u-boot/configs/mx53ppd_defconfig
Denis Zalevskiy 4c55208350 board: ge: Move VPD EEPROM configuration to the defconfig
Use standard configuration logic to define EEPROM constants.
Names are based on VPD_EEPROM_ prefix because EEPROM_ is already
used by i2c_eeprom driver.

Signed-off-by: Denis Zalevskiy <denis.zalevskiy@ge.com>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
2018-12-17 10:46:04 +01:00

51 lines
1.3 KiB
Text

CONFIG_ARM=y
CONFIG_ARCH_MX5=y
CONFIG_SYS_TEXT_BASE=0x77800000
CONFIG_TARGET_MX53PPD=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/ge/mx53ppd/imximage.cfg"
CONFIG_BOOTDELAY=1
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
# monitor's EEPROM is connected to the bus through the mux channel 1
# (the number is the offset in CONFIG_SYS_I2C_BUSES)
# (there is also Frame EEPROM connected to the channel 4 (bus 4))
CONFIG_SYS_VPD_EEPROM_I2C_BUS=2
# Address of Atmel 24C08 EEPROM
CONFIG_SYS_VPD_EEPROM_I2C_ADDR=0x50
CONFIG_SYS_VPD_EEPROM_I2C_ADDR_LEN=1
CONFIG_SYS_VPD_EEPROM_SIZE=1024
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_MISC_INIT_R=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_EXT=y
CONFIG_BOOTCOUNT_BOOTLIMIT=10
CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="0:5"
CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000
CONFIG_FSL_ESDHC=y
CONFIG_MII=y
CONFIG_RTC_S35392A=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_IMX_WATCHDOG=y
CONFIG_OF_LIBFDT=y