mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 14:10:43 +00:00
903f864302
An issue in the TI secure image generation tool causes the ROM to load the SPL at a different load address than what is specified by CONFIG_ISW_ENTRY_ADDR while doing a peripheral boot on HS devices. This causes the SPL to fail on secure devices during peripheral boot. The TI secure image generation tool has been fixed so that the SPL will always be loaded at 0x403018E0 by the ROM code for both peripheral and memory boot modes. Signed-off-by: Madan Srinivas <madans@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
63 lines
1.4 KiB
Text
63 lines
1.4 KiB
Text
CONFIG_ARM=y
|
|
CONFIG_AM43XX=y
|
|
CONFIG_TI_SECURE_DEVICE=y
|
|
CONFIG_TARGET_AM43XX_EVM=y
|
|
CONFIG_DM_SERIAL=y
|
|
CONFIG_DM_GPIO=y
|
|
CONFIG_SPL_STACK_R_ADDR=0x82000000
|
|
# Device tree file can be same on HS evm
|
|
CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm"
|
|
CONFIG_SPL=y
|
|
CONFIG_ISW_ENTRY_ADDR=0x403018e0
|
|
CONFIG_SPL_STACK_R=y
|
|
CONFIG_FIT=y
|
|
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1, NAND"
|
|
CONFIG_SPL_LOAD_FIT=y
|
|
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
|
|
CONFIG_FIT_IMAGE_POST_PROCESS=y
|
|
CONFIG_HUSH_PARSER=y
|
|
CONFIG_CMD_BOOTZ=y
|
|
# CONFIG_CMD_IMLS is not set
|
|
CONFIG_CMD_ASKENV=y
|
|
# CONFIG_CMD_FLASH is not set
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_SF=y
|
|
CONFIG_CMD_SPI=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_USB=y
|
|
CONFIG_CMD_DFU=y
|
|
CONFIG_CMD_GPIO=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
CONFIG_CMD_DHCP=y
|
|
CONFIG_CMD_MII=y
|
|
CONFIG_CMD_PING=y
|
|
CONFIG_CMD_EXT2=y
|
|
CONFIG_CMD_EXT4=y
|
|
CONFIG_CMD_EXT4_WRITE=y
|
|
CONFIG_CMD_FAT=y
|
|
CONFIG_CMD_FS_GENERIC=y
|
|
CONFIG_OF_CONTROL=y
|
|
CONFIG_OF_LIST="am437x-gp-evm"
|
|
CONFIG_DM=y
|
|
CONFIG_DM_MMC=y
|
|
CONFIG_SPI_FLASH=y
|
|
CONFIG_SPI_FLASH_MACRONIX=y
|
|
CONFIG_SYS_NS16550=y
|
|
CONFIG_TI_QSPI=y
|
|
CONFIG_TIMER=y
|
|
CONFIG_OMAP_TIMER=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_XHCI_HCD=y
|
|
CONFIG_USB_XHCI_DWC3=y
|
|
CONFIG_USB_DWC3=y
|
|
CONFIG_USB_DWC3_GADGET=y
|
|
CONFIG_USB_DWC3_OMAP=y
|
|
CONFIG_USB_DWC3_PHY_OMAP=y
|
|
CONFIG_USB_GADGET=y
|
|
CONFIG_USB_GADGET_DOWNLOAD=y
|
|
CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
|
|
CONFIG_G_DNL_VENDOR_NUM=0x0403
|
|
CONFIG_G_DNL_PRODUCT_NUM=0xbd00
|
|
CONFIG_SPL_OF_LIBFDT=y
|
|
CONFIG_DM_I2C=y
|
|
CONFIG_DM_ETH=y
|