u-boot/board/xes/xpedite520x/xpedite520x.c
Simon Glass e895a4b06f fdt: Allow ft_board_setup() to report failure
This function can fail if the device tree runs out of space. Rather than
silently booting with an incomplete device tree, allow the failure to be
detected.

Unfortunately this involves changing a lot of places in the code. I have
not changed behvaiour to return an error where one is not currently
returned, to avoid unexpected breakage.

Eventually it would be nice to allow boards to register functions to be
called to update the device tree. This would avoid all the many functions
to do this. However it's not clear yet if this should be done using driver
model or with a linker list. This work is left for later.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
2014-11-21 04:43:15 +01:00

82 lines
1.9 KiB
C

/*
* Copyright 2008 Extreme Engineering Solutions, Inc.
* Copyright 2004, 2007 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <command.h>
#include <pci.h>
#include <asm/processor.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_pci.h>
#include <asm/io.h>
#include <asm/cache.h>
#include <asm/mmu.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <pca953x.h>
extern void ft_board_pci_setup(void *blob, bd_t *bd);
static void flash_cs_fixup(void)
{
int flash_sel;
/*
* Print boot dev and swap flash flash chip selects if booted from 2nd
* flash. Swapping chip selects presents user with a common memory
* map regardless of which flash was booted from.
*/
flash_sel = !((pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) &
CONFIG_SYS_PCA953X_FLASH_PASS_CS));
printf("Flash: Executed from flash%d\n", flash_sel ? 2 : 1);
if (flash_sel) {
set_lbc_br(0, CONFIG_SYS_BR1_PRELIM);
set_lbc_or(0, CONFIG_SYS_OR1_PRELIM);
set_lbc_br(1, CONFIG_SYS_BR0_PRELIM);
set_lbc_or(1, CONFIG_SYS_OR0_PRELIM);
}
}
int board_early_init_r(void)
{
/* Initialize PCA9557 devices */
pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR0, 0xff, 0);
pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR1, 0xff, 0);
/*
* Remap NOR flash region to caching-inhibited
* so that flash can be erased/programmed properly.
*/
/* Flush d-cache and invalidate i-cache of any FLASH data */
flush_dcache();
invalidate_icache();
/* Invalidate existing TLB entry for NOR flash */
disable_tlb(0);
set_tlb(1, (CONFIG_SYS_FLASH_BASE2 & 0xf0000000),
(CONFIG_SYS_FLASH_BASE2 & 0xf0000000),
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_256M, 1);
flash_cs_fixup();
return 0;
}
#if defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_PCI
ft_board_pci_setup(blob, bd);
#endif
ft_cpu_setup(blob, bd);
return 0;
}
#endif