mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 14:23:00 +00:00
2161f1fcb3
This patch adds uart support for MediaTek MT7620 and earlier SoCs. The UART used by MT7620 is incompatible with the ns16550a driver. All registers of this UART have different addresses. A special 16-bit register for Divisor Latch is used to set the baudrate instead of the original two 8-bit registers (DLL and DLM). The driver supports of-platdata which is useful for tiny SPL. Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
246 lines
5.2 KiB
C
246 lines
5.2 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* UART driver for MediaTek MT7620 and earlier SoCs
|
|
*
|
|
* Copyright (C) 2020 MediaTek Inc.
|
|
* Author: Weijie Gao <weijie.gao@mediatek.com>
|
|
*/
|
|
|
|
#include <clk.h>
|
|
#include <div64.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <log.h>
|
|
#include <reset.h>
|
|
#include <serial.h>
|
|
#include <watchdog.h>
|
|
#include <asm/io.h>
|
|
#include <asm/types.h>
|
|
#include <asm/addrspace.h>
|
|
#include <dm/device_compat.h>
|
|
#include <linux/err.h>
|
|
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
#include <dt-structs.h>
|
|
#endif
|
|
|
|
struct mt7620_serial_regs {
|
|
u32 rbr;
|
|
u32 thr;
|
|
u32 ier;
|
|
u32 iir;
|
|
u32 fcr;
|
|
u32 lcr;
|
|
u32 mcr;
|
|
u32 lsr;
|
|
u32 msr;
|
|
u32 scratch;
|
|
u32 dl;
|
|
u32 dll;
|
|
u32 dlm;
|
|
u32 ifctl;
|
|
};
|
|
|
|
#define UART_LCR_WLS_8 0x03 /* 8 bit character length */
|
|
|
|
#define UART_LSR_DR 0x01 /* Data ready */
|
|
#define UART_LSR_THRE 0x20 /* Xmit holding register empty */
|
|
#define UART_LSR_TEMT 0x40 /* Xmitter empty */
|
|
|
|
#define UART_MCR_DTR 0x01 /* DTR */
|
|
#define UART_MCR_RTS 0x02 /* RTS */
|
|
|
|
#define UART_FCR_FIFO_EN 0x01 /* Fifo enable */
|
|
#define UART_FCR_RXSR 0x02 /* Receiver soft reset */
|
|
#define UART_FCR_TXSR 0x04 /* Transmitter soft reset */
|
|
|
|
#define UART_MCRVAL (UART_MCR_DTR | \
|
|
UART_MCR_RTS)
|
|
|
|
/* Clear & enable FIFOs */
|
|
#define UART_FCRVAL (UART_FCR_FIFO_EN | \
|
|
UART_FCR_RXSR | \
|
|
UART_FCR_TXSR)
|
|
|
|
struct mt7620_serial_plat {
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct dtd_serial_mt7620 dtplat;
|
|
#endif
|
|
|
|
struct mt7620_serial_regs __iomem *regs;
|
|
u32 clock;
|
|
};
|
|
|
|
static void _mt7620_serial_setbrg(struct mt7620_serial_plat *plat, int baud)
|
|
{
|
|
u32 quot;
|
|
|
|
/* set divisor */
|
|
quot = DIV_ROUND_CLOSEST(plat->clock, 16 * baud);
|
|
writel(quot, &plat->regs->dl);
|
|
|
|
/* set character length and stop bits */
|
|
writel(UART_LCR_WLS_8, &plat->regs->lcr);
|
|
}
|
|
|
|
static int mt7620_serial_setbrg(struct udevice *dev, int baudrate)
|
|
{
|
|
struct mt7620_serial_plat *plat = dev_get_plat(dev);
|
|
|
|
_mt7620_serial_setbrg(plat, baudrate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt7620_serial_putc(struct udevice *dev, const char ch)
|
|
{
|
|
struct mt7620_serial_plat *plat = dev_get_plat(dev);
|
|
|
|
if (!(readl(&plat->regs->lsr) & UART_LSR_THRE))
|
|
return -EAGAIN;
|
|
|
|
writel(ch, &plat->regs->thr);
|
|
|
|
if (ch == '\n')
|
|
WATCHDOG_RESET();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt7620_serial_getc(struct udevice *dev)
|
|
{
|
|
struct mt7620_serial_plat *plat = dev_get_plat(dev);
|
|
|
|
if (!(readl(&plat->regs->lsr) & UART_LSR_DR))
|
|
return -EAGAIN;
|
|
|
|
return readl(&plat->regs->rbr);
|
|
}
|
|
|
|
static int mt7620_serial_pending(struct udevice *dev, bool input)
|
|
{
|
|
struct mt7620_serial_plat *plat = dev_get_plat(dev);
|
|
|
|
if (input)
|
|
return (readl(&plat->regs->lsr) & UART_LSR_DR) ? 1 : 0;
|
|
|
|
return (readl(&plat->regs->lsr) & UART_LSR_THRE) ? 0 : 1;
|
|
}
|
|
|
|
static int mt7620_serial_probe(struct udevice *dev)
|
|
{
|
|
struct mt7620_serial_plat *plat = dev_get_plat(dev);
|
|
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
plat->regs = (void __iomem *)KSEG1ADDR(plat->dtplat.reg[0]);
|
|
plat->clock = plat->dtplat.clock_frequency;
|
|
#endif
|
|
|
|
/* Disable interrupt */
|
|
writel(0, &plat->regs->ier);
|
|
|
|
writel(UART_MCRVAL, &plat->regs->mcr);
|
|
writel(UART_FCRVAL, &plat->regs->fcr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
static int mt7620_serial_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct mt7620_serial_plat *plat = dev_get_plat(dev);
|
|
struct reset_ctl reset_uart;
|
|
struct clk clk;
|
|
int err;
|
|
|
|
err = reset_get_by_index(dev, 0, &reset_uart);
|
|
if (!err)
|
|
reset_deassert(&reset_uart);
|
|
|
|
plat->regs = dev_remap_addr_index(dev, 0);
|
|
if (!plat->regs) {
|
|
dev_err(dev, "mt7620_serial: unable to map UART registers\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = clk_get_by_index(dev, 0, &clk);
|
|
if (!err) {
|
|
err = clk_get_rate(&clk);
|
|
if (!IS_ERR_VALUE(err))
|
|
plat->clock = err;
|
|
} else if (err != -ENOENT && err != -ENODEV && err != -ENOSYS) {
|
|
dev_err(dev, "mt7620_serial: failed to get clock\n");
|
|
return err;
|
|
}
|
|
|
|
if (!plat->clock)
|
|
plat->clock = dev_read_u32_default(dev, "clock-frequency", 0);
|
|
|
|
if (!plat->clock) {
|
|
dev_err(dev, "mt7620_serial: clock not defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id mt7620_serial_ids[] = {
|
|
{ .compatible = "mediatek,mt7620-uart" },
|
|
{ }
|
|
};
|
|
#endif
|
|
|
|
static const struct dm_serial_ops mt7620_serial_ops = {
|
|
.putc = mt7620_serial_putc,
|
|
.pending = mt7620_serial_pending,
|
|
.getc = mt7620_serial_getc,
|
|
.setbrg = mt7620_serial_setbrg,
|
|
};
|
|
|
|
U_BOOT_DRIVER(serial_mt7620) = {
|
|
.name = "serial_mt7620",
|
|
.id = UCLASS_SERIAL,
|
|
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
.of_match = mt7620_serial_ids,
|
|
.of_to_plat = mt7620_serial_of_to_plat,
|
|
#endif
|
|
.plat_auto = sizeof(struct mt7620_serial_plat),
|
|
.probe = mt7620_serial_probe,
|
|
.ops = &mt7620_serial_ops,
|
|
.flags = DM_FLAG_PRE_RELOC,
|
|
};
|
|
|
|
DM_DRIVER_ALIAS(serial_mt7620, mediatek_mt7620_uart);
|
|
|
|
#ifdef CONFIG_DEBUG_UART_MT7620
|
|
|
|
#include <debug_uart.h>
|
|
|
|
static inline void _debug_uart_init(void)
|
|
{
|
|
struct mt7620_serial_plat plat;
|
|
|
|
plat.regs = (void *)CONFIG_DEBUG_UART_BASE;
|
|
plat.clock = CONFIG_DEBUG_UART_CLOCK;
|
|
|
|
writel(0, &plat.regs->ier);
|
|
writel(UART_MCRVAL, &plat.regs->mcr);
|
|
writel(UART_FCRVAL, &plat.regs->fcr);
|
|
|
|
_mt7620_serial_setbrg(&plat, CONFIG_BAUDRATE);
|
|
}
|
|
|
|
static inline void _debug_uart_putc(int ch)
|
|
{
|
|
struct mt7620_serial_regs __iomem *regs =
|
|
(void *)CONFIG_DEBUG_UART_BASE;
|
|
|
|
while (!(readl(®s->lsr) & UART_LSR_THRE))
|
|
;
|
|
|
|
writel(ch, ®s->thr);
|
|
}
|
|
|
|
DEBUG_UART_FUNCS
|
|
|
|
#endif
|