u-boot/arch/x86/cpu/qemu/pci.c
Bin Meng 4be2f42bbc x86: qemu: Adjust VGA initialization
As VGA option rom needs to run at C segment, although QEMU PAM emulation
seems to only guard E/F segments, for correctness, move VGA initialization
after PAM decode C/D/E/F segments.

Also since we already tested QEMU targets to differentiate I440FX and Q35
platforms, change to locate the VGA device via hardcoded b.d.f instead of
dynamic search for its vendor id & device id pair.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 02:39:40 -06:00

101 lines
2.7 KiB
C

/*
* Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <pci.h>
#include <pci_rom.h>
#include <asm/pci.h>
#include <asm/arch/device.h>
#include <asm/arch/qemu.h>
DECLARE_GLOBAL_DATA_PTR;
void board_pci_setup_hose(struct pci_controller *hose)
{
hose->first_busno = 0;
hose->last_busno = 0;
/* PCI memory space */
pci_set_region(hose->regions + 0,
CONFIG_PCI_MEM_BUS,
CONFIG_PCI_MEM_PHYS,
CONFIG_PCI_MEM_SIZE,
PCI_REGION_MEM);
/* PCI IO space */
pci_set_region(hose->regions + 1,
CONFIG_PCI_IO_BUS,
CONFIG_PCI_IO_PHYS,
CONFIG_PCI_IO_SIZE,
PCI_REGION_IO);
pci_set_region(hose->regions + 2,
CONFIG_PCI_PREF_BUS,
CONFIG_PCI_PREF_PHYS,
CONFIG_PCI_PREF_SIZE,
PCI_REGION_PREFETCH);
pci_set_region(hose->regions + 3,
0,
0,
gd->ram_size,
PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
hose->region_count = 4;
}
int board_pci_post_scan(struct pci_controller *hose)
{
int ret = 0;
u16 device;
int pam, i;
pci_dev_t vga;
ulong start;
/*
* i440FX and Q35 chipset have different PAM register offset, but with
* the same bitfield layout. Here we determine the offset based on its
* PCI device ID.
*/
device = x86_pci_read_config16(PCI_BDF(0, 0, 0), PCI_DEVICE_ID);
pam = (device == PCI_DEVICE_ID_INTEL_82441) ? I440FX_PAM : Q35_PAM;
/*
* Initialize Programmable Attribute Map (PAM) Registers
*
* Configure legacy segments C/D/E/F to system RAM
*/
for (i = 0; i < PAM_NUM; i++)
x86_pci_write_config8(PCI_BDF(0, 0, 0), pam + i, PAM_RW);
if (device == PCI_DEVICE_ID_INTEL_82441) {
/*
* Enable legacy IDE I/O ports decode
*
* Note: QEMU always decode legacy IDE I/O port on PIIX chipset.
* However Linux ata_piix driver does sanity check on these two
* registers to see whether legacy ports decode is turned on.
* This is to make Linux ata_piix driver happy.
*/
x86_pci_write_config16(PIIX_IDE, IDE0_TIM, IDE_DECODE_EN);
x86_pci_write_config16(PIIX_IDE, IDE1_TIM, IDE_DECODE_EN);
}
/*
* QEMU emulated graphic card shows in the PCI configuration space with
* PCI vendor id and device id as an artificial pair 0x1234:0x1111.
* It is on PCI bus 0, function 0, but device number is not consistent
* for the two x86 targets it supports. For i440FX and PIIX chipset
* board, it shows as device 2, while for Q35 and ICH9 chipset board,
* it shows as device 1.
*/
vga = (device == PCI_DEVICE_ID_INTEL_82441) ? I440FX_VGA : Q35_VGA;
start = get_timer(0);
ret = pci_run_vga_bios(vga, NULL, PCI_ROM_USE_NATIVE);
debug("BIOS ran in %lums\n", get_timer(start));
return ret;
}