u-boot/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c
Walter Lozano e3e2470fdd drivers: rename drivers to match compatible string
When using OF_PLATDATA, the bind process between devices and drivers
is performed trying to match compatible string with driver names.
However driver names are not strictly defined, and also there are different
names used when declaring a driver with U_BOOT_DRIVER, the name of the
symbol used in the linker list and the used in the struct driver_info.

In order to make things a bit more clear, rename the drivers names. This
will also help for further OF_PLATDATA improvements, such as checking
for valid driver names.

Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add a fix for sandbox of-platdata to avoid using an invalid ANSI colour:
Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-09 18:57:22 -06:00

184 lines
5.2 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2007-2008
* Stelian Pop <stelian@popies.net>
* Lead Tech Design <www.leadtechdesign.com>
*/
#include <common.h>
#include <dm.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
#include <asm/io.h>
/*
* if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
* peripheral pins. Good to have if hardware is soldered optionally
* or in case of SPI no slave is selected. Avoid lines to float
* needlessly. Use a short local PUP define.
*
* Due to errata "TXD floats when CTS is inactive" pullups are always
* on for TXD pins.
*/
#ifdef CONFIG_AT91_GPIO_PULLUP
# define PUP CONFIG_AT91_GPIO_PULLUP
#else
# define PUP 0
#endif
void at91_serial0_hw_init(void)
{
at91_set_a_periph(AT91_PIO_PORTB, 19, 1); /* TXD0 */
at91_set_a_periph(AT91_PIO_PORTB, 18, PUP); /* RXD0 */
at91_periph_clk_enable(ATMEL_ID_USART0);
}
void at91_serial1_hw_init(void)
{
at91_set_a_periph(AT91_PIO_PORTB, 4, 1); /* TXD1 */
at91_set_a_periph(AT91_PIO_PORTB, 5, PUP); /* RXD1 */
at91_periph_clk_enable(ATMEL_ID_USART1);
}
void at91_serial2_hw_init(void)
{
at91_set_a_periph(AT91_PIO_PORTD, 6, 1); /* TXD2 */
at91_set_a_periph(AT91_PIO_PORTD, 7, PUP); /* RXD2 */
at91_periph_clk_enable(ATMEL_ID_USART2);
}
void at91_seriald_hw_init(void)
{
at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* DRXD */
at91_set_a_periph(AT91_PIO_PORTB, 13, 1); /* DTXD */
at91_periph_clk_enable(ATMEL_ID_SYS);
}
#ifdef CONFIG_ATMEL_SPI
void at91_spi0_hw_init(unsigned long cs_mask)
{
at91_set_a_periph(AT91_PIO_PORTB, 0, PUP); /* SPI0_MISO */
at91_set_a_periph(AT91_PIO_PORTB, 1, PUP); /* SPI0_MOSI */
at91_set_a_periph(AT91_PIO_PORTB, 2, PUP); /* SPI0_SPCK */
at91_periph_clk_enable(ATMEL_ID_SPI0);
if (cs_mask & (1 << 0)) {
at91_set_a_periph(AT91_PIO_PORTB, 3, 1);
}
if (cs_mask & (1 << 1)) {
at91_set_b_periph(AT91_PIO_PORTB, 18, 1);
}
if (cs_mask & (1 << 2)) {
at91_set_b_periph(AT91_PIO_PORTB, 19, 1);
}
if (cs_mask & (1 << 3)) {
at91_set_b_periph(AT91_PIO_PORTD, 27, 1);
}
if (cs_mask & (1 << 4)) {
at91_set_pio_output(AT91_PIO_PORTB, 3, 1);
}
if (cs_mask & (1 << 5)) {
at91_set_pio_output(AT91_PIO_PORTB, 18, 1);
}
if (cs_mask & (1 << 6)) {
at91_set_pio_output(AT91_PIO_PORTB, 19, 1);
}
if (cs_mask & (1 << 7)) {
at91_set_pio_output(AT91_PIO_PORTD, 27, 1);
}
}
void at91_spi1_hw_init(unsigned long cs_mask)
{
at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* SPI1_MISO */
at91_set_a_periph(AT91_PIO_PORTB, 15, PUP); /* SPI1_MOSI */
at91_set_a_periph(AT91_PIO_PORTB, 16, PUP); /* SPI1_SPCK */
at91_periph_clk_enable(ATMEL_ID_SPI1);
if (cs_mask & (1 << 0)) {
at91_set_a_periph(AT91_PIO_PORTB, 17, 1);
}
if (cs_mask & (1 << 1)) {
at91_set_b_periph(AT91_PIO_PORTD, 28, 1);
}
if (cs_mask & (1 << 2)) {
at91_set_a_periph(AT91_PIO_PORTD, 18, 1);
}
if (cs_mask & (1 << 3)) {
at91_set_a_periph(AT91_PIO_PORTD, 19, 1);
}
if (cs_mask & (1 << 4)) {
at91_set_pio_output(AT91_PIO_PORTB, 17, 1);
}
if (cs_mask & (1 << 5)) {
at91_set_pio_output(AT91_PIO_PORTD, 28, 1);
}
if (cs_mask & (1 << 6)) {
at91_set_pio_output(AT91_PIO_PORTD, 18, 1);
}
if (cs_mask & (1 << 7)) {
at91_set_pio_output(AT91_PIO_PORTD, 19, 1);
}
}
#endif
#ifdef CONFIG_MACB
void at91_macb_hw_init(void)
{
at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* ETXCK_EREFCK */
at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* ERXDV */
at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* ERX0 */
at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* ERX1 */
at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* ERXER */
at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* ETXEN */
at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* ETX0 */
at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* ETX1 */
at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* EMDIO */
at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* EMDC */
#ifndef CONFIG_RMII
at91_set_b_periph(AT91_PIO_PORTA, 29, 0); /* ECRS */
at91_set_b_periph(AT91_PIO_PORTA, 30, 0); /* ECOL */
at91_set_b_periph(AT91_PIO_PORTA, 8, 0); /* ERX2 */
at91_set_b_periph(AT91_PIO_PORTA, 9, 0); /* ERX3 */
at91_set_b_periph(AT91_PIO_PORTA, 28, 0); /* ERXCK */
at91_set_b_periph(AT91_PIO_PORTA, 6, 0); /* ETX2 */
at91_set_b_periph(AT91_PIO_PORTA, 7, 0); /* ETX3 */
at91_set_b_periph(AT91_PIO_PORTA, 27, 0); /* ETXER */
#endif
}
#endif
#ifdef CONFIG_GENERIC_ATMEL_MCI
void at91_mci_hw_init(void)
{
at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* MCI0 CLK */
at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* MCI0 CDA */
at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* MCI0 DA0 */
at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* MCI0 DA1 */
at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* MCI0 DA2 */
at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* MCI0 DA3 */
at91_periph_clk_enable(ATMEL_ID_MCI0);
}
#endif
/* Platform data for the GPIOs */
static const struct at91_port_platdata at91sam9260_plat[] = {
{ ATMEL_BASE_PIOA, "PA" },
{ ATMEL_BASE_PIOB, "PB" },
{ ATMEL_BASE_PIOC, "PC" },
{ ATMEL_BASE_PIOD, "PD" },
{ ATMEL_BASE_PIOE, "PE" },
};
U_BOOT_DEVICES(at91sam9260_gpios) = {
{ "atmel_at91rm9200_gpio", &at91sam9260_plat[0] },
{ "atmel_at91rm9200_gpio", &at91sam9260_plat[1] },
{ "atmel_at91rm9200_gpio", &at91sam9260_plat[2] },
{ "atmel_at91rm9200_gpio", &at91sam9260_plat[3] },
{ "atmel_at91rm9200_gpio", &at91sam9260_plat[4] },
};