u-boot/arch/arm/config.mk
Philipp Tomsich 4b0d506ed3 ARMv8: add GOT sections to the list of sections copied
Recent Linux distributions (e.g. Debian 9) include cross-compilers for
AArch64, but only for the aarch64-linux-gnu triplet only. It can thus
be expected that users will attempt to use the system cross-compiler
(instead of an aarch64-elf variant) to compile U-Boot for their ARMv8
target systems.

One key differences between an aarch64-linux-gnu and an aarch64-elf
compiler are the default settings regarding position-independent: with
the aarch64-linux-gnu compiler, the default will create and use the
global offset table.

This change-set adjusts the list of sections copied on ARMv8 to include
the GOT sections. With this added, the list matches the previous setup
for AArch32 closely.

Note that this is not an 'academic' issue, but was in fact encountered
by our QA during testing of the RK3399-Q7 BSP and resulted in an
early failure of the SPL stage during FDT setup.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2017-04-08 09:26:46 -04:00

156 lines
4.3 KiB
Makefile

#
# (C) Copyright 2000-2002
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
ifndef CONFIG_STANDALONE_LOAD_ADDR
ifneq ($(CONFIG_ARCH_OMAP2),)
CONFIG_STANDALONE_LOAD_ADDR = 0x80300000
else
CONFIG_STANDALONE_LOAD_ADDR = 0xc100000
endif
endif
CFLAGS_NON_EFI := -fno-pic -ffixed-r9 -ffunction-sections -fdata-sections
CFLAGS_EFI := -fpic -fshort-wchar
LDFLAGS_FINAL += --gc-sections
PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections \
-fno-common -ffixed-r9
PLATFORM_RELFLAGS += $(call cc-option, -msoft-float) \
$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
# LLVM support
LLVMS_RELFLAGS := $(call cc-option,-mllvm,) \
$(call cc-option,-target arm-none-eabi,) \
$(call cc-option,-arm-use-movt=0,)
PLATFORM_RELFLAGS += $(LLVM_RELFLAGS)
PLATFORM_CPPFLAGS += -D__ARM__
# Choose between ARM/Thumb instruction sets
ifeq ($(CONFIG_$(SPL_)SYS_THUMB_BUILD),y)
AFLAGS_IMPLICIT_IT := $(call as-option,-Wa$(comma)-mimplicit-it=always)
PF_CPPFLAGS_ARM := $(AFLAGS_IMPLICIT_IT) \
$(call cc-option, -mthumb -mthumb-interwork,\
$(call cc-option,-marm,)\
$(call cc-option,-mno-thumb-interwork,)\
)
else
PF_CPPFLAGS_ARM := $(call cc-option,-marm,) \
$(call cc-option,-mno-thumb-interwork,)
endif
# Only test once
ifeq ($(CONFIG_$(SPL_)SYS_THUMB_BUILD),y)
archprepare: checkthumb
checkthumb:
@if test "$(call cc-name)" = "gcc" -a \
"$(call cc-version)" -lt "0404"; then \
echo -n '*** Your GCC does not produce working '; \
echo 'binaries in THUMB mode.'; \
echo '*** Your board is configured for THUMB mode.'; \
false; \
fi
endif
# Try if EABI is supported, else fall back to old API,
# i. e. for example:
# - with ELDK 4.2 (EABI supported), use:
# -mabi=aapcs-linux
# - with ELDK 4.1 (gcc 4.x, no EABI), use:
# -mabi=apcs-gnu
# - with ELDK 3.1 (gcc 3.x), use:
# -mapcs-32
PF_CPPFLAGS_ABI := $(call cc-option,\
-mabi=aapcs-linux,\
$(call cc-option,\
-mapcs-32,\
$(call cc-option,\
-mabi=apcs-gnu,\
)\
)\
)
PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARM) $(PF_CPPFLAGS_ABI)
# For EABI, make sure to provide raise()
ifneq (,$(findstring -mabi=aapcs-linux,$(PLATFORM_CPPFLAGS)))
# This file is parsed many times, so the string may get added multiple
# times. Also, the prefix needs to be different based on whether
# CONFIG_SPL_BUILD is defined or not. 'filter-out' the existing entry
# before adding the correct one.
PLATFORM_LIBS := arch/arm/lib/eabi_compat.o \
$(filter-out arch/arm/lib/eabi_compat.o, $(PLATFORM_LIBS))
endif
# needed for relocation
LDFLAGS_u-boot += -pie
#
# FIXME: binutils versions < 2.22 have a bug in the assembler where
# branches to weak symbols can be incorrectly optimized in thumb mode
# to a short branch (b.n instruction) that won't reach when the symbol
# gets preempted
#
# http://sourceware.org/bugzilla/show_bug.cgi?id=12532
#
ifeq ($(CONFIG_$(SPL_)SYS_THUMB_BUILD),y)
ifeq ($(GAS_BUG_12532),)
export GAS_BUG_12532:=$(shell if [ $(call binutils-version) -lt 0222 ] ; \
then echo y; else echo n; fi)
endif
ifeq ($(GAS_BUG_12532),y)
PLATFORM_RELFLAGS += -fno-optimize-sibling-calls
endif
endif
ifneq ($(CONFIG_SPL_BUILD),y)
# Check that only R_ARM_RELATIVE relocations are generated.
ALL-y += checkarmreloc
# The movt / movw can hardcode 16 bit parts of the addresses in the
# instruction. Relocation is not supported for that case, so disable
# such usage by requiring word relocations.
PLATFORM_CPPFLAGS += $(call cc-option, -mword-relocations)
PLATFORM_CPPFLAGS += $(call cc-option, -fno-pic)
endif
# limit ourselves to the sections we want in the .bin.
ifdef CONFIG_ARM64
OBJCOPYFLAGS += -j .text -j .secure_text -j .secure_data -j .rodata -j .data \
-j .u_boot_list -j .rela.dyn -j .got -j .got.plt
else
OBJCOPYFLAGS += -j .text -j .secure_text -j .secure_data -j .rodata -j .hash \
-j .data -j .got -j .got.plt -j .u_boot_list -j .rel.dyn
endif
ifdef CONFIG_OF_EMBED
OBJCOPYFLAGS += -j .dtb.init.rodata
endif
ifdef CONFIG_EFI_LOADER
OBJCOPYFLAGS += -j .efi_runtime -j .efi_runtime_rel
endif
ifneq ($(CONFIG_IMX_CONFIG),)
ifdef CONFIG_SPL
ifndef CONFIG_SPL_BUILD
ALL-y += SPL
endif
else
ifeq ($(CONFIG_OF_SEPARATE),y)
ALL-y += u-boot-dtb.imx
else
ALL-y += u-boot.imx
endif
endif
ifneq ($(CONFIG_VF610),)
ALL-y += u-boot.vyb
endif
endif
EFI_LDS := elf_arm_efi.lds
EFI_CRT0 := crt0_arm_efi.o
EFI_RELOC := reloc_arm_efi.o