mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 21:13:48 +00:00
a732f621bc
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. As this is also the last in family remove the related support as well. Cc: Angelo Durgehello <angelo.dureghello@timesys.com> Signed-off-by: Tom Rini <trini@konsulko.com>
614 lines
18 KiB
C
614 lines
18 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2000-2004
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2007 Freescale Semiconductor, Inc.
|
|
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
|
|
*
|
|
* Conversion to DM
|
|
* (C) 2019 Angelo Dureghello <angelo.dureghello@timesys.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <env.h>
|
|
#include <hang.h>
|
|
#include <malloc.h>
|
|
#include <command.h>
|
|
#include <net.h>
|
|
#include <miiphy.h>
|
|
#include <asm/fec.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/immap.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mii.h>
|
|
|
|
#undef ET_DEBUG
|
|
#undef MII_DEBUG
|
|
|
|
/* Ethernet Transmit and Receive Buffers */
|
|
#define DBUF_LENGTH 1520
|
|
#define TX_BUF_CNT 2
|
|
#define PKT_MAXBUF_SIZE 1518
|
|
#define PKT_MAXBLR_SIZE 1520
|
|
#define LAST_PKTBUFSRX PKTBUFSRX - 1
|
|
#define BD_ENET_RX_W_E (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY)
|
|
#define BD_ENET_TX_RDY_LST (BD_ENET_TX_READY | BD_ENET_TX_LAST)
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static void init_eth_info(struct fec_info_s *info)
|
|
{
|
|
#ifdef CONFIG_SYS_FEC_BUF_USE_SRAM
|
|
static u32 tmp;
|
|
|
|
if (info->index == 0)
|
|
tmp = CONFIG_SYS_INIT_RAM_ADDR + 0x1000;
|
|
else
|
|
info->rxbd = (cbd_t *)DBUF_LENGTH;
|
|
|
|
/* setup Receive and Transmit buffer descriptor */
|
|
info->rxbd = (cbd_t *)((u32)info->rxbd + tmp);
|
|
tmp = (u32)info->rxbd;
|
|
info->txbd =
|
|
(cbd_t *)((u32)info->txbd + tmp +
|
|
(PKTBUFSRX * sizeof(cbd_t)));
|
|
tmp = (u32)info->txbd;
|
|
info->txbuf =
|
|
(char *)((u32)info->txbuf + tmp +
|
|
(CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
|
|
tmp = (u32)info->txbuf;
|
|
#else
|
|
info->rxbd =
|
|
(cbd_t *)memalign(CONFIG_SYS_CACHELINE_SIZE,
|
|
(PKTBUFSRX * sizeof(cbd_t)));
|
|
info->txbd =
|
|
(cbd_t *)memalign(CONFIG_SYS_CACHELINE_SIZE,
|
|
(TX_BUF_CNT * sizeof(cbd_t)));
|
|
info->txbuf =
|
|
(char *)memalign(CONFIG_SYS_CACHELINE_SIZE, DBUF_LENGTH);
|
|
#endif
|
|
|
|
#ifdef ET_DEBUG
|
|
printf("rxbd %x txbd %x\n", (int)info->rxbd, (int)info->txbd);
|
|
#endif
|
|
info->phy_name = (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, 32);
|
|
}
|
|
|
|
static void fec_reset(struct fec_info_s *info)
|
|
{
|
|
volatile fec_t *fecp = (fec_t *)(info->iobase);
|
|
int i;
|
|
|
|
fecp->ecr = FEC_ECR_RESET;
|
|
for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i)
|
|
udelay(1);
|
|
|
|
if (i == FEC_RESET_DELAY)
|
|
printf("FEC_RESET_DELAY timeout\n");
|
|
}
|
|
|
|
static void set_fec_duplex_speed(volatile fec_t *fecp, int dup_spd)
|
|
{
|
|
struct bd_info *bd = gd->bd;
|
|
|
|
if ((dup_spd >> 16) == FULL) {
|
|
/* Set maximum frame length */
|
|
fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) | FEC_RCR_MII_MODE |
|
|
FEC_RCR_PROM | 0x100;
|
|
fecp->tcr = FEC_TCR_FDEN;
|
|
} else {
|
|
/* Half duplex mode */
|
|
fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) |
|
|
FEC_RCR_MII_MODE | FEC_RCR_DRT;
|
|
fecp->tcr &= ~FEC_TCR_FDEN;
|
|
}
|
|
|
|
if ((dup_spd & 0xFFFF) == _100BASET) {
|
|
#ifdef MII_DEBUG
|
|
printf("100Mbps\n");
|
|
#endif
|
|
bd->bi_ethspeed = 100;
|
|
} else {
|
|
#ifdef MII_DEBUG
|
|
printf("10Mbps\n");
|
|
#endif
|
|
bd->bi_ethspeed = 10;
|
|
}
|
|
}
|
|
|
|
#ifdef ET_DEBUG
|
|
static void dbg_fec_regs(struct udevice *dev)
|
|
{
|
|
struct fec_info_s *info = dev_get_priv(dev);
|
|
volatile fec_t *fecp = (fec_t *)(info->iobase);
|
|
|
|
printf("=====\n");
|
|
printf("ievent %x - %x\n", (int)&fecp->eir, fecp->eir);
|
|
printf("imask %x - %x\n", (int)&fecp->eimr, fecp->eimr);
|
|
printf("r_des_active %x - %x\n", (int)&fecp->rdar, fecp->rdar);
|
|
printf("x_des_active %x - %x\n", (int)&fecp->tdar, fecp->tdar);
|
|
printf("ecntrl %x - %x\n", (int)&fecp->ecr, fecp->ecr);
|
|
printf("mii_mframe %x - %x\n", (int)&fecp->mmfr, fecp->mmfr);
|
|
printf("mii_speed %x - %x\n", (int)&fecp->mscr, fecp->mscr);
|
|
printf("mii_ctrlstat %x - %x\n", (int)&fecp->mibc, fecp->mibc);
|
|
printf("r_cntrl %x - %x\n", (int)&fecp->rcr, fecp->rcr);
|
|
printf("x_cntrl %x - %x\n", (int)&fecp->tcr, fecp->tcr);
|
|
printf("padr_l %x - %x\n", (int)&fecp->palr, fecp->palr);
|
|
printf("padr_u %x - %x\n", (int)&fecp->paur, fecp->paur);
|
|
printf("op_pause %x - %x\n", (int)&fecp->opd, fecp->opd);
|
|
printf("iadr_u %x - %x\n", (int)&fecp->iaur, fecp->iaur);
|
|
printf("iadr_l %x - %x\n", (int)&fecp->ialr, fecp->ialr);
|
|
printf("gadr_u %x - %x\n", (int)&fecp->gaur, fecp->gaur);
|
|
printf("gadr_l %x - %x\n", (int)&fecp->galr, fecp->galr);
|
|
printf("x_wmrk %x - %x\n", (int)&fecp->tfwr, fecp->tfwr);
|
|
printf("r_bound %x - %x\n", (int)&fecp->frbr, fecp->frbr);
|
|
printf("r_fstart %x - %x\n", (int)&fecp->frsr, fecp->frsr);
|
|
printf("r_drng %x - %x\n", (int)&fecp->erdsr, fecp->erdsr);
|
|
printf("x_drng %x - %x\n", (int)&fecp->etdsr, fecp->etdsr);
|
|
printf("r_bufsz %x - %x\n", (int)&fecp->emrbr, fecp->emrbr);
|
|
|
|
printf("\n");
|
|
printf("rmon_t_drop %x - %x\n", (int)&fecp->rmon_t_drop,
|
|
fecp->rmon_t_drop);
|
|
printf("rmon_t_packets %x - %x\n", (int)&fecp->rmon_t_packets,
|
|
fecp->rmon_t_packets);
|
|
printf("rmon_t_bc_pkt %x - %x\n", (int)&fecp->rmon_t_bc_pkt,
|
|
fecp->rmon_t_bc_pkt);
|
|
printf("rmon_t_mc_pkt %x - %x\n", (int)&fecp->rmon_t_mc_pkt,
|
|
fecp->rmon_t_mc_pkt);
|
|
printf("rmon_t_crc_align %x - %x\n", (int)&fecp->rmon_t_crc_align,
|
|
fecp->rmon_t_crc_align);
|
|
printf("rmon_t_undersize %x - %x\n", (int)&fecp->rmon_t_undersize,
|
|
fecp->rmon_t_undersize);
|
|
printf("rmon_t_oversize %x - %x\n", (int)&fecp->rmon_t_oversize,
|
|
fecp->rmon_t_oversize);
|
|
printf("rmon_t_frag %x - %x\n", (int)&fecp->rmon_t_frag,
|
|
fecp->rmon_t_frag);
|
|
printf("rmon_t_jab %x - %x\n", (int)&fecp->rmon_t_jab,
|
|
fecp->rmon_t_jab);
|
|
printf("rmon_t_col %x - %x\n", (int)&fecp->rmon_t_col,
|
|
fecp->rmon_t_col);
|
|
printf("rmon_t_p64 %x - %x\n", (int)&fecp->rmon_t_p64,
|
|
fecp->rmon_t_p64);
|
|
printf("rmon_t_p65to127 %x - %x\n", (int)&fecp->rmon_t_p65to127,
|
|
fecp->rmon_t_p65to127);
|
|
printf("rmon_t_p128to255 %x - %x\n", (int)&fecp->rmon_t_p128to255,
|
|
fecp->rmon_t_p128to255);
|
|
printf("rmon_t_p256to511 %x - %x\n", (int)&fecp->rmon_t_p256to511,
|
|
fecp->rmon_t_p256to511);
|
|
printf("rmon_t_p512to1023 %x - %x\n", (int)&fecp->rmon_t_p512to1023,
|
|
fecp->rmon_t_p512to1023);
|
|
printf("rmon_t_p1024to2047 %x - %x\n", (int)&fecp->rmon_t_p1024to2047,
|
|
fecp->rmon_t_p1024to2047);
|
|
printf("rmon_t_p_gte2048 %x - %x\n", (int)&fecp->rmon_t_p_gte2048,
|
|
fecp->rmon_t_p_gte2048);
|
|
printf("rmon_t_octets %x - %x\n", (int)&fecp->rmon_t_octets,
|
|
fecp->rmon_t_octets);
|
|
|
|
printf("\n");
|
|
printf("ieee_t_drop %x - %x\n", (int)&fecp->ieee_t_drop,
|
|
fecp->ieee_t_drop);
|
|
printf("ieee_t_frame_ok %x - %x\n", (int)&fecp->ieee_t_frame_ok,
|
|
fecp->ieee_t_frame_ok);
|
|
printf("ieee_t_1col %x - %x\n", (int)&fecp->ieee_t_1col,
|
|
fecp->ieee_t_1col);
|
|
printf("ieee_t_mcol %x - %x\n", (int)&fecp->ieee_t_mcol,
|
|
fecp->ieee_t_mcol);
|
|
printf("ieee_t_def %x - %x\n", (int)&fecp->ieee_t_def,
|
|
fecp->ieee_t_def);
|
|
printf("ieee_t_lcol %x - %x\n", (int)&fecp->ieee_t_lcol,
|
|
fecp->ieee_t_lcol);
|
|
printf("ieee_t_excol %x - %x\n", (int)&fecp->ieee_t_excol,
|
|
fecp->ieee_t_excol);
|
|
printf("ieee_t_macerr %x - %x\n", (int)&fecp->ieee_t_macerr,
|
|
fecp->ieee_t_macerr);
|
|
printf("ieee_t_cserr %x - %x\n", (int)&fecp->ieee_t_cserr,
|
|
fecp->ieee_t_cserr);
|
|
printf("ieee_t_sqe %x - %x\n", (int)&fecp->ieee_t_sqe,
|
|
fecp->ieee_t_sqe);
|
|
printf("ieee_t_fdxfc %x - %x\n", (int)&fecp->ieee_t_fdxfc,
|
|
fecp->ieee_t_fdxfc);
|
|
printf("ieee_t_octets_ok %x - %x\n", (int)&fecp->ieee_t_octets_ok,
|
|
fecp->ieee_t_octets_ok);
|
|
|
|
printf("\n");
|
|
printf("rmon_r_drop %x - %x\n", (int)&fecp->rmon_r_drop,
|
|
fecp->rmon_r_drop);
|
|
printf("rmon_r_packets %x - %x\n", (int)&fecp->rmon_r_packets,
|
|
fecp->rmon_r_packets);
|
|
printf("rmon_r_bc_pkt %x - %x\n", (int)&fecp->rmon_r_bc_pkt,
|
|
fecp->rmon_r_bc_pkt);
|
|
printf("rmon_r_mc_pkt %x - %x\n", (int)&fecp->rmon_r_mc_pkt,
|
|
fecp->rmon_r_mc_pkt);
|
|
printf("rmon_r_crc_align %x - %x\n", (int)&fecp->rmon_r_crc_align,
|
|
fecp->rmon_r_crc_align);
|
|
printf("rmon_r_undersize %x - %x\n", (int)&fecp->rmon_r_undersize,
|
|
fecp->rmon_r_undersize);
|
|
printf("rmon_r_oversize %x - %x\n", (int)&fecp->rmon_r_oversize,
|
|
fecp->rmon_r_oversize);
|
|
printf("rmon_r_frag %x - %x\n", (int)&fecp->rmon_r_frag,
|
|
fecp->rmon_r_frag);
|
|
printf("rmon_r_jab %x - %x\n", (int)&fecp->rmon_r_jab,
|
|
fecp->rmon_r_jab);
|
|
printf("rmon_r_p64 %x - %x\n", (int)&fecp->rmon_r_p64,
|
|
fecp->rmon_r_p64);
|
|
printf("rmon_r_p65to127 %x - %x\n", (int)&fecp->rmon_r_p65to127,
|
|
fecp->rmon_r_p65to127);
|
|
printf("rmon_r_p128to255 %x - %x\n", (int)&fecp->rmon_r_p128to255,
|
|
fecp->rmon_r_p128to255);
|
|
printf("rmon_r_p256to511 %x - %x\n", (int)&fecp->rmon_r_p256to511,
|
|
fecp->rmon_r_p256to511);
|
|
printf("rmon_r_p512to1023 %x - %x\n", (int)&fecp->rmon_r_p512to1023,
|
|
fecp->rmon_r_p512to1023);
|
|
printf("rmon_r_p1024to2047 %x - %x\n", (int)&fecp->rmon_r_p1024to2047,
|
|
fecp->rmon_r_p1024to2047);
|
|
printf("rmon_r_p_gte2048 %x - %x\n", (int)&fecp->rmon_r_p_gte2048,
|
|
fecp->rmon_r_p_gte2048);
|
|
printf("rmon_r_octets %x - %x\n", (int)&fecp->rmon_r_octets,
|
|
fecp->rmon_r_octets);
|
|
|
|
printf("\n");
|
|
printf("ieee_r_drop %x - %x\n", (int)&fecp->ieee_r_drop,
|
|
fecp->ieee_r_drop);
|
|
printf("ieee_r_frame_ok %x - %x\n", (int)&fecp->ieee_r_frame_ok,
|
|
fecp->ieee_r_frame_ok);
|
|
printf("ieee_r_crc %x - %x\n", (int)&fecp->ieee_r_crc,
|
|
fecp->ieee_r_crc);
|
|
printf("ieee_r_align %x - %x\n", (int)&fecp->ieee_r_align,
|
|
fecp->ieee_r_align);
|
|
printf("ieee_r_macerr %x - %x\n", (int)&fecp->ieee_r_macerr,
|
|
fecp->ieee_r_macerr);
|
|
printf("ieee_r_fdxfc %x - %x\n", (int)&fecp->ieee_r_fdxfc,
|
|
fecp->ieee_r_fdxfc);
|
|
printf("ieee_r_octets_ok %x - %x\n", (int)&fecp->ieee_r_octets_ok,
|
|
fecp->ieee_r_octets_ok);
|
|
|
|
printf("\n\n\n");
|
|
}
|
|
#endif
|
|
|
|
int mcffec_init(struct udevice *dev)
|
|
{
|
|
struct fec_info_s *info = dev_get_priv(dev);
|
|
volatile fec_t *fecp = (fec_t *) (info->iobase);
|
|
int rval, i;
|
|
uchar ea[6];
|
|
|
|
fecpin_setclear(info, 1);
|
|
fec_reset(info);
|
|
|
|
#if defined(CONFIG_CMD_MII) || defined (CONFIG_MII) || \
|
|
defined (CONFIG_SYS_DISCOVER_PHY)
|
|
|
|
mii_init();
|
|
|
|
set_fec_duplex_speed(fecp, info->dup_spd);
|
|
#else
|
|
#ifndef CONFIG_SYS_DISCOVER_PHY
|
|
set_fec_duplex_speed(fecp, (FECDUPLEX << 16) | FECSPEED);
|
|
#endif /* ifndef CONFIG_SYS_DISCOVER_PHY */
|
|
#endif /* CONFIG_CMD_MII || CONFIG_MII */
|
|
|
|
/* We use strictly polling mode only */
|
|
fecp->eimr = 0;
|
|
|
|
/* Clear any pending interrupt */
|
|
fecp->eir = 0xffffffff;
|
|
|
|
/* Set station address */
|
|
if (info->index == 0)
|
|
rval = eth_env_get_enetaddr("ethaddr", ea);
|
|
else
|
|
rval = eth_env_get_enetaddr("eth1addr", ea);
|
|
|
|
if (!rval) {
|
|
puts("Please set a valid MAC address\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
fecp->palr =
|
|
(ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
|
|
fecp->paur = (ea[4] << 24) | (ea[5] << 16);
|
|
|
|
/* Clear unicast address hash table */
|
|
fecp->iaur = 0;
|
|
fecp->ialr = 0;
|
|
|
|
/* Clear multicast address hash table */
|
|
fecp->gaur = 0;
|
|
fecp->galr = 0;
|
|
|
|
/* Set maximum receive buffer size. */
|
|
fecp->emrbr = PKT_MAXBLR_SIZE;
|
|
|
|
/*
|
|
* Setup Buffers and Buffer Descriptors
|
|
*/
|
|
info->rx_idx = 0;
|
|
info->tx_idx = 0;
|
|
|
|
/*
|
|
* Setup Receiver Buffer Descriptors (13.14.24.18)
|
|
* Settings:
|
|
* Empty, Wrap
|
|
*/
|
|
for (i = 0; i < PKTBUFSRX; i++) {
|
|
info->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
|
|
info->rxbd[i].cbd_datlen = 0; /* Reset */
|
|
info->rxbd[i].cbd_bufaddr = (uint) net_rx_packets[i];
|
|
}
|
|
info->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
|
|
|
|
/*
|
|
* Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
|
|
* Settings:
|
|
* Last, Tx CRC
|
|
*/
|
|
for (i = 0; i < TX_BUF_CNT; i++) {
|
|
info->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC;
|
|
info->txbd[i].cbd_datlen = 0; /* Reset */
|
|
info->txbd[i].cbd_bufaddr = (uint) (&info->txbuf[0]);
|
|
}
|
|
info->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
|
|
|
|
/* Set receive and transmit descriptor base */
|
|
fecp->erdsr = (unsigned int)(&info->rxbd[0]);
|
|
fecp->etdsr = (unsigned int)(&info->txbd[0]);
|
|
|
|
/* Now enable the transmit and receive processing */
|
|
fecp->ecr |= FEC_ECR_ETHER_EN;
|
|
|
|
/* And last, try to fill Rx Buffer Descriptors
|
|
* Descriptor polling active
|
|
*/
|
|
fecp->rdar = 0x01000000;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mcffec_send(struct udevice *dev, void *packet, int length)
|
|
{
|
|
struct fec_info_s *info = dev_get_priv(dev);
|
|
volatile fec_t *fecp = (fec_t *)info->iobase;
|
|
int j, rc;
|
|
u16 phy_status;
|
|
|
|
miiphy_read(dev->name, info->phy_addr, MII_BMSR, &phy_status);
|
|
|
|
/* section 16.9.23.3
|
|
* Wait for ready
|
|
*/
|
|
j = 0;
|
|
while ((info->txbd[info->tx_idx].cbd_sc & BD_ENET_TX_READY) &&
|
|
(j < info->to_loop)) {
|
|
udelay(1);
|
|
j++;
|
|
}
|
|
if (j >= info->to_loop)
|
|
printf("TX not ready\n");
|
|
|
|
info->txbd[info->tx_idx].cbd_bufaddr = (uint)packet;
|
|
info->txbd[info->tx_idx].cbd_datlen = length;
|
|
info->txbd[info->tx_idx].cbd_sc |= BD_ENET_TX_RDY_LST;
|
|
|
|
/* Activate transmit Buffer Descriptor polling */
|
|
fecp->tdar = 0x01000000; /* Descriptor polling active */
|
|
|
|
#ifndef CONFIG_SYS_FEC_BUF_USE_SRAM
|
|
/*
|
|
* FEC unable to initial transmit data packet.
|
|
* A nop will ensure the descriptor polling active completed.
|
|
* CF Internal RAM has shorter cycle access than DRAM. If use
|
|
* DRAM as Buffer descriptor and data, a nop is a must.
|
|
* Affect only V2 and V3.
|
|
*/
|
|
__asm__ ("nop");
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_UNIFY_CACHE
|
|
icache_invalid();
|
|
#endif
|
|
|
|
j = 0;
|
|
while ((info->txbd[info->tx_idx].cbd_sc & BD_ENET_TX_READY) &&
|
|
(j < info->to_loop)) {
|
|
udelay(1);
|
|
j++;
|
|
}
|
|
if (j >= info->to_loop)
|
|
printf("TX timeout\n");
|
|
|
|
#ifdef ET_DEBUG
|
|
printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n",
|
|
__FILE__, __LINE__, __func__, j,
|
|
info->txbd[info->tx_idx].cbd_sc,
|
|
(info->txbd[info->tx_idx].cbd_sc & 0x003C) >> 2);
|
|
#endif
|
|
|
|
/* return only status bits */
|
|
rc = (info->txbd[info->tx_idx].cbd_sc & BD_ENET_TX_STATS);
|
|
info->tx_idx = (info->tx_idx + 1) % TX_BUF_CNT;
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int mcffec_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
struct fec_info_s *info = dev_get_priv(dev);
|
|
volatile fec_t *fecp = (fec_t *)info->iobase;
|
|
int length = -1;
|
|
|
|
for (;;) {
|
|
#ifdef CONFIG_SYS_UNIFY_CACHE
|
|
icache_invalid();
|
|
#endif
|
|
/* If nothing received - leave for() loop */
|
|
if (info->rxbd[info->rx_idx].cbd_sc & BD_ENET_RX_EMPTY)
|
|
break;
|
|
|
|
length = info->rxbd[info->rx_idx].cbd_datlen;
|
|
|
|
if (info->rxbd[info->rx_idx].cbd_sc & 0x003f) {
|
|
printf("%s[%d] err: %x\n",
|
|
__func__, __LINE__,
|
|
info->rxbd[info->rx_idx].cbd_sc);
|
|
} else {
|
|
length -= 4;
|
|
|
|
/*
|
|
* Pass the buffer ptr up to the protocol layers.
|
|
*/
|
|
*packetp = net_rx_packets[info->rx_idx];
|
|
|
|
fecp->eir |= FEC_EIR_RXF;
|
|
}
|
|
|
|
/* Give the buffer back to the FEC. */
|
|
info->rxbd[info->rx_idx].cbd_datlen = 0;
|
|
|
|
/* wrap around buffer index when necessary */
|
|
if (info->rx_idx == LAST_PKTBUFSRX) {
|
|
info->rxbd[PKTBUFSRX - 1].cbd_sc = BD_ENET_RX_W_E;
|
|
info->rx_idx = 0;
|
|
} else {
|
|
info->rxbd[info->rx_idx].cbd_sc = BD_ENET_RX_EMPTY;
|
|
info->rx_idx++;
|
|
}
|
|
|
|
/* Try to fill Buffer Descriptors
|
|
* Descriptor polling active
|
|
*/
|
|
fecp->rdar = 0x01000000;
|
|
}
|
|
|
|
return length;
|
|
}
|
|
|
|
static void mcffec_halt(struct udevice *dev)
|
|
{
|
|
struct fec_info_s *info = dev_get_priv(dev);
|
|
|
|
fec_reset(info);
|
|
fecpin_setclear(info, 0);
|
|
|
|
info->rx_idx = 0;
|
|
info->tx_idx = 0;
|
|
|
|
memset(info->rxbd, 0, PKTBUFSRX * sizeof(cbd_t));
|
|
memset(info->txbd, 0, TX_BUF_CNT * sizeof(cbd_t));
|
|
memset(info->txbuf, 0, DBUF_LENGTH);
|
|
}
|
|
|
|
static const struct eth_ops mcffec_ops = {
|
|
.start = mcffec_init,
|
|
.send = mcffec_send,
|
|
.recv = mcffec_recv,
|
|
.stop = mcffec_halt,
|
|
};
|
|
|
|
/*
|
|
* Boot sequence, called just after mcffec_of_to_plat,
|
|
* as DM way, it replaces old mcffec_initialize.
|
|
*/
|
|
static int mcffec_probe(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
struct fec_info_s *info = dev_get_priv(dev);
|
|
int node = dev_of_offset(dev);
|
|
int retval, fec_idx;
|
|
const u32 *val;
|
|
|
|
info->index = dev_seq(dev);
|
|
info->iobase = pdata->iobase;
|
|
info->phy_addr = -1;
|
|
|
|
val = fdt_getprop(gd->fdt_blob, node, "mii-base", NULL);
|
|
if (val) {
|
|
u32 fec_iobase;
|
|
|
|
fec_idx = fdt32_to_cpu(*val);
|
|
if (fec_idx == info->index) {
|
|
fec_iobase = info->iobase;
|
|
} else {
|
|
printf("mii base != base address, fec_idx %d\n",
|
|
fec_idx);
|
|
retval = fec_get_base_addr(fec_idx, &fec_iobase);
|
|
if (retval)
|
|
return retval;
|
|
}
|
|
info->miibase = fec_iobase;
|
|
}
|
|
|
|
val = fdt_getprop(gd->fdt_blob, node, "phy-addr", NULL);
|
|
if (val)
|
|
info->phy_addr = fdt32_to_cpu(*val);
|
|
|
|
val = fdt_getprop(gd->fdt_blob, node, "timeout-loop", NULL);
|
|
if (val)
|
|
info->to_loop = fdt32_to_cpu(*val);
|
|
|
|
init_eth_info(info);
|
|
|
|
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
|
|
info->bus = mdio_alloc();
|
|
if (!info->bus)
|
|
return -ENOMEM;
|
|
strcpy(info->bus->name, dev->name);
|
|
info->bus->read = mcffec_miiphy_read;
|
|
info->bus->write = mcffec_miiphy_write;
|
|
|
|
retval = mdio_register(info->bus);
|
|
if (retval < 0)
|
|
return retval;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mcffec_remove(struct udevice *dev)
|
|
{
|
|
struct fec_info_s *priv = dev_get_priv(dev);
|
|
|
|
mdio_unregister(priv->bus);
|
|
mdio_free(priv->bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Boot sequence, called 1st
|
|
*/
|
|
static int mcffec_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
const u32 *val;
|
|
|
|
pdata->iobase = dev_read_addr(dev);
|
|
/* Default to 10Mbit/s */
|
|
pdata->max_speed = 10;
|
|
|
|
val = fdt_getprop(gd->fdt_blob, dev_of_offset(dev),
|
|
"max-speed", NULL);
|
|
if (val)
|
|
pdata->max_speed = fdt32_to_cpu(*val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id mcffec_ids[] = {
|
|
{ .compatible = "fsl,mcf-fec" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(mcffec) = {
|
|
.name = "mcffec",
|
|
.id = UCLASS_ETH,
|
|
.of_match = mcffec_ids,
|
|
.of_to_plat = mcffec_of_to_plat,
|
|
.probe = mcffec_probe,
|
|
.remove = mcffec_remove,
|
|
.ops = &mcffec_ops,
|
|
.priv_auto = sizeof(struct fec_info_s),
|
|
.plat_auto = sizeof(struct eth_pdata),
|
|
};
|