mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-27 23:21:01 +00:00
b2a6dfe4f8
We do not have to define CONFIG_MPC5xxx in board config headers (and start.S) because it is defined in arch/powerpc/cpu/mpc5xxx/config.mk. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
764 lines
18 KiB
ArmAsm
764 lines
18 KiB
ArmAsm
/*
|
|
* Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
|
|
* Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
|
|
* Copyright (C) 2000 - 2003 Wolfgang Denk <wd@denx.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/*
|
|
* U-Boot - Startup Code for MPC5xxx CPUs
|
|
*/
|
|
#include <asm-offsets.h>
|
|
#include <config.h>
|
|
#include <mpc5xxx.h>
|
|
#include <version.h>
|
|
|
|
#include <ppc_asm.tmpl>
|
|
#include <ppc_defs.h>
|
|
|
|
#include <asm/cache.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/u-boot.h>
|
|
|
|
/* We don't want the MMU yet.
|
|
*/
|
|
#undef MSR_KERNEL
|
|
/* Floating Point enable, Machine Check and Recoverable Interr. */
|
|
#ifdef DEBUG
|
|
#define MSR_KERNEL (MSR_FP|MSR_RI)
|
|
#else
|
|
#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
|
|
#endif
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
/*
|
|
* Set up GOT: Global Offset Table
|
|
*
|
|
* Use r12 to access the GOT
|
|
*/
|
|
START_GOT
|
|
GOT_ENTRY(_GOT2_TABLE_)
|
|
GOT_ENTRY(_FIXUP_TABLE_)
|
|
|
|
GOT_ENTRY(_start)
|
|
GOT_ENTRY(_start_of_vectors)
|
|
GOT_ENTRY(_end_of_vectors)
|
|
GOT_ENTRY(transfer_to_handler)
|
|
|
|
GOT_ENTRY(__init_end)
|
|
GOT_ENTRY(__bss_end)
|
|
GOT_ENTRY(__bss_start)
|
|
END_GOT
|
|
#endif
|
|
|
|
/*
|
|
* Version string
|
|
*/
|
|
.data
|
|
.globl version_string
|
|
version_string:
|
|
.ascii U_BOOT_VERSION_STRING, "\0"
|
|
|
|
/*
|
|
* Exception vectors
|
|
*/
|
|
.text
|
|
. = EXC_OFF_SYS_RESET
|
|
.globl _start
|
|
_start:
|
|
|
|
#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
|
|
/*
|
|
* This is the entry of the real U-Boot from a board port
|
|
* that supports SPL booting on the MPC5200. We only need
|
|
* to call board_init_f() here. Everything else has already
|
|
* been done in the SPL u-boot version.
|
|
*/
|
|
GET_GOT /* initialize GOT access */
|
|
bl board_init_f /* run 1st part of board init code (in Flash)*/
|
|
/* NOTREACHED - board_init_f() does not return */
|
|
#else
|
|
mfmsr r5 /* save msr contents */
|
|
|
|
/* Move CSBoot and adjust instruction pointer */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
#if defined(CONFIG_SYS_LOWBOOT)
|
|
# if defined(CONFIG_SYS_RAMBOOT)
|
|
# error CONFIG_SYS_LOWBOOT is incompatible with CONFIG_SYS_RAMBOOT
|
|
# endif /* CONFIG_SYS_RAMBOOT */
|
|
lis r4, CONFIG_SYS_DEFAULT_MBAR@h
|
|
lis r3, START_REG(CONFIG_SYS_BOOTCS_START)@h
|
|
ori r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l
|
|
stw r3, 0x4(r4) /* CS0 start */
|
|
lis r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@h
|
|
ori r3, r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@l
|
|
stw r3, 0x8(r4) /* CS0 stop */
|
|
lis r3, 0x02010000@h
|
|
ori r3, r3, 0x02010000@l
|
|
stw r3, 0x54(r4) /* CS0 and Boot enable */
|
|
|
|
lis r3, lowboot_reentry@h /* jump from bootlow address space (0x0000xxxx) */
|
|
ori r3, r3, lowboot_reentry@l /* to the address space the linker used */
|
|
mtlr r3
|
|
blr
|
|
|
|
lowboot_reentry:
|
|
lis r3, START_REG(CONFIG_SYS_BOOTCS_START)@h
|
|
ori r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l
|
|
stw r3, 0x4c(r4) /* Boot start */
|
|
lis r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@h
|
|
ori r3, r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@l
|
|
stw r3, 0x50(r4) /* Boot stop */
|
|
lis r3, 0x02000001@h
|
|
ori r3, r3, 0x02000001@l
|
|
stw r3, 0x54(r4) /* Boot enable, CS0 disable */
|
|
#endif /* CONFIG_SYS_LOWBOOT */
|
|
|
|
#if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT)
|
|
lis r3, CONFIG_SYS_MBAR@h
|
|
ori r3, r3, CONFIG_SYS_MBAR@l
|
|
/* MBAR is mirrored into the MBAR SPR */
|
|
mtspr MBAR,r3
|
|
rlwinm r3, r3, 16, 16, 31
|
|
lis r4, CONFIG_SYS_DEFAULT_MBAR@h
|
|
stw r3, 0(r4)
|
|
#endif /* CONFIG_SYS_DEFAULT_MBAR */
|
|
|
|
/* Initialise the MPC5xxx processor core */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
bl init_5xxx_core
|
|
|
|
/* initialize some things that are hard to access from C */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
/* set up stack in on-chip SRAM */
|
|
lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
|
|
ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
|
|
ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET
|
|
li r0, 0 /* Make room for stack frame header and */
|
|
stwu r0, -4(r1) /* clear final stack frame so that */
|
|
stwu r0, -4(r1) /* stack backtraces terminate cleanly */
|
|
|
|
/* let the C-code set up the rest */
|
|
/* */
|
|
/* Be careful to keep code relocatable ! */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
GET_GOT /* initialize GOT access */
|
|
#endif
|
|
|
|
/* r3: IMMR */
|
|
bl cpu_init_f /* run low-level CPU init code (in Flash)*/
|
|
|
|
bl board_init_f /* run 1st part of board init code (in Flash)*/
|
|
|
|
/* NOTREACHED - board_init_f() does not return */
|
|
#endif
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
/*
|
|
* Vector Table
|
|
*/
|
|
|
|
.globl _start_of_vectors
|
|
_start_of_vectors:
|
|
|
|
/* Machine check */
|
|
STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
|
|
|
|
/* Data Storage exception. */
|
|
STD_EXCEPTION(0x300, DataStorage, UnknownException)
|
|
|
|
/* Instruction Storage exception. */
|
|
STD_EXCEPTION(0x400, InstStorage, UnknownException)
|
|
|
|
/* External Interrupt exception. */
|
|
STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
|
|
|
|
/* Alignment exception. */
|
|
. = 0x600
|
|
Alignment:
|
|
EXCEPTION_PROLOG(SRR0, SRR1)
|
|
mfspr r4,DAR
|
|
stw r4,_DAR(r21)
|
|
mfspr r5,DSISR
|
|
stw r5,_DSISR(r21)
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
|
|
|
|
/* Program check exception */
|
|
. = 0x700
|
|
ProgramCheck:
|
|
EXCEPTION_PROLOG(SRR0, SRR1)
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
|
|
MSR_KERNEL, COPY_EE)
|
|
|
|
STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
|
|
|
|
/* I guess we could implement decrementer, and may have
|
|
* to someday for timekeeping.
|
|
*/
|
|
STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
|
|
|
|
STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
|
|
STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
|
|
STD_EXCEPTION(0xc00, SystemCall, UnknownException)
|
|
STD_EXCEPTION(0xd00, SingleStep, UnknownException)
|
|
|
|
STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
|
|
STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
|
|
|
|
STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
|
|
STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
|
|
STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
|
|
#ifdef DEBUG
|
|
. = 0x1300
|
|
/*
|
|
* This exception occurs when the program counter matches the
|
|
* Instruction Address Breakpoint Register (IABR).
|
|
*
|
|
* I want the cpu to halt if this occurs so I can hunt around
|
|
* with the debugger and look at things.
|
|
*
|
|
* When DEBUG is defined, both machine check enable (in the MSR)
|
|
* and checkstop reset enable (in the reset mode register) are
|
|
* turned off and so a checkstop condition will result in the cpu
|
|
* halting.
|
|
*
|
|
* I force the cpu into a checkstop condition by putting an illegal
|
|
* instruction here (at least this is the theory).
|
|
*
|
|
* well - that didnt work, so just do an infinite loop!
|
|
*/
|
|
1: b 1b
|
|
#else
|
|
STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
|
|
#endif
|
|
STD_EXCEPTION(0x1400, SMI, UnknownException)
|
|
|
|
STD_EXCEPTION(0x1500, Trap_15, UnknownException)
|
|
STD_EXCEPTION(0x1600, Trap_16, UnknownException)
|
|
STD_EXCEPTION(0x1700, Trap_17, UnknownException)
|
|
STD_EXCEPTION(0x1800, Trap_18, UnknownException)
|
|
STD_EXCEPTION(0x1900, Trap_19, UnknownException)
|
|
STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
|
|
STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
|
|
STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
|
|
STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
|
|
STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
|
|
STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
|
|
STD_EXCEPTION(0x2000, Trap_20, UnknownException)
|
|
STD_EXCEPTION(0x2100, Trap_21, UnknownException)
|
|
STD_EXCEPTION(0x2200, Trap_22, UnknownException)
|
|
STD_EXCEPTION(0x2300, Trap_23, UnknownException)
|
|
STD_EXCEPTION(0x2400, Trap_24, UnknownException)
|
|
STD_EXCEPTION(0x2500, Trap_25, UnknownException)
|
|
STD_EXCEPTION(0x2600, Trap_26, UnknownException)
|
|
STD_EXCEPTION(0x2700, Trap_27, UnknownException)
|
|
STD_EXCEPTION(0x2800, Trap_28, UnknownException)
|
|
STD_EXCEPTION(0x2900, Trap_29, UnknownException)
|
|
STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
|
|
STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
|
|
STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
|
|
STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
|
|
STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
|
|
STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
|
|
|
|
|
|
.globl _end_of_vectors
|
|
_end_of_vectors:
|
|
|
|
. = 0x3000
|
|
|
|
/*
|
|
* This code finishes saving the registers to the exception frame
|
|
* and jumps to the appropriate handler for the exception.
|
|
* Register r21 is pointer into trap frame, r1 has new stack pointer.
|
|
*/
|
|
.globl transfer_to_handler
|
|
transfer_to_handler:
|
|
stw r22,_NIP(r21)
|
|
lis r22,MSR_POW@h
|
|
andc r23,r23,r22
|
|
stw r23,_MSR(r21)
|
|
SAVE_GPR(7, r21)
|
|
SAVE_4GPRS(8, r21)
|
|
SAVE_8GPRS(12, r21)
|
|
SAVE_8GPRS(24, r21)
|
|
mflr r23
|
|
andi. r24,r23,0x3f00 /* get vector offset */
|
|
stw r24,TRAP(r21)
|
|
li r22,0
|
|
stw r22,RESULT(r21)
|
|
lwz r24,0(r23) /* virtual address of handler */
|
|
lwz r23,4(r23) /* where to go when done */
|
|
mtspr SRR0,r24
|
|
mtspr SRR1,r20
|
|
mtlr r23
|
|
SYNC
|
|
rfi /* jump to handler, enable MMU */
|
|
|
|
int_return:
|
|
mfmsr r28 /* Disable interrupts */
|
|
li r4,0
|
|
ori r4,r4,MSR_EE
|
|
andc r28,r28,r4
|
|
SYNC /* Some chip revs need this... */
|
|
mtmsr r28
|
|
SYNC
|
|
lwz r2,_CTR(r1)
|
|
lwz r0,_LINK(r1)
|
|
mtctr r2
|
|
mtlr r0
|
|
lwz r2,_XER(r1)
|
|
lwz r0,_CCR(r1)
|
|
mtspr XER,r2
|
|
mtcrf 0xFF,r0
|
|
REST_10GPRS(3, r1)
|
|
REST_10GPRS(13, r1)
|
|
REST_8GPRS(23, r1)
|
|
REST_GPR(31, r1)
|
|
lwz r2,_NIP(r1) /* Restore environment */
|
|
lwz r0,_MSR(r1)
|
|
mtspr SRR0,r2
|
|
mtspr SRR1,r0
|
|
lwz r0,GPR0(r1)
|
|
lwz r2,GPR2(r1)
|
|
lwz r1,GPR1(r1)
|
|
SYNC
|
|
rfi
|
|
#endif /* CONFIG_SPL_BUILD */
|
|
|
|
/*
|
|
* This code initialises the MPC5xxx processor core
|
|
* (conforms to PowerPC 603e spec)
|
|
* Note: expects original MSR contents to be in r5.
|
|
*/
|
|
|
|
.globl init_5xx_core
|
|
init_5xxx_core:
|
|
|
|
/* Initialize machine status; enable machine check interrupt */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
li r3, MSR_KERNEL /* Set ME and RI flags */
|
|
rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */
|
|
#ifdef DEBUG
|
|
rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */
|
|
#endif
|
|
SYNC /* Some chip revs need this... */
|
|
mtmsr r3
|
|
SYNC
|
|
mtspr SRR1, r3 /* Make SRR1 match MSR */
|
|
|
|
/* Initialize the Hardware Implementation-dependent Registers */
|
|
/* HID0 also contains cache control */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
lis r3, CONFIG_SYS_HID0_INIT@h
|
|
ori r3, r3, CONFIG_SYS_HID0_INIT@l
|
|
SYNC
|
|
mtspr HID0, r3
|
|
|
|
lis r3, CONFIG_SYS_HID0_FINAL@h
|
|
ori r3, r3, CONFIG_SYS_HID0_FINAL@l
|
|
SYNC
|
|
mtspr HID0, r3
|
|
|
|
/* clear all BAT's */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
li r0, 0
|
|
mtspr DBAT0U, r0
|
|
mtspr DBAT0L, r0
|
|
mtspr DBAT1U, r0
|
|
mtspr DBAT1L, r0
|
|
mtspr DBAT2U, r0
|
|
mtspr DBAT2L, r0
|
|
mtspr DBAT3U, r0
|
|
mtspr DBAT3L, r0
|
|
mtspr DBAT4U, r0
|
|
mtspr DBAT4L, r0
|
|
mtspr DBAT5U, r0
|
|
mtspr DBAT5L, r0
|
|
mtspr DBAT6U, r0
|
|
mtspr DBAT6L, r0
|
|
mtspr DBAT7U, r0
|
|
mtspr DBAT7L, r0
|
|
mtspr IBAT0U, r0
|
|
mtspr IBAT0L, r0
|
|
mtspr IBAT1U, r0
|
|
mtspr IBAT1L, r0
|
|
mtspr IBAT2U, r0
|
|
mtspr IBAT2L, r0
|
|
mtspr IBAT3U, r0
|
|
mtspr IBAT3L, r0
|
|
mtspr IBAT4U, r0
|
|
mtspr IBAT4L, r0
|
|
mtspr IBAT5U, r0
|
|
mtspr IBAT5L, r0
|
|
mtspr IBAT6U, r0
|
|
mtspr IBAT6L, r0
|
|
mtspr IBAT7U, r0
|
|
mtspr IBAT7L, r0
|
|
SYNC
|
|
|
|
/* invalidate all tlb's */
|
|
/* */
|
|
/* From the 603e User Manual: "The 603e provides the ability to */
|
|
/* invalidate a TLB entry. The TLB Invalidate Entry (tlbie) */
|
|
/* instruction invalidates the TLB entry indexed by the EA, and */
|
|
/* operates on both the instruction and data TLBs simultaneously*/
|
|
/* invalidating four TLB entries (both sets in each TLB). The */
|
|
/* index corresponds to bits 15-19 of the EA. To invalidate all */
|
|
/* entries within both TLBs, 32 tlbie instructions should be */
|
|
/* issued, incrementing this field by one each time." */
|
|
/* */
|
|
/* "Note that the tlbia instruction is not implemented on the */
|
|
/* 603e." */
|
|
/* */
|
|
/* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000 */
|
|
/* incrementing by 0x1000 each time. The code below is sort of */
|
|
/* based on code in "flush_tlbs" from arch/powerpc/kernel/head.S */
|
|
/* */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
li r3, 32
|
|
mtctr r3
|
|
li r3, 0
|
|
1: tlbie r3
|
|
addi r3, r3, 0x1000
|
|
bdnz 1b
|
|
SYNC
|
|
|
|
/* Done! */
|
|
/*--------------------------------------------------------------*/
|
|
|
|
blr
|
|
|
|
/* Cache functions.
|
|
*
|
|
* Note: requires that all cache bits in
|
|
* HID0 are in the low half word.
|
|
*/
|
|
.globl icache_enable
|
|
icache_enable:
|
|
mfspr r3, HID0
|
|
ori r3, r3, HID0_ICE
|
|
lis r4, 0
|
|
ori r4, r4, HID0_ILOCK
|
|
andc r3, r3, r4
|
|
ori r4, r3, HID0_ICFI
|
|
isync
|
|
mtspr HID0, r4 /* sets enable and invalidate, clears lock */
|
|
isync
|
|
mtspr HID0, r3 /* clears invalidate */
|
|
blr
|
|
|
|
.globl icache_disable
|
|
icache_disable:
|
|
mfspr r3, HID0
|
|
lis r4, 0
|
|
ori r4, r4, HID0_ICE|HID0_ILOCK
|
|
andc r3, r3, r4
|
|
ori r4, r3, HID0_ICFI
|
|
isync
|
|
mtspr HID0, r4 /* sets invalidate, clears enable and lock */
|
|
isync
|
|
mtspr HID0, r3 /* clears invalidate */
|
|
blr
|
|
|
|
.globl icache_status
|
|
icache_status:
|
|
mfspr r3, HID0
|
|
rlwinm r3, r3, HID0_ICE_BITPOS + 1, 31, 31
|
|
blr
|
|
|
|
.globl dcache_enable
|
|
dcache_enable:
|
|
mfspr r3, HID0
|
|
ori r3, r3, HID0_DCE
|
|
lis r4, 0
|
|
ori r4, r4, HID0_DLOCK
|
|
andc r3, r3, r4
|
|
ori r4, r3, HID0_DCI
|
|
sync
|
|
mtspr HID0, r4 /* sets enable and invalidate, clears lock */
|
|
sync
|
|
mtspr HID0, r3 /* clears invalidate */
|
|
blr
|
|
|
|
.globl dcache_disable
|
|
dcache_disable:
|
|
mfspr r3, HID0
|
|
lis r4, 0
|
|
ori r4, r4, HID0_DCE|HID0_DLOCK
|
|
andc r3, r3, r4
|
|
ori r4, r3, HID0_DCI
|
|
sync
|
|
mtspr HID0, r4 /* sets invalidate, clears enable and lock */
|
|
sync
|
|
mtspr HID0, r3 /* clears invalidate */
|
|
blr
|
|
|
|
.globl dcache_status
|
|
dcache_status:
|
|
mfspr r3, HID0
|
|
rlwinm r3, r3, HID0_DCE_BITPOS + 1, 31, 31
|
|
blr
|
|
|
|
.globl get_svr
|
|
get_svr:
|
|
mfspr r3, SVR
|
|
blr
|
|
|
|
.globl get_pvr
|
|
get_pvr:
|
|
mfspr r3, PVR
|
|
blr
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
/*------------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* void relocate_code (addr_sp, gd, addr_moni)
|
|
*
|
|
* This "function" does not return, instead it continues in RAM
|
|
* after relocating the monitor code.
|
|
*
|
|
* r3 = dest
|
|
* r4 = src
|
|
* r5 = length in bytes
|
|
* r6 = cachelinesize
|
|
*/
|
|
.globl relocate_code
|
|
relocate_code:
|
|
mr r1, r3 /* Set new stack pointer */
|
|
mr r9, r4 /* Save copy of Global Data pointer */
|
|
mr r10, r5 /* Save copy of Destination Address */
|
|
|
|
GET_GOT
|
|
mr r3, r5 /* Destination Address */
|
|
lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
|
|
ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
|
|
lwz r5, GOT(__init_end)
|
|
sub r5, r5, r4
|
|
li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
|
|
|
|
/*
|
|
* Fix GOT pointer:
|
|
*
|
|
* New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
|
|
*
|
|
* Offset:
|
|
*/
|
|
sub r15, r10, r4
|
|
|
|
/* First our own GOT */
|
|
add r12, r12, r15
|
|
/* then the one used by the C code */
|
|
add r30, r30, r15
|
|
|
|
/*
|
|
* Now relocate code
|
|
*/
|
|
|
|
cmplw cr1,r3,r4
|
|
addi r0,r5,3
|
|
srwi. r0,r0,2
|
|
beq cr1,4f /* In place copy is not necessary */
|
|
beq 7f /* Protect against 0 count */
|
|
mtctr r0
|
|
bge cr1,2f
|
|
|
|
la r8,-4(r4)
|
|
la r7,-4(r3)
|
|
1: lwzu r0,4(r8)
|
|
stwu r0,4(r7)
|
|
bdnz 1b
|
|
b 4f
|
|
|
|
2: slwi r0,r0,2
|
|
add r8,r4,r0
|
|
add r7,r3,r0
|
|
3: lwzu r0,-4(r8)
|
|
stwu r0,-4(r7)
|
|
bdnz 3b
|
|
|
|
/*
|
|
* Now flush the cache: note that we must start from a cache aligned
|
|
* address. Otherwise we might miss one cache line.
|
|
*/
|
|
4: cmpwi r6,0
|
|
add r5,r3,r5
|
|
beq 7f /* Always flush prefetch queue in any case */
|
|
subi r0,r6,1
|
|
andc r3,r3,r0
|
|
mfspr r7,HID0 /* don't do dcbst if dcache is disabled */
|
|
rlwinm r7,r7,HID0_DCE_BITPOS+1,31,31
|
|
cmpwi r7,0
|
|
beq 9f
|
|
mr r4,r3
|
|
5: dcbst 0,r4
|
|
add r4,r4,r6
|
|
cmplw r4,r5
|
|
blt 5b
|
|
sync /* Wait for all dcbst to complete on bus */
|
|
9: mfspr r7,HID0 /* don't do icbi if icache is disabled */
|
|
rlwinm r7,r7,HID0_ICE_BITPOS+1,31,31
|
|
cmpwi r7,0
|
|
beq 7f
|
|
mr r4,r3
|
|
6: icbi 0,r4
|
|
add r4,r4,r6
|
|
cmplw r4,r5
|
|
blt 6b
|
|
7: sync /* Wait for all icbi to complete on bus */
|
|
isync
|
|
|
|
/*
|
|
* We are done. Do not return, instead branch to second part of board
|
|
* initialization, now running from RAM.
|
|
*/
|
|
|
|
addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
|
|
mtlr r0
|
|
blr
|
|
|
|
in_ram:
|
|
|
|
/*
|
|
* Relocation Function, r12 point to got2+0x8000
|
|
*
|
|
* Adjust got2 pointers, no need to check for 0, this code
|
|
* already puts a few entries in the table.
|
|
*/
|
|
li r0,__got2_entries@sectoff@l
|
|
la r3,GOT(_GOT2_TABLE_)
|
|
lwz r11,GOT(_GOT2_TABLE_)
|
|
mtctr r0
|
|
sub r11,r3,r11
|
|
addi r3,r3,-4
|
|
1: lwzu r0,4(r3)
|
|
cmpwi r0,0
|
|
beq- 2f
|
|
add r0,r0,r11
|
|
stw r0,0(r3)
|
|
2: bdnz 1b
|
|
|
|
/*
|
|
* Now adjust the fixups and the pointers to the fixups
|
|
* in case we need to move ourselves again.
|
|
*/
|
|
li r0,__fixup_entries@sectoff@l
|
|
lwz r3,GOT(_FIXUP_TABLE_)
|
|
cmpwi r0,0
|
|
mtctr r0
|
|
addi r3,r3,-4
|
|
beq 4f
|
|
3: lwzu r4,4(r3)
|
|
lwzux r0,r4,r11
|
|
cmpwi r0,0
|
|
add r0,r0,r11
|
|
stw r4,0(r3)
|
|
beq- 5f
|
|
stw r0,0(r4)
|
|
5: bdnz 3b
|
|
4:
|
|
clear_bss:
|
|
/*
|
|
* Now clear BSS segment
|
|
*/
|
|
lwz r3,GOT(__bss_start)
|
|
lwz r4,GOT(__bss_end)
|
|
|
|
cmplw 0, r3, r4
|
|
beq 6f
|
|
|
|
li r0, 0
|
|
5:
|
|
stw r0, 0(r3)
|
|
addi r3, r3, 4
|
|
cmplw 0, r3, r4
|
|
bne 5b
|
|
6:
|
|
|
|
mr r3, r9 /* Global Data pointer */
|
|
mr r4, r10 /* Destination Address */
|
|
bl board_init_r
|
|
|
|
/*
|
|
* Copy exception vector code to low memory
|
|
*
|
|
* r3: dest_addr
|
|
* r7: source address, r8: end address, r9: target address
|
|
*/
|
|
.globl trap_init
|
|
trap_init:
|
|
mflr r4 /* save link register */
|
|
GET_GOT
|
|
lwz r7, GOT(_start)
|
|
lwz r8, GOT(_end_of_vectors)
|
|
|
|
li r9, 0x100 /* reset vector always at 0x100 */
|
|
|
|
cmplw 0, r7, r8
|
|
bgelr /* return if r7>=r8 - just in case */
|
|
1:
|
|
lwz r0, 0(r7)
|
|
stw r0, 0(r9)
|
|
addi r7, r7, 4
|
|
addi r9, r9, 4
|
|
cmplw 0, r7, r8
|
|
bne 1b
|
|
|
|
/*
|
|
* relocate `hdlr' and `int_return' entries
|
|
*/
|
|
li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
|
|
li r8, Alignment - _start + EXC_OFF_SYS_RESET
|
|
2:
|
|
bl trap_reloc
|
|
addi r7, r7, 0x100 /* next exception vector */
|
|
cmplw 0, r7, r8
|
|
blt 2b
|
|
|
|
li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
|
|
bl trap_reloc
|
|
|
|
li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
|
|
bl trap_reloc
|
|
|
|
li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
|
|
li r8, SystemCall - _start + EXC_OFF_SYS_RESET
|
|
3:
|
|
bl trap_reloc
|
|
addi r7, r7, 0x100 /* next exception vector */
|
|
cmplw 0, r7, r8
|
|
blt 3b
|
|
|
|
li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
|
|
li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
|
|
4:
|
|
bl trap_reloc
|
|
addi r7, r7, 0x100 /* next exception vector */
|
|
cmplw 0, r7, r8
|
|
blt 4b
|
|
|
|
mfmsr r3 /* now that the vectors have */
|
|
lis r7, MSR_IP@h /* relocated into low memory */
|
|
ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
|
|
andc r3, r3, r7 /* (if it was on) */
|
|
SYNC /* Some chip revs need this... */
|
|
mtmsr r3
|
|
SYNC
|
|
|
|
mtlr r4 /* restore link register */
|
|
blr
|
|
|
|
#endif /* CONFIG_SPL_BUILD */
|