u-boot/include/configs/colibri_pxa270.h
Adam Ford 1bf330150c Convert CONFIG_ARCH_CPU_INIT to Kconfig
This converts the following to Kconfig:
   CONFIG_ARCH_CPU_INIT

Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Felix Brack <fb@ltec.ch>
2019-08-25 19:32:55 -04:00

184 lines
4.6 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Toradex Colibri PXA270 configuration file
*
* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
* Copyright (C) 2015-2016 Marcel Ziswiler <marcel@ziswiler.com>
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Board Configuration Options
*/
#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */
/* Avoid overwriting factory configuration block */
#define CONFIG_BOARD_SIZE_LIMIT 0x40000
/*
* Environment settings
*/
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
#define CONFIG_BOOTCOMMAND \
"if fatload mmc 0 0xa0000000 uImage; then " \
"bootm 0xa0000000; " \
"fi; " \
"if usb reset && fatload usb 0 0xa0000000 uImage; then " \
"bootm 0xa0000000; " \
"fi; " \
"bootm 0xc0000;"
#define CONFIG_TIMESTAMP
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
/*
* Serial Console Configuration
*/
/*
* Bootloader Components Configuration
*/
/* I2C support */
#ifdef CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_PXA
#define CONFIG_PXA_STD_I2C
#define CONFIG_PXA_PWR_I2C
#define CONFIG_SYS_I2C_SPEED 100000
#endif
/* LCD support */
#ifdef CONFIG_LCD
#define CONFIG_PXA_LCD
#define CONFIG_PXA_VGA
#define CONFIG_LCD_LOGO
#endif
/*
* Networking Configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_DRIVER_DM9000 1
#define CONFIG_DM9000_BASE 0x08000000
#define DM9000_IO (CONFIG_DM9000_BASE)
#define DM9000_DATA (CONFIG_DM9000_BASE + 4)
#define CONFIG_NET_RETRY_COUNT 10
#define CONFIG_BOOTP_BOOTFILESIZE
#endif
#define CONFIG_SYS_DEVICE_NULLDEV 1
/*
* Clock Configuration
*/
#define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */
/*
* DRAM Map
*/
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */
#define CONFIG_SYS_DRAM_SIZE 0x04000000 /* 64 MB DRAM */
#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000
/*
* NOR FLASH
*/
#ifdef CONFIG_CMD_FLASH
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT
#define CONFIG_SYS_MAX_FLASH_SECT (4 + 255)
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_FLASH_ERASE_TOUT (25 * CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_WRITE_TOUT (25 * CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_LOCK_TOUT (25 * CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_UNLOCK_TOUT (25 * CONFIG_SYS_HZ)
#endif
#define CONFIG_SYS_MONITOR_BASE 0x0
#define CONFIG_SYS_MONITOR_LEN 0x40000
/* Skip factory configuration block */
#define CONFIG_ENV_ADDR \
(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN + 0x40000)
#define CONFIG_ENV_SIZE 0x40000
#define CONFIG_ENV_SECT_SIZE 0x40000
/*
* GPIO settings
*/
#define CONFIG_SYS_GPSR0_VAL 0x00000000
#define CONFIG_SYS_GPSR1_VAL 0x00020000
#define CONFIG_SYS_GPSR2_VAL 0x0002c000
#define CONFIG_SYS_GPSR3_VAL 0x00000000
#define CONFIG_SYS_GPCR0_VAL 0x00000000
#define CONFIG_SYS_GPCR1_VAL 0x00000000
#define CONFIG_SYS_GPCR2_VAL 0x00000000
#define CONFIG_SYS_GPCR3_VAL 0x00000000
#define CONFIG_SYS_GPDR0_VAL 0xc8008000
#define CONFIG_SYS_GPDR1_VAL 0xfc02a981
#define CONFIG_SYS_GPDR2_VAL 0x92c3ffff
#define CONFIG_SYS_GPDR3_VAL 0x0061e804
#define CONFIG_SYS_GAFR0_L_VAL 0x80100000
#define CONFIG_SYS_GAFR0_U_VAL 0xa5c00010
#define CONFIG_SYS_GAFR1_L_VAL 0x6992901a
#define CONFIG_SYS_GAFR1_U_VAL 0xaaa50008
#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa
#define CONFIG_SYS_GAFR2_U_VAL 0x4109a002
#define CONFIG_SYS_GAFR3_L_VAL 0x54000310
#define CONFIG_SYS_GAFR3_U_VAL 0x00005401
#define CONFIG_SYS_PSSR_VAL 0x30
/*
* Clock settings
*/
#define CONFIG_SYS_CKEN 0x00500240
#define CONFIG_SYS_CCCR 0x02000290
/*
* Memory settings
*/
#define CONFIG_SYS_MSC0_VAL 0x9ee1c5f2
#define CONFIG_SYS_MSC1_VAL 0x9ee1f994
#define CONFIG_SYS_MSC2_VAL 0x9ee19ee1
#define CONFIG_SYS_MDCNFG_VAL 0x090009c9
#define CONFIG_SYS_MDREFR_VAL 0x2003a031
#define CONFIG_SYS_MDMRS_VAL 0x00220022
#define CONFIG_SYS_FLYCNFG_VAL 0x00010001
#define CONFIG_SYS_SXCNFG_VAL 0x40044004
/*
* PCMCIA and CF Interfaces
*/
#define CONFIG_SYS_MECR_VAL 0x00000000
#define CONFIG_SYS_MCMEM0_VAL 0x00028307
#define CONFIG_SYS_MCMEM1_VAL 0x00014307
#define CONFIG_SYS_MCATT0_VAL 0x00038787
#define CONFIG_SYS_MCATT1_VAL 0x0001c787
#define CONFIG_SYS_MCIO0_VAL 0x0002830f
#define CONFIG_SYS_MCIO1_VAL 0x0001430f
#include "pxa-common.h"
#endif /* __CONFIG_H */