u-boot/include/configs/rk3288_common.h
Patrick Delaunay 14453fbfad Convert CONFIG_SF_DEFAULT_* to Kconfig
This converts the following to Kconfig:
  CONFIG_SF_DEFAULT_BUS
  CONFIG_SF_DEFAULT_CS
  CONFIG_SF_DEFAULT_MODE
  CONFIG_SF_DEFAULT_SPEED

I use moveconfig script and then manual check on generated u-boot.cfg
to solve the remaining issue.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-03-25 17:36:53 -04:00

73 lines
1.9 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2015 Google, Inc
*/
#ifndef __CONFIG_RK3288_COMMON_H
#define __CONFIG_RK3288_COMMON_H
#include <asm/arch/hardware.h>
#include "rockchip-common.h"
#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
#define CONFIG_SYS_MALLOC_LEN (32 << 20)
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_TIMER_RATE (24 * 1000 * 1000)
#define CONFIG_SYS_TIMER_BASE 0xff810020 /* TIMER7 */
#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8)
#ifdef CONFIG_SPL_ROCKCHIP_BACK_TO_BROM
/* Bootrom will load u-boot binary to 0x0 once return from SPL */
#endif
#define CONFIG_SYS_INIT_SP_ADDR 0x00100000
#define CONFIG_SYS_LOAD_ADDR 0x00800800
#define CONFIG_SPL_STACK 0xff718000
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT)
# define CONFIG_SPL_TEXT_BASE 0x0
#else
# define CONFIG_SPL_TEXT_BASE 0xff704000
#endif
/* RAW SD card / eMMC locations. */
#define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
/* FAT sd card locations. */
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SYS_SDRAM_BASE 0
#define SDRAM_BANK_SIZE (2UL << 30)
#define SDRAM_MAX_SIZE 0xfe000000
#ifndef CONFIG_SPL_BUILD
/* usb otg */
/* usb mass storage */
#define CONFIG_CMD_USB_MASS_STORAGE
/* usb host support */
#define ENV_MEM_LAYOUT_SETTINGS \
"scriptaddr=0x00000000\0" \
"pxefile_addr_r=0x00100000\0" \
"fdt_addr_r=0x01f00000\0" \
"kernel_addr_r=0x02000000\0" \
"ramdisk_addr_r=0x04000000\0"
#include <config_distro_bootcmd.h>
/* Linux fails to load the fdt if it's loaded above 256M on a Rock 2 board, so
* limit the fdt reallocation to that */
#define CONFIG_EXTRA_ENV_SETTINGS \
"fdt_high=0x0fffffff\0" \
"initrd_high=0x0fffffff\0" \
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
"partitions=" PARTS_DEFAULT \
ENV_MEM_LAYOUT_SETTINGS \
ROCKCHIP_DEVICE_SETTINGS \
BOOTENV
#endif
#define CONFIG_PREBOOT
#endif