mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
dcfc42b12f
Convert some of these occurences to C code, where it is easy to do. This should help encourage this approach to be used in new code. Signed-off-by: Simon Glass <sjg@chromium.org>
625 lines
16 KiB
C
625 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* (C) Copyright 2015 Google, Inc
|
|
* (C) Copyright 2016 Heiko Stuebner <heiko@sntech.de>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk-uclass.h>
|
|
#include <dm.h>
|
|
#include <dt-structs.h>
|
|
#include <errno.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <mapmem.h>
|
|
#include <syscon.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch-rockchip/clock.h>
|
|
#include <asm/arch-rockchip/cru_rk3188.h>
|
|
#include <asm/arch-rockchip/grf_rk3188.h>
|
|
#include <asm/arch-rockchip/hardware.h>
|
|
#include <dt-bindings/clock/rk3188-cru.h>
|
|
#include <dm/device-internal.h>
|
|
#include <dm/lists.h>
|
|
#include <dm/uclass-internal.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/stringify.h>
|
|
|
|
enum rk3188_clk_type {
|
|
RK3188_CRU,
|
|
RK3188A_CRU,
|
|
};
|
|
|
|
struct rk3188_clk_plat {
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct dtd_rockchip_rk3188_cru dtd;
|
|
#endif
|
|
};
|
|
|
|
struct pll_div {
|
|
u32 nr;
|
|
u32 nf;
|
|
u32 no;
|
|
};
|
|
|
|
enum {
|
|
VCO_MAX_HZ = 2200U * 1000000,
|
|
VCO_MIN_HZ = 440 * 1000000,
|
|
OUTPUT_MAX_HZ = 2200U * 1000000,
|
|
OUTPUT_MIN_HZ = 30 * 1000000,
|
|
FREF_MAX_HZ = 2200U * 1000000,
|
|
FREF_MIN_HZ = 30 * 1000,
|
|
};
|
|
|
|
enum {
|
|
/* PLL CON0 */
|
|
PLL_OD_MASK = 0x0f,
|
|
|
|
/* PLL CON1 */
|
|
PLL_NF_MASK = 0x1fff,
|
|
|
|
/* PLL CON2 */
|
|
PLL_BWADJ_MASK = 0x0fff,
|
|
|
|
/* PLL CON3 */
|
|
PLL_RESET_SHIFT = 5,
|
|
|
|
/* GRF_SOC_STATUS0 */
|
|
SOCSTS_DPLL_LOCK = 1 << 5,
|
|
SOCSTS_APLL_LOCK = 1 << 6,
|
|
SOCSTS_CPLL_LOCK = 1 << 7,
|
|
SOCSTS_GPLL_LOCK = 1 << 8,
|
|
};
|
|
|
|
#define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1))
|
|
|
|
#define PLL_DIVISORS(hz, _nr, _no) {\
|
|
.nr = _nr, .nf = (u32)((u64)hz * _nr * _no / OSC_HZ), .no = _no};\
|
|
_Static_assert(((u64)hz * _nr * _no / OSC_HZ) * OSC_HZ /\
|
|
(_nr * _no) == hz, #hz "Hz cannot be hit with PLL "\
|
|
"divisors on line " __stringify(__LINE__));
|
|
|
|
/* Keep divisors as low as possible to reduce jitter and power usage */
|
|
#ifdef CONFIG_SPL_BUILD
|
|
static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2);
|
|
static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2);
|
|
#endif
|
|
|
|
static int rkclk_set_pll(struct rk3188_cru *cru, enum rk_clk_id clk_id,
|
|
const struct pll_div *div, bool has_bwadj)
|
|
{
|
|
int pll_id = rk_pll_id(clk_id);
|
|
struct rk3188_pll *pll = &cru->pll[pll_id];
|
|
/* All PLLs have same VCO and output frequency range restrictions. */
|
|
uint vco_hz = OSC_HZ / 1000 * div->nf / div->nr * 1000;
|
|
uint output_hz = vco_hz / div->no;
|
|
|
|
debug("PLL at %x: nf=%d, nr=%d, no=%d, vco=%u Hz, output=%u Hz\n",
|
|
(uint)pll, div->nf, div->nr, div->no, vco_hz, output_hz);
|
|
assert(vco_hz >= VCO_MIN_HZ && vco_hz <= VCO_MAX_HZ &&
|
|
output_hz >= OUTPUT_MIN_HZ && output_hz <= OUTPUT_MAX_HZ &&
|
|
(div->no == 1 || !(div->no % 2)));
|
|
|
|
/* enter reset */
|
|
rk_setreg(&pll->con3, 1 << PLL_RESET_SHIFT);
|
|
|
|
rk_clrsetreg(&pll->con0,
|
|
CLKR_MASK << CLKR_SHIFT | PLL_OD_MASK,
|
|
((div->nr - 1) << CLKR_SHIFT) | (div->no - 1));
|
|
rk_clrsetreg(&pll->con1, CLKF_MASK, div->nf - 1);
|
|
|
|
if (has_bwadj)
|
|
rk_clrsetreg(&pll->con2, PLL_BWADJ_MASK, (div->nf >> 1) - 1);
|
|
|
|
udelay(10);
|
|
|
|
/* return from reset */
|
|
rk_clrreg(&pll->con3, 1 << PLL_RESET_SHIFT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rkclk_configure_ddr(struct rk3188_cru *cru, struct rk3188_grf *grf,
|
|
unsigned int hz, bool has_bwadj)
|
|
{
|
|
static const struct pll_div dpll_cfg[] = {
|
|
{.nf = 75, .nr = 1, .no = 6},
|
|
{.nf = 400, .nr = 9, .no = 2},
|
|
{.nf = 500, .nr = 9, .no = 2},
|
|
{.nf = 100, .nr = 3, .no = 1},
|
|
};
|
|
int cfg;
|
|
|
|
switch (hz) {
|
|
case 300000000:
|
|
cfg = 0;
|
|
break;
|
|
case 533000000: /* actually 533.3P MHz */
|
|
cfg = 1;
|
|
break;
|
|
case 666000000: /* actually 666.6P MHz */
|
|
cfg = 2;
|
|
break;
|
|
case 800000000:
|
|
cfg = 3;
|
|
break;
|
|
default:
|
|
debug("Unsupported SDRAM frequency");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* pll enter slow-mode */
|
|
rk_clrsetreg(&cru->cru_mode_con, DPLL_MODE_MASK << DPLL_MODE_SHIFT,
|
|
DPLL_MODE_SLOW << DPLL_MODE_SHIFT);
|
|
|
|
rkclk_set_pll(cru, CLK_DDR, &dpll_cfg[cfg], has_bwadj);
|
|
|
|
/* wait for pll lock */
|
|
while (!(readl(&grf->soc_status0) & SOCSTS_DPLL_LOCK))
|
|
udelay(1);
|
|
|
|
/* PLL enter normal-mode */
|
|
rk_clrsetreg(&cru->cru_mode_con, DPLL_MODE_MASK << DPLL_MODE_SHIFT,
|
|
DPLL_MODE_NORMAL << DPLL_MODE_SHIFT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rkclk_configure_cpu(struct rk3188_cru *cru, struct rk3188_grf *grf,
|
|
unsigned int hz, bool has_bwadj)
|
|
{
|
|
static const struct pll_div apll_cfg[] = {
|
|
{.nf = 50, .nr = 1, .no = 2},
|
|
{.nf = 67, .nr = 1, .no = 1},
|
|
};
|
|
int div_core_peri, div_aclk_core, cfg;
|
|
|
|
/*
|
|
* We support two possible frequencies, the safe 600MHz
|
|
* which will work with default pmic settings and will
|
|
* be set in SPL to get away from the 24MHz default and
|
|
* the maximum of 1.6Ghz, which boards can set if they
|
|
* were able to get pmic support for it.
|
|
*/
|
|
switch (hz) {
|
|
case APLL_SAFE_HZ:
|
|
cfg = 0;
|
|
div_core_peri = 1;
|
|
div_aclk_core = 3;
|
|
break;
|
|
case APLL_HZ:
|
|
cfg = 1;
|
|
div_core_peri = 2;
|
|
div_aclk_core = 3;
|
|
break;
|
|
default:
|
|
debug("Unsupported ARMCLK frequency");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* pll enter slow-mode */
|
|
rk_clrsetreg(&cru->cru_mode_con, APLL_MODE_MASK << APLL_MODE_SHIFT,
|
|
APLL_MODE_SLOW << APLL_MODE_SHIFT);
|
|
|
|
rkclk_set_pll(cru, CLK_ARM, &apll_cfg[cfg], has_bwadj);
|
|
|
|
/* waiting for pll lock */
|
|
while (!(readl(&grf->soc_status0) & SOCSTS_APLL_LOCK))
|
|
udelay(1);
|
|
|
|
/* Set divider for peripherals attached to the cpu core. */
|
|
rk_clrsetreg(&cru->cru_clksel_con[0],
|
|
CORE_PERI_DIV_MASK << CORE_PERI_DIV_SHIFT,
|
|
div_core_peri << CORE_PERI_DIV_SHIFT);
|
|
|
|
/* set up dependent divisor for aclk_core */
|
|
rk_clrsetreg(&cru->cru_clksel_con[1],
|
|
CORE_ACLK_DIV_MASK << CORE_ACLK_DIV_SHIFT,
|
|
div_aclk_core << CORE_ACLK_DIV_SHIFT);
|
|
|
|
/* PLL enter normal-mode */
|
|
rk_clrsetreg(&cru->cru_mode_con, APLL_MODE_MASK << APLL_MODE_SHIFT,
|
|
APLL_MODE_NORMAL << APLL_MODE_SHIFT);
|
|
|
|
return hz;
|
|
}
|
|
|
|
/* Get pll rate by id */
|
|
static uint32_t rkclk_pll_get_rate(struct rk3188_cru *cru,
|
|
enum rk_clk_id clk_id)
|
|
{
|
|
uint32_t nr, no, nf;
|
|
uint32_t con;
|
|
int pll_id = rk_pll_id(clk_id);
|
|
struct rk3188_pll *pll = &cru->pll[pll_id];
|
|
static u8 clk_shift[CLK_COUNT] = {
|
|
0xff, APLL_MODE_SHIFT, DPLL_MODE_SHIFT, CPLL_MODE_SHIFT,
|
|
GPLL_MODE_SHIFT
|
|
};
|
|
uint shift;
|
|
|
|
con = readl(&cru->cru_mode_con);
|
|
shift = clk_shift[clk_id];
|
|
switch ((con >> shift) & APLL_MODE_MASK) {
|
|
case APLL_MODE_SLOW:
|
|
return OSC_HZ;
|
|
case APLL_MODE_NORMAL:
|
|
/* normal mode */
|
|
con = readl(&pll->con0);
|
|
no = ((con >> CLKOD_SHIFT) & CLKOD_MASK) + 1;
|
|
nr = ((con >> CLKR_SHIFT) & CLKR_MASK) + 1;
|
|
con = readl(&pll->con1);
|
|
nf = ((con >> CLKF_SHIFT) & CLKF_MASK) + 1;
|
|
|
|
return (24 * nf / (nr * no)) * 1000000;
|
|
case APLL_MODE_DEEP:
|
|
default:
|
|
return 32768;
|
|
}
|
|
}
|
|
|
|
static ulong rockchip_mmc_get_clk(struct rk3188_cru *cru, uint gclk_rate,
|
|
int periph)
|
|
{
|
|
uint div;
|
|
u32 con;
|
|
|
|
switch (periph) {
|
|
case HCLK_EMMC:
|
|
case SCLK_EMMC:
|
|
con = readl(&cru->cru_clksel_con[12]);
|
|
div = (con >> EMMC_DIV_SHIFT) & EMMC_DIV_MASK;
|
|
break;
|
|
case HCLK_SDMMC:
|
|
case SCLK_SDMMC:
|
|
con = readl(&cru->cru_clksel_con[11]);
|
|
div = (con >> MMC0_DIV_SHIFT) & MMC0_DIV_MASK;
|
|
break;
|
|
case HCLK_SDIO:
|
|
case SCLK_SDIO:
|
|
con = readl(&cru->cru_clksel_con[12]);
|
|
div = (con >> SDIO_DIV_SHIFT) & SDIO_DIV_MASK;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return DIV_TO_RATE(gclk_rate, div) / 2;
|
|
}
|
|
|
|
static ulong rockchip_mmc_set_clk(struct rk3188_cru *cru, uint gclk_rate,
|
|
int periph, uint freq)
|
|
{
|
|
int src_clk_div;
|
|
|
|
debug("%s: gclk_rate=%u\n", __func__, gclk_rate);
|
|
/* mmc clock defaulg div 2 internal, need provide double in cru */
|
|
src_clk_div = DIV_ROUND_UP(gclk_rate / 2, freq) - 1;
|
|
assert(src_clk_div <= 0x3f);
|
|
|
|
switch (periph) {
|
|
case HCLK_EMMC:
|
|
case SCLK_EMMC:
|
|
rk_clrsetreg(&cru->cru_clksel_con[12],
|
|
EMMC_DIV_MASK << EMMC_DIV_SHIFT,
|
|
src_clk_div << EMMC_DIV_SHIFT);
|
|
break;
|
|
case HCLK_SDMMC:
|
|
case SCLK_SDMMC:
|
|
rk_clrsetreg(&cru->cru_clksel_con[11],
|
|
MMC0_DIV_MASK << MMC0_DIV_SHIFT,
|
|
src_clk_div << MMC0_DIV_SHIFT);
|
|
break;
|
|
case HCLK_SDIO:
|
|
case SCLK_SDIO:
|
|
rk_clrsetreg(&cru->cru_clksel_con[12],
|
|
SDIO_DIV_MASK << SDIO_DIV_SHIFT,
|
|
src_clk_div << SDIO_DIV_SHIFT);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return rockchip_mmc_get_clk(cru, gclk_rate, periph);
|
|
}
|
|
|
|
static ulong rockchip_spi_get_clk(struct rk3188_cru *cru, uint gclk_rate,
|
|
int periph)
|
|
{
|
|
uint div;
|
|
u32 con;
|
|
|
|
switch (periph) {
|
|
case SCLK_SPI0:
|
|
con = readl(&cru->cru_clksel_con[25]);
|
|
div = (con >> SPI0_DIV_SHIFT) & SPI0_DIV_MASK;
|
|
break;
|
|
case SCLK_SPI1:
|
|
con = readl(&cru->cru_clksel_con[25]);
|
|
div = (con >> SPI1_DIV_SHIFT) & SPI1_DIV_MASK;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return DIV_TO_RATE(gclk_rate, div);
|
|
}
|
|
|
|
static ulong rockchip_spi_set_clk(struct rk3188_cru *cru, uint gclk_rate,
|
|
int periph, uint freq)
|
|
{
|
|
int src_clk_div = DIV_ROUND_UP(gclk_rate, freq) - 1;
|
|
|
|
assert(src_clk_div < 128);
|
|
switch (periph) {
|
|
case SCLK_SPI0:
|
|
assert(src_clk_div <= SPI0_DIV_MASK);
|
|
rk_clrsetreg(&cru->cru_clksel_con[25],
|
|
SPI0_DIV_MASK << SPI0_DIV_SHIFT,
|
|
src_clk_div << SPI0_DIV_SHIFT);
|
|
break;
|
|
case SCLK_SPI1:
|
|
assert(src_clk_div <= SPI1_DIV_MASK);
|
|
rk_clrsetreg(&cru->cru_clksel_con[25],
|
|
SPI1_DIV_MASK << SPI1_DIV_SHIFT,
|
|
src_clk_div << SPI1_DIV_SHIFT);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return rockchip_spi_get_clk(cru, gclk_rate, periph);
|
|
}
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
static void rkclk_init(struct rk3188_cru *cru, struct rk3188_grf *grf,
|
|
bool has_bwadj)
|
|
{
|
|
u32 aclk_div, hclk_div, pclk_div, h2p_div;
|
|
|
|
/* pll enter slow-mode */
|
|
rk_clrsetreg(&cru->cru_mode_con,
|
|
GPLL_MODE_MASK << GPLL_MODE_SHIFT |
|
|
CPLL_MODE_MASK << CPLL_MODE_SHIFT,
|
|
GPLL_MODE_SLOW << GPLL_MODE_SHIFT |
|
|
CPLL_MODE_SLOW << CPLL_MODE_SHIFT);
|
|
|
|
/* init pll */
|
|
rkclk_set_pll(cru, CLK_GENERAL, &gpll_init_cfg, has_bwadj);
|
|
rkclk_set_pll(cru, CLK_CODEC, &cpll_init_cfg, has_bwadj);
|
|
|
|
/* waiting for pll lock */
|
|
while ((readl(&grf->soc_status0) &
|
|
(SOCSTS_CPLL_LOCK | SOCSTS_GPLL_LOCK)) !=
|
|
(SOCSTS_CPLL_LOCK | SOCSTS_GPLL_LOCK))
|
|
udelay(1);
|
|
|
|
/*
|
|
* cpu clock pll source selection and
|
|
* reparent aclk_cpu_pre from apll to gpll
|
|
* set up dependent divisors for PCLK/HCLK and ACLK clocks.
|
|
*/
|
|
aclk_div = DIV_ROUND_UP(GPLL_HZ, CPU_ACLK_HZ) - 1;
|
|
assert((aclk_div + 1) * CPU_ACLK_HZ == GPLL_HZ && aclk_div <= 0x1f);
|
|
|
|
rk_clrsetreg(&cru->cru_clksel_con[0],
|
|
CPU_ACLK_PLL_MASK << CPU_ACLK_PLL_SHIFT |
|
|
A9_CPU_DIV_MASK << A9_CPU_DIV_SHIFT,
|
|
CPU_ACLK_PLL_SELECT_GPLL << CPU_ACLK_PLL_SHIFT |
|
|
aclk_div << A9_CPU_DIV_SHIFT);
|
|
|
|
hclk_div = ilog2(CPU_ACLK_HZ / CPU_HCLK_HZ);
|
|
assert((1 << hclk_div) * CPU_HCLK_HZ == CPU_ACLK_HZ && hclk_div < 0x3);
|
|
pclk_div = ilog2(CPU_ACLK_HZ / CPU_PCLK_HZ);
|
|
assert((1 << pclk_div) * CPU_PCLK_HZ == CPU_ACLK_HZ && pclk_div < 0x4);
|
|
h2p_div = ilog2(CPU_HCLK_HZ / CPU_H2P_HZ);
|
|
assert((1 << h2p_div) * CPU_H2P_HZ == CPU_HCLK_HZ && pclk_div < 0x3);
|
|
|
|
rk_clrsetreg(&cru->cru_clksel_con[1],
|
|
AHB2APB_DIV_MASK << AHB2APB_DIV_SHIFT |
|
|
CPU_PCLK_DIV_MASK << CPU_PCLK_DIV_SHIFT |
|
|
CPU_HCLK_DIV_MASK << CPU_HCLK_DIV_SHIFT,
|
|
h2p_div << AHB2APB_DIV_SHIFT |
|
|
pclk_div << CPU_PCLK_DIV_SHIFT |
|
|
hclk_div << CPU_HCLK_DIV_SHIFT);
|
|
|
|
/*
|
|
* peri clock pll source selection and
|
|
* set up dependent divisors for PCLK/HCLK and ACLK clocks.
|
|
*/
|
|
aclk_div = GPLL_HZ / PERI_ACLK_HZ - 1;
|
|
assert((aclk_div + 1) * PERI_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
|
|
|
|
hclk_div = ilog2(PERI_ACLK_HZ / PERI_HCLK_HZ);
|
|
assert((1 << hclk_div) * PERI_HCLK_HZ ==
|
|
PERI_ACLK_HZ && (hclk_div < 0x4));
|
|
|
|
pclk_div = ilog2(PERI_ACLK_HZ / PERI_PCLK_HZ);
|
|
assert((1 << pclk_div) * PERI_PCLK_HZ ==
|
|
PERI_ACLK_HZ && (pclk_div < 0x4));
|
|
|
|
rk_clrsetreg(&cru->cru_clksel_con[10],
|
|
PERI_PCLK_DIV_MASK << PERI_PCLK_DIV_SHIFT |
|
|
PERI_HCLK_DIV_MASK << PERI_HCLK_DIV_SHIFT |
|
|
PERI_ACLK_DIV_MASK << PERI_ACLK_DIV_SHIFT,
|
|
PERI_SEL_GPLL << PERI_SEL_PLL_SHIFT |
|
|
pclk_div << PERI_PCLK_DIV_SHIFT |
|
|
hclk_div << PERI_HCLK_DIV_SHIFT |
|
|
aclk_div << PERI_ACLK_DIV_SHIFT);
|
|
|
|
/* PLL enter normal-mode */
|
|
rk_clrsetreg(&cru->cru_mode_con,
|
|
GPLL_MODE_MASK << GPLL_MODE_SHIFT |
|
|
CPLL_MODE_MASK << CPLL_MODE_SHIFT,
|
|
GPLL_MODE_NORMAL << GPLL_MODE_SHIFT |
|
|
CPLL_MODE_NORMAL << CPLL_MODE_SHIFT);
|
|
|
|
rockchip_mmc_set_clk(cru, PERI_HCLK_HZ, HCLK_SDMMC, 16000000);
|
|
}
|
|
#endif
|
|
|
|
static ulong rk3188_clk_get_rate(struct clk *clk)
|
|
{
|
|
struct rk3188_clk_priv *priv = dev_get_priv(clk->dev);
|
|
ulong new_rate, gclk_rate;
|
|
|
|
gclk_rate = rkclk_pll_get_rate(priv->cru, CLK_GENERAL);
|
|
switch (clk->id) {
|
|
case 1 ... 4:
|
|
new_rate = rkclk_pll_get_rate(priv->cru, clk->id);
|
|
break;
|
|
case HCLK_EMMC:
|
|
case HCLK_SDMMC:
|
|
case HCLK_SDIO:
|
|
case SCLK_EMMC:
|
|
case SCLK_SDMMC:
|
|
case SCLK_SDIO:
|
|
new_rate = rockchip_mmc_get_clk(priv->cru, PERI_HCLK_HZ,
|
|
clk->id);
|
|
break;
|
|
case SCLK_SPI0:
|
|
case SCLK_SPI1:
|
|
new_rate = rockchip_spi_get_clk(priv->cru, PERI_PCLK_HZ,
|
|
clk->id);
|
|
break;
|
|
case PCLK_I2C0:
|
|
case PCLK_I2C1:
|
|
case PCLK_I2C2:
|
|
case PCLK_I2C3:
|
|
case PCLK_I2C4:
|
|
return gclk_rate;
|
|
default:
|
|
return -ENOENT;
|
|
}
|
|
|
|
return new_rate;
|
|
}
|
|
|
|
static ulong rk3188_clk_set_rate(struct clk *clk, ulong rate)
|
|
{
|
|
struct rk3188_clk_priv *priv = dev_get_priv(clk->dev);
|
|
struct rk3188_cru *cru = priv->cru;
|
|
ulong new_rate;
|
|
|
|
switch (clk->id) {
|
|
case PLL_APLL:
|
|
new_rate = rkclk_configure_cpu(priv->cru, priv->grf, rate,
|
|
priv->has_bwadj);
|
|
break;
|
|
case CLK_DDR:
|
|
new_rate = rkclk_configure_ddr(priv->cru, priv->grf, rate,
|
|
priv->has_bwadj);
|
|
break;
|
|
case HCLK_EMMC:
|
|
case HCLK_SDMMC:
|
|
case HCLK_SDIO:
|
|
case SCLK_EMMC:
|
|
case SCLK_SDMMC:
|
|
case SCLK_SDIO:
|
|
new_rate = rockchip_mmc_set_clk(cru, PERI_HCLK_HZ,
|
|
clk->id, rate);
|
|
break;
|
|
case SCLK_SPI0:
|
|
case SCLK_SPI1:
|
|
new_rate = rockchip_spi_set_clk(cru, PERI_PCLK_HZ,
|
|
clk->id, rate);
|
|
break;
|
|
default:
|
|
return -ENOENT;
|
|
}
|
|
|
|
return new_rate;
|
|
}
|
|
|
|
static struct clk_ops rk3188_clk_ops = {
|
|
.get_rate = rk3188_clk_get_rate,
|
|
.set_rate = rk3188_clk_set_rate,
|
|
};
|
|
|
|
static int rk3188_clk_of_to_plat(struct udevice *dev)
|
|
{
|
|
if (CONFIG_IS_ENABLED(OF_REAL)) {
|
|
struct rk3188_clk_priv *priv = dev_get_priv(dev);
|
|
|
|
priv->cru = dev_read_addr_ptr(dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk3188_clk_probe(struct udevice *dev)
|
|
{
|
|
struct rk3188_clk_priv *priv = dev_get_priv(dev);
|
|
enum rk3188_clk_type type = dev_get_driver_data(dev);
|
|
|
|
priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
if (IS_ERR(priv->grf))
|
|
return PTR_ERR(priv->grf);
|
|
priv->has_bwadj = (type == RK3188A_CRU) ? 1 : 0;
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct rk3188_clk_plat *plat = dev_get_plat(dev);
|
|
|
|
priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]);
|
|
#endif
|
|
|
|
rkclk_init(priv->cru, priv->grf, priv->has_bwadj);
|
|
|
|
/* Init CPU frequency */
|
|
rkclk_configure_cpu(priv->cru, priv->grf, APLL_SAFE_HZ,
|
|
priv->has_bwadj);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk3188_clk_bind(struct udevice *dev)
|
|
{
|
|
int ret;
|
|
struct udevice *sys_child;
|
|
struct sysreset_reg *priv;
|
|
|
|
/* The reset driver does not have a device node, so bind it here */
|
|
ret = device_bind_driver(dev, "rockchip_sysreset", "sysreset",
|
|
&sys_child);
|
|
if (ret) {
|
|
debug("Warning: No sysreset driver: ret=%d\n", ret);
|
|
} else {
|
|
priv = malloc(sizeof(struct sysreset_reg));
|
|
priv->glb_srst_fst_value = offsetof(struct rk3188_cru,
|
|
cru_glb_srst_fst_value);
|
|
priv->glb_srst_snd_value = offsetof(struct rk3188_cru,
|
|
cru_glb_srst_snd_value);
|
|
dev_set_priv(sys_child, priv);
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(RESET_ROCKCHIP)
|
|
ret = offsetof(struct rk3188_cru, cru_softrst_con[0]);
|
|
ret = rockchip_reset_bind(dev, ret, 9);
|
|
if (ret)
|
|
debug("Warning: software reset driver bind faile\n");
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id rk3188_clk_ids[] = {
|
|
{ .compatible = "rockchip,rk3188-cru", .data = RK3188_CRU },
|
|
{ .compatible = "rockchip,rk3188a-cru", .data = RK3188A_CRU },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(rockchip_rk3188_cru) = {
|
|
.name = "rockchip_rk3188_cru",
|
|
.id = UCLASS_CLK,
|
|
.of_match = rk3188_clk_ids,
|
|
.priv_auto = sizeof(struct rk3188_clk_priv),
|
|
.plat_auto = sizeof(struct rk3188_clk_plat),
|
|
.ops = &rk3188_clk_ops,
|
|
.bind = rk3188_clk_bind,
|
|
.of_to_plat = rk3188_clk_of_to_plat,
|
|
.probe = rk3188_clk_probe,
|
|
};
|