mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 01:38:22 +00:00
4687919684
When a driver declares DM_FLAG_PRE_RELOC flag, it wishes to be bound before relocation. However due to a bug in the DM core, the flag only takes effect when devices are statically declared via U_BOOT_DEVICE(). This bug has been fixed recently by commit "dm: core: Respect drivers with the DM_FLAG_PRE_RELOC flag in lists_bind_fdt()", but with the fix, it has a side effect that all existing drivers that declared DM_FLAG_PRE_RELOC flag will be bound before relocation now. This may expose potential boot failure on some boards due to insufficient memory during the pre-relocation stage. To mitigate this potential impact, the following changes are implemented: - Remove DM_FLAG_PRE_RELOC flag in the driver, if the driver only supports configuration from device tree (OF_CONTROL) - Keep DM_FLAG_PRE_RELOC flag in the driver only if the device is statically declared via U_BOOT_DEVICE() - Surround DM_FLAG_PRE_RELOC flag with OF_CONTROL check, for drivers that support both statically declared devices and configuration from device tree Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
129 lines
3.3 KiB
C
129 lines
3.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Texas Instruments' OMAP serial driver
|
|
*
|
|
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
|
|
* Lokesh Vutla <lokeshvutla@ti.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <debug_uart.h>
|
|
#include <dm.h>
|
|
#include <dt-structs.h>
|
|
#include <ns16550.h>
|
|
#include <serial.h>
|
|
#include <clk.h>
|
|
|
|
#ifndef CONFIG_SYS_NS16550_CLK
|
|
#define CONFIG_SYS_NS16550_CLK 0
|
|
#endif
|
|
|
|
#ifdef CONFIG_DEBUG_UART_OMAP
|
|
|
|
#include <debug_uart.h>
|
|
|
|
static inline void _debug_uart_init(void)
|
|
{
|
|
struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
|
|
int baud_divisor;
|
|
|
|
baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK,
|
|
CONFIG_BAUDRATE);
|
|
serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER);
|
|
serial_dout(&com_port->mdr1, 0x7);
|
|
serial_dout(&com_port->mcr, UART_MCRVAL);
|
|
serial_dout(&com_port->fcr, UART_FCR_DEFVAL);
|
|
|
|
serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL);
|
|
serial_dout(&com_port->dll, baud_divisor & 0xff);
|
|
serial_dout(&com_port->dlm, (baud_divisor >> 8) & 0xff);
|
|
serial_dout(&com_port->lcr, UART_LCRVAL);
|
|
serial_dout(&com_port->mdr1, 0x0);
|
|
}
|
|
|
|
static inline void _debug_uart_putc(int ch)
|
|
{
|
|
struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
|
|
|
|
while (!(serial_din(&com_port->lsr) & UART_LSR_THRE))
|
|
;
|
|
serial_dout(&com_port->thr, ch);
|
|
}
|
|
|
|
DEBUG_UART_FUNCS
|
|
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(DM_SERIAL)
|
|
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
static int omap_serial_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct ns16550_platdata *plat = dev->platdata;
|
|
fdt_addr_t addr;
|
|
struct clk clk;
|
|
int err;
|
|
|
|
/* try Processor Local Bus device first */
|
|
addr = dev_read_addr(dev);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE);
|
|
|
|
plat->reg_offset = dev_read_u32_default(dev, "reg-offset", 0);
|
|
plat->reg_shift = 2;
|
|
|
|
err = clk_get_by_index(dev, 0, &clk);
|
|
if (!err) {
|
|
err = clk_get_rate(&clk);
|
|
if (!IS_ERR_VALUE(err))
|
|
plat->clock = err;
|
|
} else if (err != -ENOENT && err != -ENODEV && err != -ENOSYS) {
|
|
debug("omap serial failed to get clock\n");
|
|
return err;
|
|
}
|
|
|
|
if (!plat->clock)
|
|
plat->clock = dev_read_u32_default(dev, "clock-frequency",
|
|
CONFIG_SYS_NS16550_CLK);
|
|
if (!plat->clock) {
|
|
debug("omap serial clock not defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
plat->fcr = UART_FCR_DEFVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id omap_serial_ids[] = {
|
|
{ .compatible = "ti,omap2-uart", },
|
|
{ .compatible = "ti,omap3-uart", },
|
|
{ .compatible = "ti,omap4-uart", },
|
|
{ .compatible = "ti,am3352-uart", },
|
|
{ .compatible = "ti,am4372-uart", },
|
|
{ .compatible = "ti,dra742-uart", },
|
|
{ .compatible = "ti,am654-uart", },
|
|
{}
|
|
};
|
|
#endif /* OF_CONTROL && !OF_PLATDATA */
|
|
|
|
#if CONFIG_IS_ENABLED(SERIAL_PRESENT)
|
|
U_BOOT_DRIVER(omap_serial) = {
|
|
.name = "omap_serial",
|
|
.id = UCLASS_SERIAL,
|
|
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
.of_match = omap_serial_ids,
|
|
.ofdata_to_platdata = omap_serial_ofdata_to_platdata,
|
|
.platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
|
|
#endif
|
|
.priv_auto_alloc_size = sizeof(struct NS16550),
|
|
.probe = ns16550_serial_probe,
|
|
.ops = &ns16550_serial_ops,
|
|
#if !CONFIG_IS_ENABLED(OF_CONTROL)
|
|
.flags = DM_FLAG_PRE_RELOC,
|
|
#endif
|
|
};
|
|
#endif
|
|
#endif /* DM_SERIAL */
|