mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 06:12:58 +00:00
d6ae183965
The SoC seems to lose the values of MCUDIVR, PLL3CR, PLL4CR, RCC_MSSCKSELR during suspend/resume cycle, cache them and reinstate their values on resume. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
745 lines
21 KiB
C
745 lines
21 KiB
C
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
|
|
/*
|
|
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <asm/armv7.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/gic.h>
|
|
#include <asm/io.h>
|
|
#include <asm/psci.h>
|
|
#include <asm/secure.h>
|
|
#include <hang.h>
|
|
#include <linux/bitops.h>
|
|
|
|
/* PWR */
|
|
#define PWR_CR3 0x0c
|
|
#define PWR_MPUCR 0x10
|
|
|
|
#define PWR_CR3_DDRSREN BIT(10)
|
|
#define PWR_CR3_DDRRETEN BIT(12)
|
|
|
|
#define PWR_MPUCR_PDDS BIT(0)
|
|
#define PWR_MPUCR_CSTDBYDIS BIT(3)
|
|
#define PWR_MPUCR_CSSF BIT(9)
|
|
|
|
/* RCC */
|
|
#define RCC_MSSCKSELR 0x48
|
|
#define RCC_DDRITFCR 0xd8
|
|
|
|
#define RCC_DDRITFCR_DDRC1EN BIT(0)
|
|
#define RCC_DDRITFCR_DDRC1LPEN BIT(1)
|
|
#define RCC_DDRITFCR_DDRC2EN BIT(2)
|
|
#define RCC_DDRITFCR_DDRC2LPEN BIT(3)
|
|
#define RCC_DDRITFCR_DDRPHYCEN BIT(4)
|
|
#define RCC_DDRITFCR_DDRPHYCLPEN BIT(5)
|
|
#define RCC_DDRITFCR_DDRCAPBEN BIT(6)
|
|
#define RCC_DDRITFCR_DDRCAPBLPEN BIT(7)
|
|
#define RCC_DDRITFCR_AXIDCGEN BIT(8)
|
|
#define RCC_DDRITFCR_DDRPHYCAPBEN BIT(9)
|
|
#define RCC_DDRITFCR_DDRPHYCAPBLPEN BIT(10)
|
|
#define RCC_DDRITFCR_DDRCKMOD_MASK GENMASK(22, 20)
|
|
#define RCC_DDRITFCR_GSKPCTRL BIT(24)
|
|
|
|
#define RCC_MP_SREQSETR 0x104
|
|
#define RCC_MP_SREQCLRR 0x108
|
|
|
|
#define RCC_MP_CIER 0x414
|
|
#define RCC_MP_CIFR 0x418
|
|
#define RCC_MP_CIFR_WKUPF BIT(20)
|
|
|
|
#define RCC_MCUDIVR 0x830
|
|
#define RCC_PLL3CR 0x880
|
|
#define RCC_PLL4CR 0x894
|
|
|
|
/* SYSCFG */
|
|
#define SYSCFG_CMPCR 0x20
|
|
#define SYSCFG_CMPCR_SW_CTRL BIT(2)
|
|
#define SYSCFG_CMPENSETR 0x24
|
|
#define SYSCFG_CMPENCLRR 0x28
|
|
#define SYSCFG_CMPENR_MPUEN BIT(0)
|
|
|
|
/* DDR Controller registers offsets */
|
|
#define DDRCTRL_STAT 0x004
|
|
#define DDRCTRL_PWRCTL 0x030
|
|
#define DDRCTRL_PWRTMG 0x034
|
|
#define DDRCTRL_HWLPCTL 0x038
|
|
#define DDRCTRL_DFIMISC 0x1b0
|
|
#define DDRCTRL_SWCTL 0x320
|
|
#define DDRCTRL_SWSTAT 0x324
|
|
#define DDRCTRL_PSTAT 0x3fc
|
|
#define DDRCTRL_PCTRL_0 0x490
|
|
#define DDRCTRL_PCTRL_1 0x540
|
|
|
|
/* DDR Controller Register fields */
|
|
#define DDRCTRL_STAT_OPERATING_MODE_MASK GENMASK(2, 0)
|
|
#define DDRCTRL_STAT_OPERATING_MODE_NORMAL 0x1
|
|
#define DDRCTRL_STAT_OPERATING_MODE_SR 0x3
|
|
#define DDRCTRL_STAT_SELFREF_TYPE_MASK GENMASK(5, 4)
|
|
#define DDRCTRL_STAT_SELFREF_TYPE_ASR (0x3 << 4)
|
|
#define DDRCTRL_STAT_SELFREF_TYPE_SR (0x2 << 4)
|
|
|
|
#define DDRCTRL_PWRCTL_SELFREF_EN BIT(0)
|
|
#define DDRCTRL_PWRCTL_EN_DFI_DRAM_CLK_DISABLE BIT(3)
|
|
#define DDRCTRL_PWRCTL_SELFREF_SW BIT(5)
|
|
|
|
#define DDRCTRL_PWRTMG_SELFREF_TO_X32_MASK GENMASK(23, 16)
|
|
#define DDRCTRL_PWRTMG_SELFREF_TO_X32_0 BIT(16)
|
|
|
|
#define DDRCTRL_HWLPCTL_HW_LP_EN BIT(0)
|
|
|
|
#define DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN BIT(0)
|
|
|
|
#define DDRCTRL_SWCTL_SW_DONE BIT(0)
|
|
|
|
#define DDRCTRL_SWSTAT_SW_DONE_ACK BIT(0)
|
|
|
|
#define DDRCTRL_PSTAT_RD_PORT_BUSY_0 BIT(0)
|
|
#define DDRCTRL_PSTAT_RD_PORT_BUSY_1 BIT(1)
|
|
#define DDRCTRL_PSTAT_WR_PORT_BUSY_0 BIT(16)
|
|
#define DDRCTRL_PSTAT_WR_PORT_BUSY_1 BIT(17)
|
|
|
|
#define DDRCTRL_PCTRL_N_PORT_EN BIT(0)
|
|
|
|
/* DDR PHY registers offsets */
|
|
#define DDRPHYC_PIR 0x004
|
|
#define DDRPHYC_PGSR 0x00c
|
|
#define DDRPHYC_ACDLLCR 0x014
|
|
#define DDRPHYC_ACIOCR 0x024
|
|
#define DDRPHYC_DXCCR 0x028
|
|
#define DDRPHYC_DSGCR 0x02c
|
|
#define DDRPHYC_ZQ0CR0 0x180
|
|
#define DDRPHYC_DX0DLLCR 0x1cc
|
|
#define DDRPHYC_DX1DLLCR 0x20c
|
|
#define DDRPHYC_DX2DLLCR 0x24c
|
|
#define DDRPHYC_DX3DLLCR 0x28c
|
|
|
|
/* DDR PHY Register fields */
|
|
#define DDRPHYC_PIR_INIT BIT(0)
|
|
#define DDRPHYC_PIR_DLLSRST BIT(1)
|
|
#define DDRPHYC_PIR_DLLLOCK BIT(2)
|
|
#define DDRPHYC_PIR_ITMSRST BIT(4)
|
|
|
|
#define DDRPHYC_PGSR_IDONE BIT(0)
|
|
|
|
#define DDRPHYC_ACDLLCR_DLLSRST BIT(30)
|
|
#define DDRPHYC_ACDLLCR_DLLDIS BIT(31)
|
|
|
|
#define DDRPHYC_ACIOCR_ACOE BIT(1)
|
|
#define DDRPHYC_ACIOCR_ACPDD BIT(3)
|
|
#define DDRPHYC_ACIOCR_ACPDR BIT(4)
|
|
#define DDRPHYC_ACIOCR_CKPDD_MASK GENMASK(10, 8)
|
|
#define DDRPHYC_ACIOCR_CKPDD_0 BIT(8)
|
|
#define DDRPHYC_ACIOCR_CKPDR_MASK GENMASK(13, 11)
|
|
#define DDRPHYC_ACIOCR_CKPDR_0 BIT(11)
|
|
#define DDRPHYC_ACIOCR_CSPDD_MASK GENMASK(20, 18)
|
|
#define DDRPHYC_ACIOCR_CSPDD_0 BIT(18)
|
|
|
|
#define DDRPHYC_DXCCR_DXPDD BIT(2)
|
|
#define DDRPHYC_DXCCR_DXPDR BIT(3)
|
|
|
|
#define DDRPHYC_DSGCR_CKEPDD_MASK GENMASK(19, 16)
|
|
#define DDRPHYC_DSGCR_CKEPDD_0 BIT(16)
|
|
#define DDRPHYC_DSGCR_ODTPDD_MASK GENMASK(23, 20)
|
|
#define DDRPHYC_DSGCR_ODTPDD_0 BIT(20)
|
|
#define DDRPHYC_DSGCR_NL2PD BIT(24)
|
|
#define DDRPHYC_DSGCR_CKOE BIT(28)
|
|
|
|
#define DDRPHYC_ZQ0CRN_ZQPD BIT(31)
|
|
|
|
#define DDRPHYC_DXNDLLCR_DLLDIS BIT(31)
|
|
|
|
#define BOOT_API_A7_CORE0_MAGIC_NUMBER 0xca7face0
|
|
#define BOOT_API_A7_CORE1_MAGIC_NUMBER 0xca7face1
|
|
|
|
#define MPIDR_AFF0 GENMASK(7, 0)
|
|
|
|
#define RCC_MP_GRSTCSETR (STM32_RCC_BASE + 0x0404)
|
|
#define RCC_MP_GRSTCSETR_MPSYSRST BIT(0)
|
|
#define RCC_MP_GRSTCSETR_MPUP0RST BIT(4)
|
|
#define RCC_MP_GRSTCSETR_MPUP1RST BIT(5)
|
|
|
|
#define STM32MP1_PSCI_NR_CPUS 2
|
|
#if STM32MP1_PSCI_NR_CPUS > CONFIG_ARMV7_PSCI_NR_CPUS
|
|
#error "invalid value for CONFIG_ARMV7_PSCI_NR_CPUS"
|
|
#endif
|
|
|
|
u8 psci_state[STM32MP1_PSCI_NR_CPUS] __secure_data = {
|
|
PSCI_AFFINITY_LEVEL_ON,
|
|
PSCI_AFFINITY_LEVEL_OFF};
|
|
|
|
static u32 __secure_data cntfrq;
|
|
|
|
static u32 __secure cp15_read_cntfrq(void)
|
|
{
|
|
u32 frq;
|
|
|
|
asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (frq));
|
|
|
|
return frq;
|
|
}
|
|
|
|
static void __secure cp15_write_cntfrq(u32 frq)
|
|
{
|
|
asm volatile ("mcr p15, 0, %0, c14, c0, 0" : : "r" (frq));
|
|
}
|
|
|
|
static inline void psci_set_state(int cpu, u8 state)
|
|
{
|
|
psci_state[cpu] = state;
|
|
dsb();
|
|
isb();
|
|
}
|
|
|
|
static u32 __secure stm32mp_get_gicd_base_address(void)
|
|
{
|
|
u32 periphbase;
|
|
|
|
/* get the GIC base address from the CBAR register */
|
|
asm("mrc p15, 4, %0, c15, c0, 0\n" : "=r" (periphbase));
|
|
|
|
return (periphbase & CBAR_MASK) + GIC_DIST_OFFSET;
|
|
}
|
|
|
|
static void __secure stm32mp_raise_sgi0(int cpu)
|
|
{
|
|
u32 gic_dist_addr;
|
|
|
|
gic_dist_addr = stm32mp_get_gicd_base_address();
|
|
|
|
/* ask cpu with SGI0 */
|
|
writel((BIT(cpu) << 16), gic_dist_addr + GICD_SGIR);
|
|
}
|
|
|
|
void __secure psci_arch_cpu_entry(void)
|
|
{
|
|
u32 cpu = psci_get_cpu_id();
|
|
|
|
psci_set_state(cpu, PSCI_AFFINITY_LEVEL_ON);
|
|
|
|
/* write the saved cntfrq */
|
|
cp15_write_cntfrq(cntfrq);
|
|
|
|
/* reset magic in TAMP register */
|
|
writel(0xFFFFFFFF, TAMP_BACKUP_MAGIC_NUMBER);
|
|
}
|
|
|
|
s32 __secure psci_features(u32 function_id, u32 psci_fid)
|
|
{
|
|
switch (psci_fid) {
|
|
case ARM_PSCI_0_2_FN_PSCI_VERSION:
|
|
case ARM_PSCI_0_2_FN_CPU_OFF:
|
|
case ARM_PSCI_0_2_FN_CPU_ON:
|
|
case ARM_PSCI_0_2_FN_AFFINITY_INFO:
|
|
case ARM_PSCI_0_2_FN_MIGRATE_INFO_TYPE:
|
|
case ARM_PSCI_0_2_FN_SYSTEM_OFF:
|
|
case ARM_PSCI_0_2_FN_SYSTEM_RESET:
|
|
case ARM_PSCI_1_0_FN_SYSTEM_SUSPEND:
|
|
return 0x0;
|
|
}
|
|
return ARM_PSCI_RET_NI;
|
|
}
|
|
|
|
u32 __secure psci_version(void)
|
|
{
|
|
return ARM_PSCI_VER_1_0;
|
|
}
|
|
|
|
s32 __secure psci_affinity_info(u32 function_id, u32 target_affinity,
|
|
u32 lowest_affinity_level)
|
|
{
|
|
u32 cpu = target_affinity & MPIDR_AFF0;
|
|
|
|
if (lowest_affinity_level > 0)
|
|
return ARM_PSCI_RET_INVAL;
|
|
|
|
if (target_affinity & ~MPIDR_AFF0)
|
|
return ARM_PSCI_RET_INVAL;
|
|
|
|
if (cpu >= STM32MP1_PSCI_NR_CPUS)
|
|
return ARM_PSCI_RET_INVAL;
|
|
|
|
return psci_state[cpu];
|
|
}
|
|
|
|
u32 __secure psci_migrate_info_type(void)
|
|
{
|
|
/*
|
|
* in Power_State_Coordination_Interface_PDD_v1_1_DEN0022D.pdf
|
|
* return 2 = Trusted OS is either not present or does not require
|
|
* migration, system of this type does not require the caller
|
|
* to use the MIGRATE function.
|
|
* MIGRATE function calls return NOT_SUPPORTED.
|
|
*/
|
|
return 2;
|
|
}
|
|
|
|
s32 __secure psci_cpu_on(u32 function_id, u32 target_cpu, u32 pc,
|
|
u32 context_id)
|
|
{
|
|
u32 cpu = target_cpu & MPIDR_AFF0;
|
|
|
|
if (target_cpu & ~MPIDR_AFF0)
|
|
return ARM_PSCI_RET_INVAL;
|
|
|
|
if (cpu >= STM32MP1_PSCI_NR_CPUS)
|
|
return ARM_PSCI_RET_INVAL;
|
|
|
|
if (psci_state[cpu] == PSCI_AFFINITY_LEVEL_ON)
|
|
return ARM_PSCI_RET_ALREADY_ON;
|
|
|
|
/* read and save cntfrq of current cpu to write on target cpu */
|
|
cntfrq = cp15_read_cntfrq();
|
|
|
|
/* reset magic in TAMP register */
|
|
if (readl(TAMP_BACKUP_MAGIC_NUMBER))
|
|
writel(0xFFFFFFFF, TAMP_BACKUP_MAGIC_NUMBER);
|
|
/*
|
|
* ROM code need a first SGI0 after core reset
|
|
* core is ready when magic is set to 0 in ROM code
|
|
*/
|
|
while (readl(TAMP_BACKUP_MAGIC_NUMBER))
|
|
stm32mp_raise_sgi0(cpu);
|
|
|
|
/* store target PC and context id*/
|
|
psci_save(cpu, pc, context_id);
|
|
|
|
/* write entrypoint in backup RAM register */
|
|
writel((u32)&psci_cpu_entry, TAMP_BACKUP_BRANCH_ADDRESS);
|
|
psci_set_state(cpu, PSCI_AFFINITY_LEVEL_ON_PENDING);
|
|
|
|
/* write magic number in backup register */
|
|
if (cpu == 0x01)
|
|
writel(BOOT_API_A7_CORE1_MAGIC_NUMBER,
|
|
TAMP_BACKUP_MAGIC_NUMBER);
|
|
else
|
|
writel(BOOT_API_A7_CORE0_MAGIC_NUMBER,
|
|
TAMP_BACKUP_MAGIC_NUMBER);
|
|
|
|
/* Generate an IT to start the core */
|
|
stm32mp_raise_sgi0(cpu);
|
|
|
|
return ARM_PSCI_RET_SUCCESS;
|
|
}
|
|
|
|
s32 __secure psci_cpu_off(void)
|
|
{
|
|
u32 cpu;
|
|
|
|
cpu = psci_get_cpu_id();
|
|
|
|
psci_cpu_off_common();
|
|
psci_set_state(cpu, PSCI_AFFINITY_LEVEL_OFF);
|
|
|
|
/* reset core: wfi is managed by BootRom */
|
|
if (cpu == 0x01)
|
|
writel(RCC_MP_GRSTCSETR_MPUP1RST, RCC_MP_GRSTCSETR);
|
|
else
|
|
writel(RCC_MP_GRSTCSETR_MPUP0RST, RCC_MP_GRSTCSETR);
|
|
|
|
/* just waiting reset */
|
|
while (1)
|
|
wfi();
|
|
}
|
|
|
|
void __secure psci_system_reset(void)
|
|
{
|
|
/* System reset */
|
|
writel(RCC_MP_GRSTCSETR_MPSYSRST, RCC_MP_GRSTCSETR);
|
|
/* just waiting reset */
|
|
while (1)
|
|
wfi();
|
|
}
|
|
|
|
void __secure psci_system_off(void)
|
|
{
|
|
/* System Off is not managed, waiting user power off
|
|
* TODO: handle I2C write in PMIC Main Control register bit 0 = SWOFF
|
|
*/
|
|
while (1)
|
|
wfi();
|
|
}
|
|
|
|
static void __secure secure_udelay(unsigned int delay)
|
|
{
|
|
u32 freq = cp15_read_cntfrq() / 1000000;
|
|
u64 start, end;
|
|
|
|
delay *= freq;
|
|
|
|
asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (start));
|
|
for (;;) {
|
|
asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (end));
|
|
if ((end - start) > delay)
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int __secure secure_waitbits(u32 reg, u32 mask, u32 val)
|
|
{
|
|
u32 freq = cp15_read_cntfrq() / 1000000;
|
|
u32 delay = 500 * freq; /* 500 us */
|
|
u64 start, end;
|
|
u32 tmp;
|
|
|
|
asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (start));
|
|
for (;;) {
|
|
tmp = readl(reg);
|
|
tmp &= mask;
|
|
if ((tmp & val) == val)
|
|
return 0;
|
|
asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (end));
|
|
if ((end - start) > delay)
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
static void __secure ddr_sr_mode_ssr(u32 *saved_pwrctl)
|
|
{
|
|
setbits_le32(STM32_RCC_BASE + RCC_DDRITFCR,
|
|
RCC_DDRITFCR_DDRC1LPEN | RCC_DDRITFCR_DDRC1EN |
|
|
RCC_DDRITFCR_DDRC2LPEN | RCC_DDRITFCR_DDRC2EN |
|
|
RCC_DDRITFCR_DDRCAPBLPEN | RCC_DDRITFCR_DDRPHYCAPBLPEN |
|
|
RCC_DDRITFCR_DDRCAPBEN | RCC_DDRITFCR_DDRPHYCAPBEN |
|
|
RCC_DDRITFCR_DDRPHYCEN);
|
|
|
|
clrbits_le32(STM32_RCC_BASE + RCC_DDRITFCR,
|
|
RCC_DDRITFCR_AXIDCGEN | RCC_DDRITFCR_DDRCKMOD_MASK);
|
|
|
|
/* Disable HW LP interface of uMCTL2 */
|
|
clrbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_HWLPCTL,
|
|
DDRCTRL_HWLPCTL_HW_LP_EN);
|
|
|
|
/* Configure Automatic LP modes of uMCTL2 */
|
|
clrsetbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PWRTMG,
|
|
DDRCTRL_PWRTMG_SELFREF_TO_X32_MASK,
|
|
DDRCTRL_PWRTMG_SELFREF_TO_X32_0);
|
|
|
|
/* Save PWRCTL register to restart ASR after suspend (if applicable) */
|
|
*saved_pwrctl = readl(STM32_DDRCTRL_BASE + DDRCTRL_PWRCTL);
|
|
|
|
/*
|
|
* Disable Clock disable with LP modes
|
|
* (used in RUN mode for LPDDR2 with specific timing).
|
|
*/
|
|
clrbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PWRCTL,
|
|
DDRCTRL_PWRCTL_EN_DFI_DRAM_CLK_DISABLE);
|
|
|
|
/* Disable automatic Self-Refresh mode */
|
|
clrbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PWRCTL,
|
|
DDRCTRL_PWRCTL_SELFREF_EN);
|
|
}
|
|
|
|
static void __secure ddr_sr_mode_restore(u32 saved_pwrctl)
|
|
{
|
|
saved_pwrctl &= DDRCTRL_PWRCTL_EN_DFI_DRAM_CLK_DISABLE |
|
|
DDRCTRL_PWRCTL_SELFREF_EN;
|
|
|
|
/* Restore ASR mode in case it was enabled before suspend. */
|
|
setbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PWRCTL, saved_pwrctl);
|
|
}
|
|
|
|
static int __secure ddr_sw_self_refresh_in(void)
|
|
{
|
|
int ret;
|
|
|
|
clrbits_le32(STM32_RCC_BASE + RCC_DDRITFCR, RCC_DDRITFCR_AXIDCGEN);
|
|
|
|
/* Blocks AXI ports from taking anymore transactions */
|
|
clrbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PCTRL_0,
|
|
DDRCTRL_PCTRL_N_PORT_EN);
|
|
clrbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PCTRL_1,
|
|
DDRCTRL_PCTRL_N_PORT_EN);
|
|
|
|
/*
|
|
* Waits unit all AXI ports are idle
|
|
* Poll PSTAT.rd_port_busy_n = 0
|
|
* Poll PSTAT.wr_port_busy_n = 0
|
|
*/
|
|
ret = secure_waitbits(STM32_DDRCTRL_BASE + DDRCTRL_PSTAT,
|
|
DDRCTRL_PSTAT_RD_PORT_BUSY_0 |
|
|
DDRCTRL_PSTAT_RD_PORT_BUSY_1 |
|
|
DDRCTRL_PSTAT_WR_PORT_BUSY_0 |
|
|
DDRCTRL_PSTAT_WR_PORT_BUSY_1, 0);
|
|
if (ret)
|
|
goto pstat_failed;
|
|
|
|
/* SW Self-Refresh entry */
|
|
setbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PWRCTL, DDRCTRL_PWRCTL_SELFREF_SW);
|
|
|
|
/*
|
|
* Wait operating mode change in self-refresh mode
|
|
* with STAT.operating_mode[1:0]==11.
|
|
* Ensure transition to self-refresh was due to software
|
|
* by checking also that STAT.selfref_type[1:0]=2.
|
|
*/
|
|
ret = secure_waitbits(STM32_DDRCTRL_BASE + DDRCTRL_STAT,
|
|
DDRCTRL_STAT_OPERATING_MODE_MASK |
|
|
DDRCTRL_STAT_SELFREF_TYPE_MASK,
|
|
DDRCTRL_STAT_OPERATING_MODE_SR |
|
|
DDRCTRL_STAT_SELFREF_TYPE_SR);
|
|
if (ret)
|
|
goto selfref_sw_failed;
|
|
|
|
/* IOs powering down (PUBL registers) */
|
|
setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACIOCR, DDRPHYC_ACIOCR_ACPDD);
|
|
setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACIOCR, DDRPHYC_ACIOCR_ACPDR);
|
|
|
|
clrsetbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACIOCR,
|
|
DDRPHYC_ACIOCR_CKPDD_MASK,
|
|
DDRPHYC_ACIOCR_CKPDD_0);
|
|
|
|
clrsetbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACIOCR,
|
|
DDRPHYC_ACIOCR_CKPDR_MASK,
|
|
DDRPHYC_ACIOCR_CKPDR_0);
|
|
|
|
clrsetbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACIOCR,
|
|
DDRPHYC_ACIOCR_CSPDD_MASK,
|
|
DDRPHYC_ACIOCR_CSPDD_0);
|
|
|
|
/* Disable command/address output driver */
|
|
clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACIOCR, DDRPHYC_ACIOCR_ACOE);
|
|
|
|
setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DXCCR, DDRPHYC_DXCCR_DXPDD);
|
|
|
|
setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DXCCR, DDRPHYC_DXCCR_DXPDR);
|
|
|
|
clrsetbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DSGCR,
|
|
DDRPHYC_DSGCR_ODTPDD_MASK,
|
|
DDRPHYC_DSGCR_ODTPDD_0);
|
|
|
|
setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DSGCR, DDRPHYC_DSGCR_NL2PD);
|
|
|
|
clrsetbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DSGCR,
|
|
DDRPHYC_DSGCR_CKEPDD_MASK,
|
|
DDRPHYC_DSGCR_CKEPDD_0);
|
|
|
|
/* Disable PZQ cell (PUBL register) */
|
|
setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ZQ0CR0, DDRPHYC_ZQ0CRN_ZQPD);
|
|
|
|
/* Set latch */
|
|
clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DSGCR, DDRPHYC_DSGCR_CKOE);
|
|
|
|
/* Additional delay to avoid early latch */
|
|
secure_udelay(10);
|
|
|
|
/* Activate sw retention in PWRCTRL */
|
|
setbits_le32(STM32_PWR_BASE + PWR_CR3, PWR_CR3_DDRRETEN);
|
|
|
|
/* Switch controller clocks (uMCTL2/PUBL) to DLL ref clock */
|
|
setbits_le32(STM32_RCC_BASE + RCC_DDRITFCR, RCC_DDRITFCR_GSKPCTRL);
|
|
|
|
/* Disable all DLLs: GLITCH window */
|
|
setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACDLLCR, DDRPHYC_ACDLLCR_DLLDIS);
|
|
|
|
setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DX0DLLCR, DDRPHYC_DXNDLLCR_DLLDIS);
|
|
|
|
setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DX1DLLCR, DDRPHYC_DXNDLLCR_DLLDIS);
|
|
|
|
setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DX2DLLCR, DDRPHYC_DXNDLLCR_DLLDIS);
|
|
|
|
setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DX3DLLCR, DDRPHYC_DXNDLLCR_DLLDIS);
|
|
|
|
/* Switch controller clocks (uMCTL2/PUBL) to DLL output clock */
|
|
clrbits_le32(STM32_RCC_BASE + RCC_DDRITFCR, RCC_DDRITFCR_GSKPCTRL);
|
|
|
|
/* Deactivate all DDR clocks */
|
|
clrbits_le32(STM32_RCC_BASE + RCC_DDRITFCR,
|
|
RCC_DDRITFCR_DDRC1EN | RCC_DDRITFCR_DDRC2EN |
|
|
RCC_DDRITFCR_DDRCAPBEN | RCC_DDRITFCR_DDRPHYCAPBEN);
|
|
|
|
return 0;
|
|
|
|
selfref_sw_failed:
|
|
/* This bit should be cleared to restore DDR in its previous state */
|
|
clrbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PWRCTL,
|
|
DDRCTRL_PWRCTL_SELFREF_SW);
|
|
|
|
pstat_failed:
|
|
setbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PCTRL_0,
|
|
DDRCTRL_PCTRL_N_PORT_EN);
|
|
setbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PCTRL_1,
|
|
DDRCTRL_PCTRL_N_PORT_EN);
|
|
|
|
return -EINVAL;
|
|
};
|
|
|
|
static void __secure ddr_sw_self_refresh_exit(void)
|
|
{
|
|
int ret;
|
|
|
|
/* Enable all clocks */
|
|
setbits_le32(STM32_RCC_BASE + RCC_DDRITFCR,
|
|
RCC_DDRITFCR_DDRC1EN | RCC_DDRITFCR_DDRC2EN |
|
|
RCC_DDRITFCR_DDRPHYCEN | RCC_DDRITFCR_DDRPHYCAPBEN |
|
|
RCC_DDRITFCR_DDRCAPBEN);
|
|
|
|
/* Handshake */
|
|
clrbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_SWCTL, DDRCTRL_SWCTL_SW_DONE);
|
|
|
|
/* Mask dfi_init_complete_en */
|
|
clrbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_DFIMISC,
|
|
DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN);
|
|
|
|
/* Ack */
|
|
setbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_SWCTL, DDRCTRL_SWCTL_SW_DONE);
|
|
ret = secure_waitbits(STM32_DDRCTRL_BASE + DDRCTRL_SWSTAT,
|
|
DDRCTRL_SWSTAT_SW_DONE_ACK,
|
|
DDRCTRL_SWSTAT_SW_DONE_ACK);
|
|
if (ret)
|
|
hang();
|
|
|
|
/* Switch controller clocks (uMCTL2/PUBL) to DLL ref clock */
|
|
setbits_le32(STM32_RCC_BASE + RCC_DDRITFCR, RCC_DDRITFCR_GSKPCTRL);
|
|
|
|
/* Enable all DLLs: GLITCH window */
|
|
clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACDLLCR,
|
|
DDRPHYC_ACDLLCR_DLLDIS);
|
|
|
|
clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DX0DLLCR, DDRPHYC_DXNDLLCR_DLLDIS);
|
|
|
|
clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DX1DLLCR, DDRPHYC_DXNDLLCR_DLLDIS);
|
|
|
|
clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DX2DLLCR, DDRPHYC_DXNDLLCR_DLLDIS);
|
|
|
|
clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DX3DLLCR, DDRPHYC_DXNDLLCR_DLLDIS);
|
|
|
|
/* Additional delay to avoid early DLL clock switch */
|
|
secure_udelay(50);
|
|
|
|
/* Switch controller clocks (uMCTL2/PUBL) to DLL ref clock */
|
|
clrbits_le32(STM32_RCC_BASE + RCC_DDRITFCR, RCC_DDRITFCR_GSKPCTRL);
|
|
|
|
clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACDLLCR, DDRPHYC_ACDLLCR_DLLSRST);
|
|
|
|
secure_udelay(10);
|
|
|
|
setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACDLLCR, DDRPHYC_ACDLLCR_DLLSRST);
|
|
|
|
/* PHY partial init: (DLL lock and ITM reset) */
|
|
writel(DDRPHYC_PIR_DLLSRST | DDRPHYC_PIR_DLLLOCK |
|
|
DDRPHYC_PIR_ITMSRST | DDRPHYC_PIR_INIT,
|
|
STM32_DDRPHYC_BASE + DDRPHYC_PIR);
|
|
|
|
/* Need to wait at least 10 clock cycles before accessing PGSR */
|
|
secure_udelay(1);
|
|
|
|
/* Pool end of init */
|
|
ret = secure_waitbits(STM32_DDRPHYC_BASE + DDRPHYC_PGSR,
|
|
DDRPHYC_PGSR_IDONE, DDRPHYC_PGSR_IDONE);
|
|
if (ret)
|
|
hang();
|
|
|
|
/* Handshake */
|
|
clrbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_SWCTL, DDRCTRL_SWCTL_SW_DONE);
|
|
|
|
/* Unmask dfi_init_complete_en to uMCTL2 */
|
|
setbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_DFIMISC, DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN);
|
|
|
|
/* Ack */
|
|
setbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_SWCTL, DDRCTRL_SWCTL_SW_DONE);
|
|
ret = secure_waitbits(STM32_DDRCTRL_BASE + DDRCTRL_SWSTAT,
|
|
DDRCTRL_SWSTAT_SW_DONE_ACK,
|
|
DDRCTRL_SWSTAT_SW_DONE_ACK);
|
|
if (ret)
|
|
hang();
|
|
|
|
/* Deactivate sw retention in PWR */
|
|
clrbits_le32(STM32_PWR_BASE + PWR_CR3, PWR_CR3_DDRRETEN);
|
|
|
|
/* Enable PZQ cell (PUBL register) */
|
|
clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ZQ0CR0, DDRPHYC_ZQ0CRN_ZQPD);
|
|
|
|
/* Enable pad drivers */
|
|
clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACIOCR, DDRPHYC_ACIOCR_ACPDD);
|
|
|
|
/* Enable command/address output driver */
|
|
setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACIOCR, DDRPHYC_ACIOCR_ACOE);
|
|
|
|
clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACIOCR, DDRPHYC_ACIOCR_CKPDD_MASK);
|
|
|
|
clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_ACIOCR, DDRPHYC_ACIOCR_CSPDD_MASK);
|
|
|
|
clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DXCCR, DDRPHYC_DXCCR_DXPDD);
|
|
|
|
clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DXCCR, DDRPHYC_DXCCR_DXPDR);
|
|
|
|
/* Release latch */
|
|
setbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DSGCR, DDRPHYC_DSGCR_CKOE);
|
|
|
|
clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DSGCR, DDRPHYC_DSGCR_ODTPDD_MASK);
|
|
|
|
clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DSGCR, DDRPHYC_DSGCR_NL2PD);
|
|
|
|
clrbits_le32(STM32_DDRPHYC_BASE + DDRPHYC_DSGCR, DDRPHYC_DSGCR_CKEPDD_MASK);
|
|
|
|
/* Remove selfrefresh */
|
|
clrbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PWRCTL, DDRCTRL_PWRCTL_SELFREF_SW);
|
|
|
|
/* Wait operating_mode == normal */
|
|
ret = secure_waitbits(STM32_DDRCTRL_BASE + DDRCTRL_STAT,
|
|
DDRCTRL_STAT_OPERATING_MODE_MASK,
|
|
DDRCTRL_STAT_OPERATING_MODE_NORMAL);
|
|
if (ret)
|
|
hang();
|
|
|
|
/* AXI ports are no longer blocked from taking transactions */
|
|
setbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PCTRL_0, DDRCTRL_PCTRL_N_PORT_EN);
|
|
setbits_le32(STM32_DDRCTRL_BASE + DDRCTRL_PCTRL_1, DDRCTRL_PCTRL_N_PORT_EN);
|
|
|
|
setbits_le32(STM32_RCC_BASE + RCC_DDRITFCR, RCC_DDRITFCR_AXIDCGEN);
|
|
}
|
|
|
|
void __secure psci_system_suspend(u32 __always_unused function_id,
|
|
u32 ep, u32 context_id)
|
|
{
|
|
u32 saved_mcudivr, saved_pll3cr, saved_pll4cr, saved_mssckselr;
|
|
u32 saved_pwrctl, reg;
|
|
|
|
/* Disable IO compensation */
|
|
|
|
/* Place current APSRC/ANSRC into RAPSRC/RANSRC */
|
|
reg = readl(STM32_SYSCFG_BASE + SYSCFG_CMPCR);
|
|
reg >>= 8;
|
|
reg &= 0xff << 16;
|
|
reg |= SYSCFG_CMPCR_SW_CTRL;
|
|
writel(reg, STM32_SYSCFG_BASE + SYSCFG_CMPCR);
|
|
writel(SYSCFG_CMPENR_MPUEN, STM32_SYSCFG_BASE + SYSCFG_CMPENCLRR);
|
|
|
|
writel(RCC_MP_CIFR_WKUPF, STM32_RCC_BASE + RCC_MP_CIFR);
|
|
setbits_le32(STM32_RCC_BASE + RCC_MP_CIER, RCC_MP_CIFR_WKUPF);
|
|
|
|
setbits_le32(STM32_PWR_BASE + PWR_MPUCR,
|
|
PWR_MPUCR_CSSF | PWR_MPUCR_CSTDBYDIS | PWR_MPUCR_PDDS);
|
|
|
|
saved_mcudivr = readl(STM32_RCC_BASE + RCC_MCUDIVR);
|
|
saved_pll3cr = readl(STM32_RCC_BASE + RCC_PLL3CR);
|
|
saved_pll4cr = readl(STM32_RCC_BASE + RCC_PLL4CR);
|
|
saved_mssckselr = readl(STM32_RCC_BASE + RCC_MSSCKSELR);
|
|
|
|
psci_v7_flush_dcache_all();
|
|
ddr_sr_mode_ssr(&saved_pwrctl);
|
|
ddr_sw_self_refresh_in();
|
|
setbits_le32(STM32_PWR_BASE + PWR_CR3, PWR_CR3_DDRSREN);
|
|
writel(0x3, STM32_RCC_BASE + RCC_MP_SREQSETR);
|
|
|
|
/* Zzz, enter stop mode */
|
|
asm volatile(
|
|
"isb\n"
|
|
"dsb\n"
|
|
"wfi\n");
|
|
|
|
writel(0x3, STM32_RCC_BASE + RCC_MP_SREQCLRR);
|
|
ddr_sw_self_refresh_exit();
|
|
ddr_sr_mode_restore(saved_pwrctl);
|
|
|
|
writel(saved_mcudivr, STM32_RCC_BASE + RCC_MCUDIVR);
|
|
writel(saved_pll3cr, STM32_RCC_BASE + RCC_PLL3CR);
|
|
writel(saved_pll4cr, STM32_RCC_BASE + RCC_PLL4CR);
|
|
writel(saved_mssckselr, STM32_RCC_BASE + RCC_MSSCKSELR);
|
|
|
|
writel(SYSCFG_CMPENR_MPUEN, STM32_SYSCFG_BASE + SYSCFG_CMPENSETR);
|
|
clrbits_le32(STM32_SYSCFG_BASE + SYSCFG_CMPCR, SYSCFG_CMPCR_SW_CTRL);
|
|
}
|