mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 21:13:48 +00:00
c05ed00afb
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
133 lines
3.1 KiB
C
133 lines
3.1 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2013 Broadcom Corporation.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <sdhci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/kona-common/clk.h>
|
|
|
|
#define SDHCI_CORECTRL_OFFSET 0x00008000
|
|
#define SDHCI_CORECTRL_EN 0x01
|
|
#define SDHCI_CORECTRL_RESET 0x02
|
|
|
|
#define SDHCI_CORESTAT_OFFSET 0x00008004
|
|
#define SDHCI_CORESTAT_CD_SW 0x01
|
|
|
|
#define SDHCI_COREIMR_OFFSET 0x00008008
|
|
#define SDHCI_COREIMR_IP 0x01
|
|
|
|
static int init_kona_mmc_core(struct sdhci_host *host)
|
|
{
|
|
unsigned int mask;
|
|
unsigned int timeout;
|
|
|
|
if (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & SDHCI_RESET_ALL) {
|
|
printf("%s: sd host controller reset error\n", __func__);
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* For kona a hardware reset before anything else. */
|
|
mask = sdhci_readl(host, SDHCI_CORECTRL_OFFSET) | SDHCI_CORECTRL_RESET;
|
|
sdhci_writel(host, mask, SDHCI_CORECTRL_OFFSET);
|
|
|
|
/* Wait max 100 ms */
|
|
timeout = 1000;
|
|
do {
|
|
if (timeout == 0) {
|
|
printf("%s: reset timeout error\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
timeout--;
|
|
udelay(100);
|
|
} while (0 ==
|
|
(sdhci_readl(host, SDHCI_CORECTRL_OFFSET) &
|
|
SDHCI_CORECTRL_RESET));
|
|
|
|
/* Clear the reset bit. */
|
|
mask = mask & ~SDHCI_CORECTRL_RESET;
|
|
sdhci_writel(host, mask, SDHCI_CORECTRL_OFFSET);
|
|
|
|
/* Enable AHB clock */
|
|
mask = sdhci_readl(host, SDHCI_CORECTRL_OFFSET);
|
|
sdhci_writel(host, mask | SDHCI_CORECTRL_EN, SDHCI_CORECTRL_OFFSET);
|
|
|
|
/* Enable interrupts */
|
|
sdhci_writel(host, SDHCI_COREIMR_IP, SDHCI_COREIMR_OFFSET);
|
|
|
|
/* Make sure Card is detected in controller */
|
|
mask = sdhci_readl(host, SDHCI_CORESTAT_OFFSET);
|
|
sdhci_writel(host, mask | SDHCI_CORESTAT_CD_SW, SDHCI_CORESTAT_OFFSET);
|
|
|
|
/* Wait max 100 ms */
|
|
timeout = 1000;
|
|
while (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
|
|
if (timeout == 0) {
|
|
printf("%s: CARD DETECT timeout error\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
timeout--;
|
|
udelay(100);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int kona_sdhci_init(int dev_index, u32 min_clk, u32 quirks)
|
|
{
|
|
int ret = 0;
|
|
u32 max_clk;
|
|
void *reg_base;
|
|
struct sdhci_host *host = NULL;
|
|
|
|
host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host));
|
|
if (!host) {
|
|
printf("%s: sdhci host malloc fail!\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
switch (dev_index) {
|
|
case 0:
|
|
reg_base = (void *)CONFIG_SYS_SDIO_BASE0;
|
|
ret = clk_sdio_enable(reg_base, CONFIG_SYS_SDIO0_MAX_CLK,
|
|
&max_clk);
|
|
break;
|
|
case 1:
|
|
reg_base = (void *)CONFIG_SYS_SDIO_BASE1;
|
|
ret = clk_sdio_enable(reg_base, CONFIG_SYS_SDIO1_MAX_CLK,
|
|
&max_clk);
|
|
break;
|
|
case 2:
|
|
reg_base = (void *)CONFIG_SYS_SDIO_BASE2;
|
|
ret = clk_sdio_enable(reg_base, CONFIG_SYS_SDIO2_MAX_CLK,
|
|
&max_clk);
|
|
break;
|
|
case 3:
|
|
reg_base = (void *)CONFIG_SYS_SDIO_BASE3;
|
|
ret = clk_sdio_enable(reg_base, CONFIG_SYS_SDIO3_MAX_CLK,
|
|
&max_clk);
|
|
break;
|
|
default:
|
|
printf("%s: sdio dev index %d not supported\n",
|
|
__func__, dev_index);
|
|
ret = -EINVAL;
|
|
}
|
|
if (ret) {
|
|
free(host);
|
|
return ret;
|
|
}
|
|
|
|
host->name = "kona-sdhci";
|
|
host->ioaddr = reg_base;
|
|
host->quirks = quirks;
|
|
host->max_clk = max_clk;
|
|
|
|
if (init_kona_mmc_core(host)) {
|
|
free(host);
|
|
return -EINVAL;
|
|
}
|
|
|
|
add_sdhci(host, 0, min_clk);
|
|
return ret;
|
|
}
|