mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 21:13:48 +00:00
701c04f331
Writing of individual registers was not functioning correctly as a 0 'offset' byte under DM-managed I2C was being appended in front of register we wanted to access. Signed-off-by: Mathew McBride <matt@traverse.com.au>
264 lines
6.3 KiB
C
264 lines
6.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2007
|
|
* Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com.
|
|
*/
|
|
|
|
/*
|
|
* Epson RX8025 RTC driver.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <dm.h>
|
|
#include <i2c.h>
|
|
#include <rtc.h>
|
|
|
|
/*---------------------------------------------------------------------*/
|
|
#undef DEBUG_RTC
|
|
|
|
#ifdef DEBUG_RTC
|
|
#define DEBUGR(fmt,args...) printf(fmt ,##args)
|
|
#else
|
|
#define DEBUGR(fmt,args...)
|
|
#endif
|
|
/*---------------------------------------------------------------------*/
|
|
|
|
enum rx_model {
|
|
model_rx_8025,
|
|
model_rx_8035,
|
|
};
|
|
|
|
/*
|
|
* RTC register addresses
|
|
*/
|
|
#define RTC_SEC_REG_ADDR 0x00
|
|
#define RTC_MIN_REG_ADDR 0x01
|
|
#define RTC_HR_REG_ADDR 0x02
|
|
#define RTC_DAY_REG_ADDR 0x03
|
|
#define RTC_DATE_REG_ADDR 0x04
|
|
#define RTC_MON_REG_ADDR 0x05
|
|
#define RTC_YR_REG_ADDR 0x06
|
|
#define RTC_OFFSET_REG_ADDR 0x07
|
|
|
|
#define RTC_CTL1_REG_ADDR 0x0e
|
|
#define RTC_CTL2_REG_ADDR 0x0f
|
|
|
|
/*
|
|
* Control register 1 bits
|
|
*/
|
|
#define RTC_CTL1_BIT_2412 0x20
|
|
|
|
/*
|
|
* Control register 2 bits
|
|
*/
|
|
#define RTC_CTL2_BIT_PON 0x10
|
|
#define RTC_CTL2_BIT_VDET 0x40
|
|
#define RTC_CTL2_BIT_XST 0x20
|
|
#define RTC_CTL2_BIT_VDSL 0x80
|
|
|
|
/*
|
|
* Note: the RX8025 I2C RTC requires register
|
|
* reads and write to consist of a single bus
|
|
* cycle. It is not allowed to write the register
|
|
* address in a first cycle that is terminated by
|
|
* a STOP condition. The chips needs a 'restart'
|
|
* sequence (start sequence without a prior stop).
|
|
*/
|
|
|
|
#define rtc_read(reg) buf[(reg) & 0xf]
|
|
|
|
static int rtc_write(struct udevice *dev, uchar reg, uchar val);
|
|
|
|
static int rx8025_is_osc_stopped(enum rx_model model, int ctrl2)
|
|
{
|
|
int xstp = ctrl2 & RTC_CTL2_BIT_XST;
|
|
/* XSTP bit has different polarity on RX-8025 vs RX-8035.
|
|
* RX-8025: 0 == oscillator stopped
|
|
* RX-8035: 1 == oscillator stopped
|
|
*/
|
|
|
|
if (model == model_rx_8025)
|
|
xstp = !xstp;
|
|
|
|
return xstp;
|
|
}
|
|
|
|
/*
|
|
* Get the current time from the RTC
|
|
*/
|
|
static int rx8025_rtc_get(struct udevice *dev, struct rtc_time *tmp)
|
|
{
|
|
int rel = 0;
|
|
uchar sec, min, hour, mday, wday, mon, year, ctl2;
|
|
uchar buf[16];
|
|
|
|
if (dm_i2c_read(dev, 0, buf, sizeof(buf))) {
|
|
printf("Error reading from RTC\n");
|
|
return -EIO;
|
|
}
|
|
|
|
sec = rtc_read(RTC_SEC_REG_ADDR);
|
|
min = rtc_read(RTC_MIN_REG_ADDR);
|
|
hour = rtc_read(RTC_HR_REG_ADDR);
|
|
wday = rtc_read(RTC_DAY_REG_ADDR);
|
|
mday = rtc_read(RTC_DATE_REG_ADDR);
|
|
mon = rtc_read(RTC_MON_REG_ADDR);
|
|
year = rtc_read(RTC_YR_REG_ADDR);
|
|
|
|
DEBUGR("Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
|
|
"hr: %02x min: %02x sec: %02x\n",
|
|
year, mon, mday, wday, hour, min, sec);
|
|
|
|
/* dump status */
|
|
ctl2 = rtc_read(RTC_CTL2_REG_ADDR);
|
|
if (ctl2 & RTC_CTL2_BIT_PON) {
|
|
printf("RTC: power-on detected\n");
|
|
rel = -1;
|
|
}
|
|
|
|
if (ctl2 & RTC_CTL2_BIT_VDET) {
|
|
printf("RTC: voltage drop detected\n");
|
|
rel = -1;
|
|
}
|
|
if (rx8025_is_osc_stopped(dev->driver_data, ctl2)) {
|
|
printf("RTC: oscillator stop detected\n");
|
|
rel = -1;
|
|
}
|
|
|
|
tmp->tm_sec = bcd2bin(sec & 0x7F);
|
|
tmp->tm_min = bcd2bin(min & 0x7F);
|
|
if (rtc_read(RTC_CTL1_REG_ADDR) & RTC_CTL1_BIT_2412)
|
|
tmp->tm_hour = bcd2bin(hour & 0x3F);
|
|
else
|
|
tmp->tm_hour = bcd2bin(hour & 0x1F) % 12 +
|
|
((hour & 0x20) ? 12 : 0);
|
|
|
|
tmp->tm_mday = bcd2bin (mday & 0x3F);
|
|
tmp->tm_mon = bcd2bin (mon & 0x1F);
|
|
tmp->tm_year = bcd2bin (year) + ( bcd2bin (year) >= 70 ? 1900 : 2000);
|
|
tmp->tm_wday = bcd2bin (wday & 0x07);
|
|
tmp->tm_yday = 0;
|
|
tmp->tm_isdst= 0;
|
|
|
|
DEBUGR("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
|
|
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
|
|
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
|
|
|
|
return rel;
|
|
}
|
|
|
|
/*
|
|
* Set the RTC
|
|
*/
|
|
static int rx8025_rtc_set(struct udevice *dev, const struct rtc_time *tmp)
|
|
{
|
|
/* To work around the read/write cycle issue mentioned
|
|
* at the top of this file, write all the time registers
|
|
* in one I2C transaction
|
|
*/
|
|
u8 write_op[8];
|
|
|
|
/* 2412 flag must be set before doing a RTC write,
|
|
* otherwise the seconds and minute register
|
|
* will be cleared when the flag is set
|
|
*/
|
|
if (rtc_write(dev, RTC_CTL1_REG_ADDR, RTC_CTL1_BIT_2412))
|
|
return -EIO;
|
|
|
|
DEBUGR("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
|
|
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
|
|
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
|
|
|
|
if (tmp->tm_year < 1970 || tmp->tm_year > 2069)
|
|
printf("WARNING: year should be between 1970 and 2069!\n");
|
|
|
|
write_op[RTC_SEC_REG_ADDR] = bin2bcd(tmp->tm_sec);
|
|
write_op[RTC_MIN_REG_ADDR] = bin2bcd(tmp->tm_min);
|
|
write_op[RTC_HR_REG_ADDR] = bin2bcd(tmp->tm_hour);
|
|
write_op[RTC_DAY_REG_ADDR] = bin2bcd(tmp->tm_wday);
|
|
write_op[RTC_DATE_REG_ADDR] = bin2bcd(tmp->tm_mday);
|
|
write_op[RTC_MON_REG_ADDR] = bin2bcd(tmp->tm_mon);
|
|
write_op[RTC_YR_REG_ADDR] = bin2bcd(tmp->tm_year % 100);
|
|
write_op[RTC_OFFSET_REG_ADDR] = 0;
|
|
|
|
return dm_i2c_write(dev, 0, &write_op[0], 8);
|
|
}
|
|
|
|
/*
|
|
* Reset the RTC
|
|
*/
|
|
static int rx8025_rtc_reset(struct udevice *dev)
|
|
{
|
|
uchar buf[16];
|
|
uchar ctl2;
|
|
|
|
if (dm_i2c_read(dev, 0, buf, sizeof(buf))) {
|
|
printf("Error reading from RTC\n");
|
|
return -EIO;
|
|
}
|
|
|
|
ctl2 = rtc_read(RTC_CTL2_REG_ADDR);
|
|
ctl2 &= ~(RTC_CTL2_BIT_PON | RTC_CTL2_BIT_VDET);
|
|
|
|
if (dev->driver_data == model_rx_8035)
|
|
ctl2 &= ~(RTC_CTL2_BIT_XST);
|
|
else
|
|
ctl2 |= RTC_CTL2_BIT_XST;
|
|
|
|
return rtc_write(dev, RTC_CTL2_REG_ADDR, ctl2);
|
|
}
|
|
|
|
/*
|
|
* Helper functions
|
|
*/
|
|
static int rtc_write(struct udevice *dev, uchar reg, uchar val)
|
|
{
|
|
/* The RX8025/RX8035 uses the top 4 bits of the
|
|
* 'offset' byte as the start register address,
|
|
* and the bottom 4 bits as a 'transfer' mode setting
|
|
* (only applicable for reads)
|
|
*/
|
|
u8 offset = (reg << 4);
|
|
|
|
if (dm_i2c_reg_write(dev, offset, val)) {
|
|
printf("Error writing to RTC\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rx8025_probe(struct udevice *dev)
|
|
{
|
|
uchar buf[16];
|
|
int ret = 0;
|
|
|
|
if (i2c_get_chip_offset_len(dev) != 1)
|
|
ret = i2c_set_chip_offset_len(dev, 1);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
return dm_i2c_read(dev, 0, buf, sizeof(buf));
|
|
}
|
|
|
|
static const struct rtc_ops rx8025_rtc_ops = {
|
|
.get = rx8025_rtc_get,
|
|
.set = rx8025_rtc_set,
|
|
.reset = rx8025_rtc_reset,
|
|
};
|
|
|
|
static const struct udevice_id rx8025_rtc_ids[] = {
|
|
{ .compatible = "epson,rx8025", .data = model_rx_8025 },
|
|
{ .compatible = "epson,rx8035", .data = model_rx_8035 },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(rx8025_rtc) = {
|
|
.name = "rx8025_rtc",
|
|
.id = UCLASS_RTC,
|
|
.probe = rx8025_probe,
|
|
.of_match = rx8025_rtc_ids,
|
|
.ops = &rx8025_rtc_ops,
|
|
};
|