u-boot/include/configs/armadillo-800eva.h
Tom Rini eaf6ea6a1d Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR
- Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack
  pointer directly, otherwise we use the common calculation.
- On some platforms that were using the standard calculation but did not
  set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them.
- On a small number of platforms that were not subtracting
  GENERATED_GBL_DATA_SIZE do so now via the standard calculation.
- CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most
  board config header files.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06 12:09:19 -04:00

67 lines
1.7 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Configuation settings for the bonito board
*
* Copyright (C) 2012 Renesas Solutions Corp.
*/
#ifndef __ARMADILLO_800EVA_H
#define __ARMADILLO_800EVA_H
#define CONFIG_SH_GPIO_PFC
#include <asm/arch/rmobile.h>
#define BOARD_LATE_INIT
#define CONFIG_TMU_TIMER
#define CONFIG_SYS_TIMER_COUNTS_DOWN
#define CONFIG_SYS_TIMER_COUNTER (TMU_BASE + 0xc) /* TCNT0 */
#define CONFIG_SYS_TIMER_RATE (get_board_sys_clk() / 4)
/* STACK */
#define STACK_AREA_SIZE 0xC000
#define LOW_LEVEL_MERAM_STACK \
(SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
/* MEMORY */
#define ARMADILLO_800EVA_SDRAM_BASE 0x40000000
#define ARMADILLO_800EVA_SDRAM_SIZE (512 * 1024 * 1024)
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
/* SCIF */
#define SCIF0_BASE 0xe6c40000
#define SCIF1_BASE 0xe6c50000
#define SCIF2_BASE 0xe6c60000
#define SCIF4_BASE 0xe6c80000
#define CONFIG_SCIF_A
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
#define CONFIG_SYS_SDRAM_BASE (ARMADILLO_800EVA_SDRAM_BASE)
#define CONFIG_SYS_SDRAM_SIZE (ARMADILLO_800EVA_SDRAM_SIZE)
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
/* FLASH */
#define CONFIG_SYS_FLASH_BASE 0x00000000
#define CONFIG_SYS_MAX_FLASH_SECT 512
#define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) }
#define CONFIG_SYS_FLASH_ERASE_TOUT 3000
#define CONFIG_SYS_FLASH_WRITE_TOUT 3000
#define CONFIG_SYS_FLASH_LOCK_TOUT 3000
#define CONFIG_SYS_FLASH_UNLOCK_TOUT 3000
/* ENV setting */
/* SH Ether */
#define CONFIG_SH_ETHER_USE_PORT 0
#define CONFIG_SH_ETHER_PHY_ADDR 0x0
#define CONFIG_SH_ETHER_BASE_ADDR 0xe9a00000
#define CONFIG_SH_ETHER_SH7734_MII (0x01)
#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII
#endif /* __ARMADILLO_800EVA_H */