_FLOW, fct_flow);
|
|
if (ret)
|
|
return ret;
|
|
return lan7x_write_reg(udev, FLOW, flow);
|
|
}
|
|
|
|
static int lan78xx_read_mac(unsigned char *enetaddr,
|
|
struct usb_device *udev,
|
|
struct lan7x_private *priv)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
int saved = 0, done = 0;
|
|
|
|
/*
|
|
* Depends on chip, some EEPROM pins are muxed with LED function.
|
|
* disable & restore LED function to access EEPROM.
|
|
*/
|
|
if ((priv->chipid == ID_REV_CHIP_ID_7800) ||
|
|
(priv->chipid == ID_REV_CHIP_ID_7850)) {
|
|
ret = lan7x_read_reg(udev, HW_CFG, &val);
|
|
if (ret)
|
|
return ret;
|
|
saved = val;
|
|
val &= ~(LAN78XX_HW_CFG_LED1_EN | LAN78XX_HW_CFG_LED0_EN);
|
|
ret = lan7x_write_reg(udev, HW_CFG, val);
|
|
if (ret)
|
|
goto restore;
|
|
}
|
|
|
|
/*
|
|
* Refer to the doc/README.enetaddr and doc/README.usb for
|
|
* the U-Boot MAC address policy
|
|
*/
|
|
/* try reading mac address from EEPROM, then from OTP */
|
|
ret = lan7x_read_eeprom_mac(enetaddr, udev);
|
|
if (!ret)
|
|
done = 1;
|
|
|
|
restore:
|
|
if ((priv->chipid == ID_REV_CHIP_ID_7800) ||
|
|
(priv->chipid == ID_REV_CHIP_ID_7850)) {
|
|
ret = lan7x_write_reg(udev, HW_CFG, saved);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
/* if the EEPROM mac address is good, then exit */
|
|
if (done)
|
|
return 0;
|
|
|
|
/* try reading mac address from OTP if the device is LAN78xx */
|
|
return lan78xx_read_otp_mac(enetaddr, udev);
|
|
}
|
|
|
|
static int lan78xx_set_receive_filter(struct usb_device *udev)
|
|
{
|
|
/* No multicast in u-boot for now */
|
|
return lan7x_write_reg(udev, LAN78XX_RFE_CTL,
|
|
RFE_CTL_BCAST_EN | RFE_CTL_DA_PERFECT);
|
|
}
|
|
|
|
/* starts the TX path */
|
|
static void lan78xx_start_tx_path(struct usb_device *udev)
|
|
{
|
|
/* Enable Tx at MAC */
|
|
lan7x_write_reg(udev, MAC_TX, MAC_TX_TXEN);
|
|
|
|
/* Enable Tx at SCSRs */
|
|
lan7x_write_reg(udev, LAN78XX_FCT_TX_CTL, FCT_TX_CTL_EN);
|
|
}
|
|
|
|
/* Starts the Receive path */
|
|
static void lan78xx_start_rx_path(struct usb_device *udev)
|
|
{
|
|
/* Enable Rx at MAC */
|
|
lan7x_write_reg(udev, MAC_RX,
|
|
LAN7X_MAC_RX_MAX_SIZE_DEFAULT |
|
|
MAC_RX_FCS_STRIP | MAC_RX_RXEN);
|
|
|
|
/* Enable Rx at SCSRs */
|
|
lan7x_write_reg(udev, LAN78XX_FCT_RX_CTL, FCT_RX_CTL_EN);
|
|
}
|
|
|
|
static int lan78xx_basic_reset(struct usb_device *udev,
|
|
struct ueth_data *dev,
|
|
struct lan7x_private *priv)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
ret = lan7x_basic_reset(udev, dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Keep the chip ID */
|
|
ret = lan7x_read_reg(udev, ID_REV, &val);
|
|
if (ret)
|
|
return ret;
|
|
debug("LAN78xx ID_REV = 0x%08x\n", val);
|
|
|
|
priv->chipid = (val & ID_REV_CHIP_ID_MASK) >> 16;
|
|
|
|
/* Respond to the IN token with a NAK */
|
|
ret = lan7x_read_reg(udev, LAN78XX_USB_CFG0, &val);
|
|
if (ret)
|
|
return ret;
|
|
val &= ~LAN78XX_USB_CFG0_BIR;
|
|
return lan7x_write_reg(udev, LAN78XX_USB_CFG0, val);
|
|
}
|
|
|
|
int lan78xx_write_hwaddr(struct udevice *dev)
|
|
{
|
|
struct usb_device *udev = dev_get_parent_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
unsigned char *enetaddr = pdata->enetaddr;
|
|
u32 addr_lo = get_unaligned_le32(&enetaddr[0]);
|
|
u32 addr_hi = (u32)get_unaligned_le16(&enetaddr[4]);
|
|
int ret;
|
|
|
|
/* set hardware address */
|
|
ret = lan7x_write_reg(udev, RX_ADDRL, addr_lo);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lan7x_write_reg(udev, RX_ADDRH, addr_hi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lan7x_write_reg(udev, LAN78XX_MAF_LO(0), addr_lo);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lan7x_write_reg(udev, LAN78XX_MAF_HI(0),
|
|
addr_hi | LAN78XX_MAF_HI_VALID);
|
|
if (ret)
|
|
return ret;
|
|
|
|
debug("MAC addr %pM written\n", enetaddr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lan78xx_eth_start(struct udevice *dev)
|
|
{
|
|
struct usb_device *udev = dev_get_parent_priv(dev);
|
|
struct lan7x_private *priv = dev_get_priv(dev);
|
|
|
|
int ret;
|
|
u32 write_buf;
|
|
|
|
/* Reset and read Mac addr were done in probe() */
|
|
ret = lan78xx_write_hwaddr(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lan7x_write_reg(udev, LAN78XX_BURST_CAP, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lan7x_write_reg(udev, LAN78XX_BULK_IN_DLY, DEFAULT_BULK_IN_DELAY);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lan7x_write_reg(udev, INT_STS, 0xFFFFFFFF);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* set FIFO sizes */
|
|
ret = lan7x_write_reg(udev, LAN78XX_FCT_RX_FIFO_END,
|
|
(MAX_RX_FIFO_SIZE - 512) / 512);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lan7x_write_reg(udev, LAN78XX_FCT_TX_FIFO_END,
|
|
(MAX_TX_FIFO_SIZE - 512) / 512);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Init Tx */
|
|
ret = lan7x_write_reg(udev, FLOW, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Init Rx. Set Vlan, keep default for VLAN on 78xx */
|
|
ret = lan78xx_set_receive_filter(udev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Init PHY, autonego, and link */
|
|
ret = lan7x_eth_phylib_connect(dev, &priv->ueth);
|
|
if (ret)
|
|
return ret;
|
|
ret = lan7x_eth_phylib_config_start(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* MAC_CR has to be set after PHY init.
|
|
* MAC will auto detect the PHY speed.
|
|
*/
|
|
ret = lan7x_read_reg(udev, MAC_CR, &write_buf);
|
|
if (ret)
|
|
return ret;
|
|
write_buf |= MAC_CR_AUTO_DUPLEX | MAC_CR_AUTO_SPEED | MAC_CR_ADP;
|
|
ret = lan7x_write_reg(udev, MAC_CR, write_buf);
|
|
if (ret)
|
|
return ret;
|
|
|
|
lan78xx_start_tx_path(udev);
|
|
lan78xx_start_rx_path(udev);
|
|
|
|
return lan78xx_update_flowcontrol(udev, &priv->ueth);
|
|
}
|
|
|
|
int lan78xx_read_rom_hwaddr(struct udevice *dev)
|
|
{
|
|
struct usb_device *udev = dev_get_parent_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
struct lan7x_private *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
ret = lan78xx_read_mac(pdata->enetaddr, udev, priv);
|
|
if (ret)
|
|
memset(pdata->enetaddr, 0, 6);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lan78xx_eth_probe(struct udevice *dev)
|
|
{
|
|
struct usb_device *udev = dev_get_parent_priv(dev);
|
|
struct lan7x_private *priv = dev_get_priv(dev);
|
|
struct ueth_data *ueth = &priv->ueth;
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
int ret;
|
|
|
|
/* Do a reset in order to get the MAC address from HW */
|
|
if (lan78xx_basic_reset(udev, ueth, priv))
|
|
return 0;
|
|
|
|
/* Get the MAC address */
|
|
/*
|
|
* We must set the eth->enetaddr from HW because the upper layer
|
|
* will force to use the environmental var (usbethaddr) or random if
|
|
* there is no valid MAC address in eth->enetaddr.
|
|
*/
|
|
lan78xx_read_mac(pdata->enetaddr, udev, priv);
|
|
/* Do not return 0 for not finding MAC addr in HW */
|
|
|
|
ret = usb_ether_register(dev, ueth, RX_URB_SIZE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Register phylib */
|
|
return lan7x_phylib_register(dev);
|
|
}
|
|
|
|
static const struct eth_ops lan78xx_eth_ops = {
|
|
.start = lan78xx_eth_start,
|
|
.send = lan7x_eth_send,
|
|
.recv = lan7x_eth_recv,
|
|
.free_pkt = lan7x_free_pkt,
|
|
.stop = lan7x_eth_stop,
|
|
.write_hwaddr = lan78xx_write_hwaddr,
|
|
.read_rom_hwaddr = lan78xx_read_rom_hwaddr,
|
|
};
|
|
|
|
U_BOOT_DRIVER(lan78xx_eth) = {
|
|
.name = "lan78xx_eth",
|
|
.id = UCLASS_ETH,
|
|
.probe = lan78xx_eth_probe,
|
|
.remove = lan7x_eth_remove,
|
|
.ops = &lan78xx_eth_ops,
|
|
.priv_auto = sizeof(struct lan7x_private),
|
|
.plat_auto = sizeof(struct eth_pdata),
|
|
};
|
|
|
|
static const struct usb_device_id lan78xx_eth_id_table[] = {
|
|
{ USB_DEVICE(0x0424, 0x7800) }, /* LAN7800 USB Ethernet */
|
|
{ USB_DEVICE(0x0424, 0x7850) }, /* LAN7850 USB Ethernet */
|
|
{ } /* Terminating entry */
|
|
};
|
|
|
|
U_BOOT_USB_DEVICE(lan78xx_eth, lan78xx_eth_id_table);
|